is this acceptable wrapping?

Angelus

Experienced Vaper
LV
23
 
Joined
29/5/17
Posts
171
Awards
16
Location
Durban
good day everyone

quite sometime ago i got my bats rewrapped and i have not used them since as i have been using another mod that uses another battery set. so earlier today i noticed my one battery that i use in my hex on the negative side there seems to be a type of bulge by the rim so i'm quite hesitant to use it again.

this lock down has not been good for me

but when i bought a new mod i couldnt get new bats coz they were sold out and are still sold out i was wanting to use the new one so i could give my hex a break for awhile , but now that the one bat looks kinda strange and also on the wraps there seem to be lil holes forming around the positive ring side. so i'm using the best looking ones in my hex at the moment.

in the mean while i have emailed a retailer asking about ordering ect.

so anyway back to my original question this set of 4 18560's i bought i thinking to use in my new mod but the way that they are wrapped i dont know if i can use them as is. and if not then i have to order wraps which will be a 3 day wait in anycase.

my new mod takes 18650's , 20700's and 21700's , i really want to wait to buy the 21700's to use instead of having to use the battery adaptor in the regulated mod, i just dont like the idea of adaptors .... if it is made to fit 21700 then i would rather put 21700 in the mod.

anyway please can you have a look at these bats and how they are wrapped or shall i wait and rewrap ... also i was not the person that wrapped these

IMG_4382.jpg IMG_4383.jpg IMG_4384.jpg IMG_4385.jpg
 
good day everyone

quite sometime ago i got my bats rewrapped and i have not used them since as i have been using another mod that uses another battery set. so earlier today i noticed my one battery that i use in my hex on the negative side there seems to be a type of bulge by the rim so i'm quite hesitant to use it again.

this lock down has not been good for me

but when i bought a new mod i couldnt get new bats coz they were sold out and are still sold out i was wanting to use the new one so i could give my hex a break for awhile , but now that the one bat looks kinda strange and also on the wraps there seem to be lil holes forming around the positive ring side. so i'm using the best looking ones in my hex at the moment.

in the mean while i have emailed a retailer asking about ordering ect.

so anyway back to my original question this set of 4 18560's i bought i thinking to use in my new mod but the way that they are wrapped i dont know if i can use them as is. and if not then i have to order wraps which will be a 3 day wait in anycase.

my new mod takes 18650's , 20700's and 21700's , i really want to wait to buy the 21700's to use instead of having to use the battery adaptor in the regulated mod, i just dont like the idea of adaptors .... if it is made to fit 21700 then i would rather put 21700 in the mod.

anyway please can you have a look at these bats and how they are wrapped or shall i wait and rewrap ... also i was not the person that wrapped these

View attachment 199695 View attachment 199696 View attachment 199697 View attachment 199698

I would use it. The positive side looks safe enough ,but have tagged a few experts for their opinion.
 
good day everyone

quite sometime ago i got my bats rewrapped and i have not used them since as i have been using another mod that uses another battery set. so earlier today i noticed my one battery that i use in my hex on the negative side there seems to be a type of bulge by the rim so i'm quite hesitant to use it again.

this lock down has not been good for me

but when i bought a new mod i couldnt get new bats coz they were sold out and are still sold out i was wanting to use the new one so i could give my hex a break for awhile , but now that the one bat looks kinda strange and also on the wraps there seem to be lil holes forming around the positive ring side. so i'm using the best looking ones in my hex at the moment.

in the mean while i have emailed a retailer asking about ordering ect.

so anyway back to my original question this set of 4 18560's i bought i thinking to use in my new mod but the way that they are wrapped i dont know if i can use them as is. and if not then i have to order wraps which will be a 3 day wait in anycase.

my new mod takes 18650's , 20700's and 21700's , i really want to wait to buy the 21700's to use instead of having to use the battery adaptor in the regulated mod, i just dont like the idea of adaptors .... if it is made to fit 21700 then i would rather put 21700 in the mod.

anyway please can you have a look at these bats and how they are wrapped or shall i wait and rewrap ... also i was not the person that wrapped these

View attachment 199695 View attachment 199696 View attachment 199697 View attachment 199698
The wraps look mostly fine. What you need to be careful of is side tears because the positive terminal and negative terminal are very close together. You want to avoid any contact that will be a dead short (if the hare battery is exposed) on the battery like a key or the metal tube of some mod battery holders.

When in doubt, rewrap. If you are in jhb south I can get you some wraps for gratis.

Pic for some clarity. The red is positive and blue negative.
F5D08B2C-2E8B-439D-9191-BBE4D2FCD1E3.jpeg
upload_2020-6-28_21-6-8.jpeg
 
good day everyone

quite sometime ago i got my bats rewrapped and i have not used them since as i have been using another mod that uses another battery set. so earlier today i noticed my one battery that i use in my hex on the negative side there seems to be a type of bulge by the rim so i'm quite hesitant to use it again.

this lock down has not been good for me

but when i bought a new mod i couldnt get new bats coz they were sold out and are still sold out i was wanting to use the new one so i could give my hex a break for awhile , but now that the one bat looks kinda strange and also on the wraps there seem to be lil holes forming around the positive ring side. so i'm using the best looking ones in my hex at the moment.

in the mean while i have emailed a retailer asking about ordering ect.

so anyway back to my original question this set of 4 18560's i bought i thinking to use in my new mod but the way that they are wrapped i dont know if i can use them as is. and if not then i have to order wraps which will be a 3 day wait in anycase.

my new mod takes 18650's , 20700's and 21700's , i really want to wait to buy the 21700's to use instead of having to use the battery adaptor in the regulated mod, i just dont like the idea of adaptors .... if it is made to fit 21700 then i would rather put 21700 in the mod.

anyway please can you have a look at these bats and how they are wrapped or shall i wait and rewrap ... also i was not the person that wrapped these

View attachment 199695 View attachment 199696 View attachment 199697 View attachment 199698

Those look fine enough. Just be careful for tears on the sides on the wrap and at the top as well. Negative and positive are pretty close to eaxh other at the top of the batteries so you want to be careful that the wraps don't tear and lead to a short (ie, possible Kaboom sound).

At some point I'd rewrap those batteries though--but that's more just my OCD not being able to deal with misaligned wraps.

If you're stuck for wraps just shout- I'm sure there are some of us here who can help make a plan and get some wraps and insulators to you.
 
I agree with what the experts have said.

I have always double wrapped batteries that have thin original wrapping. It is so easy to do and takes about a minute per battery. The most important aspect is to remember to replace the insulator at the positive terminal if you have removed the original wrap.

If you cant find decent thick wraps then I would recommend double wrapping. I use transparent wrap over the original using a hairdryer.

 
The wraps look mostly fine. What you need to be careful of is side tears because the positive terminal and negative terminal are very close together. You want to avoid any contact that will be a dead short (if the hare battery is exposed) on the battery like a key or the metal tube of some mod battery holders.

When in doubt, rewrap. If you are in jhb south I can get you some wraps for gratis.

Pic for some clarity. The red is positive and blue negative.
View attachment 199713
View attachment 199714

thanks for this Christos reading your reply and actually seeing the attachments help me understand more

Those look fine enough. Just be careful for tears on the sides on the wrap and at the top as well. Negative and positive are pretty close to eaxh other at the top of the batteries so you want to be careful that the wraps don't tear and lead to a short (ie, possible Kaboom sound).

At some point I'd rewrap those batteries though--but that's more just my OCD not being able to deal with misaligned wraps.

If you're stuck for wraps just shout- I'm sure there are some of us here who can help make a plan and get some wraps and insulators to you.

lol i think i have the same ocd problem lol

I’m more concerned about the discolouration at the bottom of those batteries. How long have you been using them @Angelus ?

um iam really really not sure how old they are maybe 1/2 years

I agree with what the experts have said.

I have always double wrapped batteries that have thin original wrapping. It is so easy to do and takes about a minute per battery. The most important aspect is to remember to replace the insulator at the positive terminal if you have removed the original wrap.

If you cant find decent thick wraps then I would recommend double wrapping. I use transparent wrap over the original using a hairdryer.



yes i have heard of this idea and i loveeeeeeeeeeeee the idea of double wrapping

have never found clear wraps though ... they are invisible i tell you lol
 
Just an update I have gone ahead and ordered new batteries but not sure on the eta but it from jhb to dbn .... mean while I going to need to go wrap hunting
 
Discolouration just looks like scratching the metal till it's shiny. Caused by prolonged use in a "tight" battery tray. Absolutely nothing to worry about imo. It definitely doesn't look like carbon build up from arching. Which itself, is not an issue.
 
Just an update I have gone ahead and ordered new batteries but not sure on the eta but it from jhb to dbn .... mean while I going to need to go wrap hunting
Hi Angelus... if you in the northern side if town... Sir Vape is open for business and if you in the Southern side of town ... E cig inn is open for business... check out their web sites... ( so no hunting needed, just not sure if they have clear wraps )
 
The wraps look mostly fine. What you need to be careful of is side tears because the positive terminal and negative terminal are very close together. You want to avoid any contact that will be a dead short (if the hare battery is exposed) on the battery like a key or the metal tube of some mod battery holders.

When in doubt, rewrap. If you are in jhb south I can get you some wraps for gratis.

Pic for some clarity. The red is positive and blue negative.
View attachment 199713
View attachment 199714

I like put tape between/on that spot where you marked the red and the blue horizontal line. I can't double wrap, doesn't fit in my mod, so I do this instead.
 
omw i just got the new battery sets delivered and omw the 21700 dont fit in my nitecore d4 .... i didnt even think to check my charger lol but atleast i ordered both 21700 and 18650's :-D

@Gringo i thought that the stores doing online only at the moment
 
omw i just got the new battery sets delivered and omw the 21700 dont fit in my nitecore d4 .... i didnt even think to check my charger lol but atleast i ordered both 21700 and 18650's :-D

@Gringo i thought that the stores doing online only at the moment
Nope some are open... you just need to do you thing... at a distance and then get out ... :wait:
 
Scuse the ignorance, but how unsafe is it to vape a battery that has damage in the wrap on only regulated devices?
 
Scuse the ignorance, but how unsafe is it to vape a battery that has damage in the wrap on only regulated devices?

The best rule is to not use a battery with a torn or damaged wrapper, until you can get them re-wrapped.
Also remember to inspect batteries in rotation regularly for tears or damage.

The 'regulated' part is pretty meaningless when you consider the location of the batteries in the battery sled.

In dual / multiple battery mods, batteries are always in close proximity to each other and usually positioned in a way that reduces the intricacies of connecting them all in series. It means that they are typically inserted in different orientations with adjacent batteries sharing at least one directly connected negative and positive pole. If two with a common connected positive and negative terminal touches while their bodies are exposed, that would mean a dead short across one of them and it will likely vent the battery.

It may not be so much of a problem in single battery mods made from non-metallic components like wood, resin or some plastics, but sanity should prevail and the same rule should apply.

If the damage is near the positive part or nipple of the battery you can potentally short the battery when you slide it into the mod as the metal related to the 2 poles are very close near the positive end. If there is any sign of damage on the wrap or the insulator ring do not even think of using it.

For those recoiling, keep in mind that a metal shaving or piece of wire of about a millimetre in length dropped in the wrong place can also spell disaster. Be careful no to have exposed batteries lying about when you use cutters. One in million chance you may say, but keep in mind that Murphy has always been a crafty bugger.
 
I agree with what the experts have said.

I have always double wrapped batteries that have thin original wrapping. It is so easy to do and takes about a minute per battery. The most important aspect is to remember to replace the insulator at the positive terminal if you have removed the original wrap.

If you cant find decent thick wraps then I would recommend double wrapping. I use transparent wrap over the original using a hairdryer.



I like this guy's reviews as well.
 
Thanks so much for all the info guys! These are little scratches all seem to be toward the bottom end of the battery (negative) and pretty much where the nite core holder is before you slide it down.... Which is now my guess. All our vapes we use at the moment are single battery pen style mods. I've put some electrical tape over the little gaps. Is buying new wraps a thing? And how safe is that
 
Thanks so much for all the info guys! These are little scratches all seem to be toward the bottom end of the battery (negative) and pretty much where the nite core holder is before you slide it down.... Which is now my guess. All our vapes we use at the moment are single battery pen style mods. I've put some electrical tape over the little gaps. Is buying new wraps a thing? And how safe is that

Yeah it is definitely a thing. The batteries were actually designed and wrapped to be placed in battery packs, that are housed in a plastic case laptop/drill/or most cordless/battery operated devices. They generally use a few lower amp 18650's.

It is as safe as a new wrap, maybe better, maybe worse. Depends on the wrap and if it was wrapped okay(so easy though). Not so safe if the battery itself isn't safe:-D. It is also fairly cheap, think about R6 a wrap. Just take note if the white insulator is still okay, I have had to tape one and cut out the little hole, as it was like paper.
 
Does this look in order? I'll definate ly order some and youtube a how to. Thank you!
 

Attachments

  • 15937534357265856758325922595372.jpg
    15937534357265856758325922595372.jpg
    123 KB · Views: 28
  • 15937534572415723305398415415788.jpg
    15937534572415723305398415415788.jpg
    114.3 KB · Views: 28
I wouldn't... The part that worries me is that torn edge by the positive. Like the most dangerous spot is there where the bumps are at the top.
 
Back
Top