Kanger Squonkbox?!

[n0ugh7_zw]

Here's a picture of what I'm running on the velocity.



The squonk on the hobo is practically identical to the velocity, doesn't drain all the way. But since it has a pretty deep well i haven't had any major issues. diameter of the hole in the pin is a little tight for my max vg juice. but it works pretty well.

 

[Alex]

Yowsa. And that's after how much use?

If it's a standard neck, there should be a host of bottles to substitute it with.

That's after a week of use according to the OP on reddit.


"matuscg [S] 1 point 22 minutes ago

It just started leaking, it right at the part thAt you squeeze it at. About a week of constant use."

 

[n0ugh7_zw]

Yowsa. And that's after how much use?

If it's a standard neck, there should be a host of bottles to substitute it with.

The bottles are super soft. I've trained myself to be a bit gentle when i squonk.

I've done a ton of research on different squonkers. and TBH, I really think the way kanger has done it with a solid SS tube with a T on the end and a plastic cap. works mighty well.

 

[Alex]

Here's a picture of what I'm running on the velocity.



The squonk on the hobo is practically identical to the velocity, doesn't drain all the way. But since it has a pretty deep well i haven't had any major issues. diameter of the hole in the pin is a little tight for my max vg juice. but it works pretty well.

Those are some good looking coils.

 

[n0ugh7_zw]

Those are some good looking coils.

Being unregulated, I've found dual spaced 26G is working best, reasonably low ramp, higher resistance, and good surface area.

I'm now on the hunt for more BF atties, but i'm pretty fussy.

Also really keen for Kanger to make a regulated version of this mod.

 

[Papa_Lazarou]

The bottles are super soft. I've trained myself to be a bit gentle when i squonk.

I've done a ton of research on different squonkers. and TBH, I really think the way kanger has done it with a solid SS tube with a T on the end and a plastic cap. works mighty well.

There's a chap on ECF who makes the occasional mod and swears by the rod method. I could get behind that if the cap was either fluted or "standard" sized so that a variety of bottles could be used. I generally swap out most bottles on my squonkers (eg, the Italian soft bottles as a replacement for stock reo bottles or in mods like the SVA or Lukkos).

If it causes a restriction to a bespoke bottle, then let's hope Kanger will have them available by the bushel separately.

 

[Papa_Lazarou]

Being unregulated, I've found dual spaced 26G is working best, reasonably low ramp, higher resistance, and good surface area.

I'm now on the hunt for more BF atties, but i'm pretty fussy.

Also really keen for Kanger to make a regulated version of this mod.

Nice work. Maybe try Ni80 if you want a little more ooomph (if you haven't already).

I'm thinking I'd love a version with power adjustment, too.

I'll prolly get one of these, anyway, though, just out of curiosity if nothing else.

Feel free to drop me a PM if you're looking for suggestions on some bf atties that punch in this weight class.

 

[n0ugh7_zw]

I have nickel sensitivity I've tried N80 a bunch of times, but just, not for me

But.... I reckon I'll give SS316L next time i rebuild.

For someone like you who has a bunch of the pricer mods. I think a dripbox makes a lot of sense. Cheap, cheerful and if it breaks or you lose it or whatever, not much to cry about, except your atty

Thanks a lot man, Will take you up on that before I pull the trigger on anything

 

[Papa_Lazarou]

I have nickel sensitivity I've tried N80 a bunch of times, but just, not for me

But.... I reckon I'll give SS316L next time i rebuild.

For someone like you who has a bunch of the pricer mods. I think a dripbox makes a lot of sense. Cheap, cheerful and if it breaks or you lose it or whatever, not much to cry about, except your atty

Thanks a lot man, Will take you up on that before I pull the trigger on anything

Exactly - a mod I wouldn't cry over if it got lost. Plus, there are some chaps at work who are squonk-curious but won't bite at the typical prices. I could maybe convert a couple of them with this and PIF to one of them if it took.

Yeah, I've been meaning to get some experience with SS wire. Hmmm... off to source some suppliers.

 

[n0ugh7_zw]

Exactly - a mod I wouldn't cry over if it got lost. Plus, there are some chaps at work who are squonk-curious but won't bite at the typical prices. I could maybe convert a couple of them with this and PIF to one of them if it took.

Yeah, I've been meaning to get some experience with SS wire. Hmmm... off to source some suppliers.

Thats true a nice low barrier to entry.

UD SS316L is very good stuff. should be fairly abundant over there.

 

[Silent Echo]

This is a lovely little device.

 

[Stosta]

So I got one of these about 3 weeks ago, and it still remains unopened. My wife saw it when I got home that day, and decided that it could be a birthday present for me... at the end of May!

Aside from that, anyone had any issues rebuilding the coils? Anyone dared to try put something different in there? Was considering getting a BF Velocity to put on there as I love the flavour of it, but figured I should wait to see what the stock dripper performs like.

But I hope all you bastards... I mean lovely fellow forumites... are enjoying your Dripboxes, because I'm not

 

[WARMACHINE]

Works great, and I am well impressed with the standard RDA. I have compared it to the Hastur and Velocity V2. The Velocity is marginally the best, and mainly because it feeds and drains so well, the Dipbox RDA takes longer, and I assume this is due to the consumable deck. The velocity does start to spit if you build too low. Like any 22mm dripper, there is loads of space for any type of build on all 3 of these drippers. The dripbox RDA is the most airy of the 3 due to the massive air in takes and the taller stack, I say massive compared to the velocity in particular, which has tiny in-takes.

I love it that I have been able to play around with other BF RDA's

 

[Greyz]

So I got one of these about 3 weeks ago, and it still remains unopened. My wife saw it when I got home that day, and decided that it could be a birthday present for me... at the end of May!

Aside from that, anyone had any issues rebuilding the coils? Anyone dared to try put something different in there? Was considering getting a BF Velocity to put on there as I love the flavour of it, but figured I should wait to see what the stock dripper performs like.

But I hope all you bastards... I mean lovely fellow forumites... are enjoying your Dripboxes, because I'm not

Sorry bud, maybe you should try rubbing the wife's feet. Works for me, when the wife's complaining starts, pick up a foot and start massaging.
"Why do you need another mod" gets quickly replace with soft moaning...

 

[n0ugh7_zw]

I'm running the velocity with 24G dual spaced horizontal coils. 0.18 ohms and the dripmod is firing it perfectly

 

[Greyz]

I'm running the velocity with 24G dual spaced horizontal coils. 0.18 ohms and the dripmod is firing it perfectly

Sorry I just couldn't resist
Plz don't be offended @n0ugh7_zw

Sent from my SM-G920F using Tapatalk

 

[n0ugh7_zw]

just wait till i chuck some SS316L on there. will be like 0.14

 

[Greyz]

Either your running a Sony VTC5 or an excellent Medical Aid fund

Sent from my SM-G920F using Tapatalk

 

[n0ugh7_zw]

Either your running a Sony VTC5 or an excellent Medical Aid fund

Sent from my SM-G920F using Tapatalk

VTC5 is the most cloned battery... like ever... I'm running a goblin.

 

[Greyz]

VTC5 is the most cloned battery... like ever... I'm running a goblin.

What battery are you running thats safe at such a low ohms?

Sent from my SM-G920F using Tapatalk

 

[n0ugh7_zw]

Samsung 25R, its not really super happy about it, but its a tough little b******

 

[n0ugh7_zw]

the Dripmod limits its output to 60W so it'll pull around 14A despite the build wanting more.

 

[Greyz]

Samsung 25R, its not really super happy about it, but its a tough little b******

I only use 25R in the RX and turds in the mech. But I'm too scared to build below .25 - I'm chicken shut like that

Sent from my SM-G920F using Tapatalk

 

[Greyz]

the Dripmod limits its output to 60W so it'll pull around 14A despite the build wanting more.

So even though you building low the mod is limiting the coils to only get 3.7v?

Sent from my SM-G920F using Tapatalk

 

[n0ugh7_zw]

25R's are tougher than turds, just FYI.
I've run 0.14 on a real mech off a 25R and it was fine (will obviously affect number of cycles you get outta it)
Don't think i'd do that on a turd.

The dripmod will put out whatever voltage your battery is kicking out, but with a ceiling of 60W. which will be around 14A