Hi all

[Missioner]

Hi everyone.

I am Missioner. Based in the far end of the East Rand.

Not new to vaping, but new to trying new things with my dropper and RTA.

Looking forward to meeting up with new folks and learning more about my one vice.

Sent from my Redmi Note 4 using Tapatalk

 

[Random264]

Welcome @Missioner , I'm sure you will learn alot on this forum. Plenty of knowledgeable vapers here.

 

[Grand Guru]

welcome to the community @Missioner

 

[Stranger]

Howzit

 

[DarthBranMuffin]

Welcome @Missioner !!!!

 

[Puff the Magic Dragon]

Welcome @Missioner

You can learn plenty about RDAs and RTAs here. Just ask if you need help.

 

[vicTor]

Hi everyone.

I am Missioner. Based in the far end of the East Rand.

Not new to vaping, but new to trying new things with my dropper and RTA.

Looking forward to meeting up with new folks and learning more about my one vice.

Sent from my Redmi Note 4 using Tapatalk

welcome !

 

[Missioner]

Shot for warm welcome.

I am a mechanic by profession so if you have motoring related stuff send it my way.

As for the reason for joining, I have bought new coils for my RTA and have been battling to get them to not roast cotton and produce vapour.

Online searches seem to indicate that I may have been firing them way too hot, so I will rewick for the 3rd time and try again.

Sent from my Redmi Note 4 using Tapatalk

 

[Paul33]

Shot for warm welcome.

I am a mechanic by profession so if you have motoring related stuff send it my way.

As for the reason for joining, I have bought new coils for my RTA and have been battling to get them to not roast cotton and produce vapour.

Online searches seem to indicate that I may have been firing them way too hot, so I will rewick for the 3rd time and try again.

Sent from my Redmi Note 4 using Tapatalk

What coils are you using and what device and what atomiser? I’m sure between all of us here we can scrape a few brain cells together and help you out!

 

[Mzr]

Welcome @Missioner could you maybe give some more information as to how the cotton is being roasted like @Paul33 mentioned maybe start by giving info regarding your setup.

 

[Paul33]

Welcome @Missioner could you maybe give some more information as to how the cotton is being roasted like @Paul33 mentioned maybe start by giving info regarding your setup.

And some pictures!

 

[Silver]

Welcome @Missioner
Enjoy your stay here

take a photo of your vape and show us what you have, I’m sure we can try advise

 

[Resistance]

Welcome

 

[ARYANTO]

Welcome @Missioner , enjoy your stay , here is a lot of Pro , pro's that can and will advice you on your journey to your''happy place ''

 

[Missioner]

These are my 2 most used mods. The Genie is a very underrated mod and still gives multi day battery life. Please excuse my dirty hands.

I also have a Voopoo Drag 2 which I don't really enjoy using. It doesn't fit my hand very well.

I think I have managed to get the problem somewhat solved with the tank and coil setup. I wicked the RTA again and slowly turned up the Watts till it started to work without burning.

Sent from my Redmi Note 4 using Tapatalk

 

[Missioner]

Pic of Vaporesso

Sent from my Redmi Note 4 using Tapatalk

 

[Stranger]

I note that you have it on hard setting, this will ramp it up initially and possibly cause that burnt taste.

 

[Missioner]

Coils and cotton

Sent from my Redmi Note 4 using Tapatalk

 

[Missioner]

I note that you have it on hard setting, this will ramp it up initially and possibly cause that burnt taste.

Noted and adjusted

Sent from my Redmi Note 4 using Tapatalk

 

[Missioner]

Coil

Sent from my Redmi Note 4 using Tapatalk

 

[Missioner]

Part of the issue I think is that I have pretty much stuck to my first tank and coil set, it has worked nearly flawlessly for the last 2 years. The cotton lasted well and it made good flavour and dense clouds.

This is a new tank and coil set that I have bought recently, I was having trouble working out the kinks.

Sent from my Redmi Note 4 using Tapatalk

 

[Stranger]

Coil looks good to me, I note 0.22.

The next things we can possibly look at is your juice mix. If your PG content is too low for that sub ohm coil, that could also combined with the hard setting cause an initial burnt taste.

 

[Stranger]

How often do you ?

Clean coil ?

Change coil ?

Change cotton ?

 

[Quintusson]

Hi @Missioner. And welcome to the forum

I note that you have it on hard setting, this will ramp it up initially and possibly cause that burnt taste.

I agree with Stranger's comments here. If you put it on 'hard' it will ramp up very quickly versus normal, so it is for a quick, sharp inhale and not a drawn out smooth inhale. I see you did mention you adjusted it, which should already help out a lot.

As you are using coils measuring 0.22Ohm, 70W should be sufficient, however just to note that I am using a dual coil setup at 0.2Ohm and I vape at 95W, so you can ramp that up even a bit more if you like; if however you are using a single coil setup, then rather stick to 70W. If you want more vapour, and you're willing to spend a bit of money, then maybe look at getting a dual coil tank - just note that you may have to get other coils as well because if a single pushes 0.22Ohm, you're going to get 0.11Ohm on a dual and then we're talking serious wattage (and juice usage!).

 

[Missioner]

FYI the Dead Rabbit is a dual setup.

The coils are 0.35ohm each.

On my previous coils I was vaping at 90W happily.

This is an entirely new set including the tank.

I have a V1 tank that I have had since starting vaping and was very happy.

Since I can't stay in one place for too long I wanted to try something new and got some new goodies to see if the grass is greener. Anyway getting the new stuff to work the same as the old set has been a mission.

So I seem to be getting it right. I am grateful for your suggestions and guidance.



Sent from my Redmi Note 4 using Tapatalk