Kylin RTA from Vandy Vapes

FWIW I did have my coils high but then lowered them after watching the OhmBoy Josh review.
Both ways it's not leaked #FINGERSCROSSED

Sent from my LG-H870 using Tapatalk
 
Thanks for the recommendation bud.
Originally i had my coils low about 1-2 mm just above the deck now they are higher about 5mm above deck and still leaking.
That sux! Hope you can get it fixed or replaced. I know exactly how it feels when people rave about a tank but I get one that has an airlock problem or leaks
 
Got a reply from Craig at the Sirs. They will be releasing a Wicking tutorial when they back from holiday. Don't think this will solve the issue but lets see.
 
I replaced the O ring inside the tank on the deck and the glass o rings and still having the leaking.

Lets wait and see how they wick the deck but its not that complicated to wick the thing unless im using too little cotton which i think im not unless im suppose to use a whole bag of CB2.
 
I have been lucky with mine and have not had one leak with either the dual coil setup or the current single 4mm coil... but I don't get the fantastic flavour everyone else does... well not with XXX anyway.
 
To me the flavour is excellent so much so that I feel it's too intense, like the flavour sears my lungs - too over the charts
 
Really doubt it's a wicking problem, no juice is leaking from the afc ring holes, only from in between the afc ring and the base. Leaking so much I get juice on my hands every now and then, I've actually put it down and using another tank... Will wait and see what the Sirs say.

Sent from my HUAWEI VNS-L31 using Tapatalk
 
That's what I said in my response regarding the wicking. Told them to look at this thread and the pics posted. Also put mine away and back on the OBS and Ammit single.
 
That's what I said in my response regarding the wicking. Told them to look at this thread and the pics posted. Also put mine away and back on the OBS and Ammit single.
Sorry you guys are experiencing it. Put off this tank now with my luck I will also get a leaky one
 
I closed off the juice flow control, vapes a few times so the wick was dryish and a few minutes later, with the juice flow closed, it started peeing juice. got mine from Vape Club
 
Adding my 0.02

Same leaking issue.

Does it in 2ml or 6ml config, single or dual coil, coils high or low, coils squished together in the middle or pushed right out to the sides, wicked all the way from dry hit tight to gurgling loose.

It's a shame because otherwise I really like it. Subscribing to this thread to see if a solution can be found.
 
Pics showing the leakage/condensation, my concern is that it could get into the 510 connection
f64d13d1510d41502f3fe2283980233d.jpg
fa63ac9ef67b9877f881ed51b090c5b9.jpg
ce3101ae9917df94df8b3c3f46b67caf.jpg


Sent from my HUAWEI VNS-L31 using Tapatalk
 
I believe mine has it also.
but its not enough to require cleaning often.
I remove the tank once a day and clean. Seems to be worse if the tank doesnt sit flush.
I Honestly do believe Vendors should step in and re-call the affected tanks and issue replacements, There is no way all of us are wicking wrong.
 
It can't be a wicking problem from the way the pictures look and many of u guys with problems I know really know wat u doing when it comes to vaping and wicking... this ain't ur first rodeo @Clouds4Days @Deckie @ettiennedj so it's rubbish. I jus received mine so when I get home I'll try it out skeptically. I honestly believe if so many r leaking they should be taken back.
 
Guys have you look at the international sites to see if the vapers there encounter the same problem??
 
One of the reddit posts suggests that screwing 510 pin down further fixes the issue
 
Tried that already. The 510 is tight like a tiger and unable to tigten any more. Also completely removed it and reseated the peek insulator as that was another suggestion on reddit and still leaking.

Even with the 510 tightened my tank still does not sit flush.
 
I just stuff the cotton in there and that's it. I let it reach the bottom of the feed ports. Nothing to it. Haven't had one leak or dry cotton at all. You can murder this thing with wicking and it will work.......well it does for me anyways :)
 
6ffe3a56daf70fd7a12de052f15b6a72.jpg
d0b9df05c75055c83f3a0f9f748a8b83.jpg
30833b4afd009a959d1cceaf8a6dee12.jpg
4c68192db9688fe431b4018d73d9c58d.jpg


Must say this Kylin has impressed me in the past 24 hours. Awesome cloud production and flavour is amazing . Love this . Demon Killer alien wire + cotton bacon v2 = happiness.

I think my tank is either sweating at the bottom, or small leaks, but really not an issue !



Sent from my iPhone using Tapatalk
 
Back
Top