How to use TC

dc78ab0d23384b7c1673e81412c13a9e.jpg
go here

944ad3df03871bf2f6953c9eddf6f585.jpg

Then here

1d69e0166d9978edd2cf7642f9ab7e18.jpg

Then set ohms here it wil only allow about .2 or .02 adjustment but will make a difference

Sent from my LG-H815 using Tapatalk
 
@Imtiaaz luckily i am nosy hahaha so you can ply wit it there i tend to go low on ohms as low as i can hehe then it can go up as you vape in tc but will fall back to that initial figure

Sent from my LG-H815 using Tapatalk
 
@Imtiaaz luckily i am nosy hahaha so you can ply wit it there i tend to go low on ohms as low as i can hehe then it can go up as you vape in tc but will fall back to that initial figure

Sent from my LG-H815 using Tapatalk

I think I must also become nosy @mcgeerj35, maybe I will learn a thing or two, I'm always so scared to mess with the settings and then destroy my vape experience. Like this coil building is so intimidating but I have the knowledge now I need to practice, luckily I have a backup device.
 
Yeah it is but i dont think it will sommer destroy a vape that easy but anything is possible but i must say i read up before i just do but let us know if it works out for you mr @Imtiaaz

Sent from my LG-H815 using Tapatalk
 
Yeah it is but i dont think it will sommer destroy a vape that easy but anything is possible but i must say i read up before i just do but let us know if it works out for you mr @Imtiaaz

Sent from my LG-H815 using Tapatalk

Hello again @mcgeerj35, it did in fact work and the Ohm's are now as expected and it vapes as it did before. I also just got back from the vape shop and got me some SS wire and cotton.

I'm ready to start building, as I purchased a coilmaster build kit on Sunday, that comes with some coil jigs,ohm reader and all the other goodies:clap:. WISH ME LUCK!
 
Last edited:
Good luck buddy its not that difficult only ******** sorry about the french but lets call it what it is hahaha but just practice the wicking part and you will be fine buddy

Sent from my LG-H815 using Tapatalk
 
Hello again @mcgeerj35, it did in fact work and the Ohm's are now as expected and it vapes as it did before. I also just got back from the vape shop and got me some SS wire and cotton.

I'm ready to start building, as I purchased a coilmaster build kit on Sunday, that comes with some coil jigs,ohm reader and all the other goodies:clap:. WISH ME LUCK!
Awesome! Remember to post a pic of your first build :) Once you start building, you can't go back, it opens up a whole new world of fun and opportunities.
 
Ooh! I'm loving temp control! It's one of the best developments in vaping imho - as you can really tweak your vape experience with it.

For example, when I've been vaping for a while at a higher temp and my throat starts to feel it, I dial the temp down and can enjoy a much cooler vape without sacrificing flavour or clouds. This also helped me vape through a sore throat recently!

SS also gives me the "cleanest" vape versus Ni and Ti - pure flavour without any metallic after taste.

I've just started playing around with TCR for SS316L and find if I set it between 0090 and 0108 I get another level of temp control - the higher the setting the warmer the vape.

Then there are the other advantages like extended battery life and no more dry hits, ever :D

How does it go? Winner, winner...?
 
Ooh! I'm loving temp control! It's one of the best developments in vaping imho - as you can really tweak your vape experience with it.

For example, when I've been vaping for a while at a higher temp and my throat starts to feel it, I dial the temp down and can enjoy a much cooler vape without sacrificing flavour or clouds. This also helped me vape through a sore throat recently!

SS also gives me the "cleanest" vape versus Ni and Ti - pure flavour without any metallic after taste.

I've just started playing around with TCR for SS316L and find if I set it between 0090 and 0108 I get another level of temp control - the higher the setting the warmer the vape.

Then there are the other advantages like extended battery life and no more dry hits, ever :D

How does it go? Winner, winner...?

Chicken dinner @Huffapuff, I'm all excited now to build me these SS coils and start playing around with it, thanks for the insight buddy, really appreciate it!
 
Hi Guys, I have a Kangertech Toptank kit, when i go into TC mode I cannot set the wattage the device sets for me. Is there a way to change this or is it best to keep as is?
 
Hi Guys, I have a Kangertech Toptank kit, when i go into TC mode I cannot set the wattage the device sets for me. Is there a way to change this or is it best to keep as is?
If I remember correctly, that is the way Kangertech's TC works and you cannot change it.
 
thanks so much for this thread. I have been vaping for 11 months now and only now understand TC and using it with SS316 wire today. Wowowowow wish I knew sooner how awesome this was lol !!
 
@Andre thanks

used TC mode on Ni200 and SS, the Stainless Steel is the best. Lots of flavour compared to Ni200. I just wish vendors would stock the SS coils for the device. It seems the SS coil Pink ring only came with the kit.
Hopefully with some courage I will get into building my own coils
 
thanks so much for this thread. I have been vaping for 11 months now and only now understand TC and using it with SS316 wire today. Wowowowow wish I knew sooner how awesome this was lol !!

I'm glad we all took something away from this thread @Frikkie6000, so awesome to have such an abundance of experience on this forum that can help us realize the potential of our Mods.

Thanks for all the advise guys.
 
Hi guys,

Please don't be too harsh but as promised here's my first build, I know its not perfect but could be alot worse. It works waaay better than the stock chip coil. Managed to get it fire perfectly,glows from centre, no hotspots and straightened it out a bit more after the pic.

30mm ID, SS, 8 wraps coming in at 0.23 ohm's

20160813_000007.jpg
Pic rotated, edited and resized by the secret Porcupine!
 
Last edited by a moderator:
Please let me know if the pick uploaded..I cant seem to see it
I can see the thumbnail but not the full image.. looks very good though.. helluffa lot better than my first coils.. good job, how's the vape?

Sent from my HTC One_M8 using Tapatalk
 
Hi guys,

Please don't be too harsh but as promised here's my first build, I know its not perfect but could be alot worse. It works waaay better than the stock chip coil. Managed to get it fire perfectly,glows from centre, no hotspots and straightened it out a bit more after the pic.

30mm ID, SS, 8 wraps coming in at 0.23 ohm's

View attachment 63548
Pic rotated, edited and resized by the secret Porcupine!

Looks good man. Thumbs up
 
Hey @Imtiaaz
That is outstanding for your first coil! A dual as well!
Picture looks great.

Gosh, my first coil looked like a worm gone wrong

Hope the vape is good!
Enjoy

PS - im sure you mean 3mm diameter and not 30mm
 
Thank you for the kind words @SAVaper and @Silver. The vape is very nice, it doesn't take ages to saturate anymore,so I can chain vape a bit more. I'm sure it will be a better on the next one.

I wasted so much cotton trying to wick it for the first time, but I eventually got it right, and am happy.

What are you guys thoughts about spaced vs contact coils? I am thinking of making a contact coil for the next build, will really like to hear your thoughts.
 
Back
Top