iJust 2 coils, tips needed

[Imotions]

Hi guys
Any tips on making my i just 2 coils last a bit longer .3 and .5 ohm coils last me max a week and i start getting a burnt taste on long drags this is vaping on between 45 50 55 and 60 watts

Sent from my SM-G920F using Tapatalk

 

[zadiac]

Have you tried lowering your watts and see what it does? Also, what ratio PG/VG juice are you using? Maybe the coils not saturated enough and you can get a burnt taste from that.

 

[Jan]

What about the RBA? had a look at one last night seems very decent and easy to rebuild

 

[Imotions]

@zadiac it happens like after a week of vaping on the same coil it gets a burnt taste... coils are always left practically over night to soak up the goodness.... lower watts im not getting any flavour or any hits like i want ...
@Jan RBA? meaning sorry for the dumb ?

Sent from my SM-G920F using Tapatalk

 

[Redeemer]

@zadiac it happens like after a week of vaping on the same coil it gets a burnt taste... coils are always left practically over night to soak up the goodness.... lower watts im not getting any flavour or any hits like i want ...
@Jan RBA? meaning sorry for the dumb ?

Sent from my SM-G920F using Tapatalk

You get a Rebuildable Coil (RBA) that fits the Triton/Triton 2/ iJust 2. The one I got was meant for a Triton, and fits all three mentioned tanks so far.

 

[Jan]

@zadiac it happens like after a week of vaping on the same coil it gets a burnt taste... coils are always left practically over night to soak up the goodness.... lower watts im not getting any flavour or any hits like i want ...
@Jan RBA? meaning sorry for the dumb ?

Sent from my SM-G920F using Tapatalk

No such thing as dumb. It is a coil that you can rebuild. So you buy the wire make your own coil and put your own cotton in. In the long run you save a lot of money on coils because you can re use the RBA and don't have to continuously buy new coils and with a little bit of knowledge and some YouTube you can basically customize your coil for how you like it ie you can make a o.4 , 0.55ohm etc coil.

I am sure if you do a search you will find vendors that stock the RBA coil and then look for videos on how to do the build

 

[Jan]

http://www.sirvape.co.za/products/ijust-2-melo-2-rebuildable-head

 

[Nightwalker]

Dude. Throw away the .5
Secondly that's how long my coils last if I'm lucky. But I'm on 20pg80vg

 

[Imotions]

Im using 70vg 30pg so my way forward is building coils or rather buy pre made coils as im not in one to wrap and measure ohm etc... will premade coils suffice where i just stick it in add cotton etc ? Only sticking to these coils because of this reason come to think of it

Sent from my SM-G920F using Tapatalk

 

[Imotions]

Are you talking of something like the theorem tank? Or whats recommended for me as a beginner..

Sent from my SM-G920F using Tapatalk

 

[Andre]

Im using 70vg 30pg so my way forward is building coils or rather buy pre made coils as im not in one to wrap and measure ohm etc... will premade coils suffice where i just stick it in add cotton etc ? Only sticking to these coils because of this reason come to think of it

Sent from my SM-G920F using Tapatalk

Yip, that should work. Get some with an ID of 2.5 or max 3 mm for the RBA.

 

[Imotions]

Ohk good stuff approx how long will a rba coil last though? Also what would i need to get started... my current setup is pico 75w with obvious ijust2 tank or meloIII tank ..... would i need the volt meter and stuff if im going the route of premade coils? So many questions so little space lol

Sent from my SM-G920F using Tapatalk

 

[Andre]

Ohk good stuff approx how long will a rba coil last though? Also what would i need to get started... my current setup is pico 75w with obvious ijust2 tank or meloIII tank ..... would i need the volt meter and stuff if im going the route of premade coils? So many questions so little space lol

Sent from my SM-G920F using Tapatalk

Coil can last a long time - up to a month. No voltmeter and stuff required as you will know the resistance of the pre-made coils your buy. And your Pico will also tell you the resistance. For wicks I recommend the Cotton Bacon V2.

 

[Imotions]

Good stuff now i need to visit a vape store and check options... onto another major crisis in my vape life i need help on is how in the world do i save juice lol damn

Sent from my SM-G920F using Tapatalk

 

[Jan]

 

[Jan]

If you use thicker wire than in the video you will get a lower build.

 

[Imotions]

Thanks guys highly appreciated alot has been cleared out for me now only thing left to get the goods lol

Sent from my SM-G920F using Tapatalk

 

[Imotions]

Howsit guys another question if i get say the MutationX V4S rda can i put pre made coils on it? Would it work though

Sent from my SM-G920F using Tapatalk

 

[Redeemer]

Howsit guys another question if i get say the MutationX V4S rda can i put pre made coils on it? Would it work though

Sent from my SM-G920F using Tapatalk

You mean pre-wrapped coils, that you will still wick yourself with cotton?
Then yes, they will work.

 

[Imotions]

Yes Redeemer same onesohk kewl so then now im stuck after reading up on things... is RTA RDTA essentially the same thing? And RDA is strictly dripper.... what a better option for building coils in future RDA RDTA RTA?

Sent from my SM-G920F using Tapatalk

 

[Redeemer]

Yes Redeemer same onesohk kewl so then now im stuck after reading up on things... is RTA RDTA essentially the same thing? And RDA is strictly dripper.... what a better option for building coils in future RDA RDTA RTA?

Sent from my SM-G920F using Tapatalk

Start building on a dripper (RDA), as its very straight forward. A RDTA is basically a dripper, with a tank capacity for juice instead of just the juice wells in a RDA.
RTA is the more difficult one, since space in a tank is very limited, so your coils only have a small margin or tolerance to fit the build deck and not short out.

 

[Imotions]

Sweet so whats the cheapest RDA i can start with lol dont wanna bust the bank on one and i dont like using it

Sent from my SM-G920F using Tapatalk

 

[Redeemer]

Sweet so whats the cheapest RDA i can start with lol dont wanna bust the bank on one and i dont like using it

Sent from my SM-G920F using Tapatalk

Any clone RDA should do, from one of the reputable vendors here on the site.
That way its cheap, you get to know your preferences, and you pay almost a fifth of the value of an authentic. If you like the clone and it suits your vaping needs, then consider getting the Authentic as a long term investment.

 

[Imotions]

Ohk kewl stuff... is it worth getting a drip box as an entire new device or just a rda ?

Sent from my SM-G920F using Tapatalk

 

[Andre]

Ohk kewl stuff... is it worth getting a drip box as an entire new device or just a rda ?

Sent from my SM-G920F using Tapatalk

Dripbox is cool, you can even buy pre-wrapped and pre-wicked coils for it. Does need a proper battery like a Samsung 25R.