Mini Protank 3

[rampokker]

I have a Mini Protank 3 on my MVP 2, I also have an IClear 16d that I use. I found that the Protank Mini is very heayvy on juice, or maybe it's just a lot smaller than the Iclear, but I doubt that this is the case, as it is supposed to be 1.5ml and the IClear is 1.6ml.
I was just wondering is this my imagination or has anyone else experienced this.
I also found that the Protank mini will leak some juice if I don't keep it pointing up that is the one thing I love about the Iclear you can put it down just like you want without any juice leaking.
But all that being said I like the Protank a lot, it's so easy to drag and if I could sort out the leaking issue I would probably replace all my the IClears with Protanks.

 

[Necris]

@rampokker.the mpt3 is a dual coil, havent used the 16d.is it also dual?
I notice the mpt3 is heavier on juice than the pt2.
The leaking may be coil related, have u tried replacing coil.i vape almost only my 2 mpt3's with minimal leaking and gurgling

 

[rampokker]

@Necris yes the iclear is also dual coil. Will try replacing coils at some stage, I see they now have a 1.2 ohm coil that I want to try.

 

[Andre]

Should not be leaking at all. Check all you seals and washers and that the coil unit is well fastened.

 

[Al3x]

I can also agree that the pro tank does suck the juice but the flavour is one of the best I have got from a tank not including rebuild able so the juice consumption is something that we have to live with but lemme put it 3 words the mpt3 rocks

 

[Necris]

I can tell you that vs the pt2 there just is no comparison...flavour, reliability and design all better on the mpt3

 

[Limbo]

Even vs my Aerotank I stil prefer the mPT3. Flavour just seem better, but my wife has since inherited the mPT3...

 

[bjorn]

Got a mpt3 today. Using it on a vision spinner 2. So far so good. Upgraded from Twisp. The mouthpiece "rattles" when moving about. Even though the O ring on it seems to seal fine. Have any of you also experienced this?

 

[Andre]

Got a mpt3 today. Using it on a vision spinner 2. So far so good. Upgraded from Twisp. The mouthpiece "rattles" when moving about. Even though the O ring on it seems to seal fine. Have any of you also experienced this?

Yes, someone else said the same. What you could do, is take off the o-ring and wrap some dental floss in there. Replace o-ring and see if it is better.

 

[bjorn]

Ah! Thanks for the tip!

 

[Necris]

Odd.it bothered me initially but have gotten so used to it I forgot its even an issue

 

[bjorn]

True, same here. Still it does kind "take away" from it's stylishness...

 

[Necris]

It does yes, considering its sleek lines the offset does take away from its overall design.will try the dental floss tonight

 

[bjorn]

not to be funny, my vision spinner 2 is on charge now and vaping my mpt3 on a twisp battery and it's actually not bad at all. i almost want to say, it tastes a bit better than the vision?

 

[Andre]

not to be funny, my vision spinner 2 is on charge now and vaping my mpt3 on a twisp battery and it's actually not bad at all. i almost want to say, it tastes a bit better than the vision?

Not sure what power the twisp battery outputs....probably 3.7V. Set your spinner to 3.8V and the vape should be pretty much identical.
EDIT: Output could also be 4.2V....so try that on the spinner and compare.

 

[bjorn]

Judging by the taste, compared to the spinner, I would say possibly between 3.3 and 3.7. I have a multimeter but have no idea where to stick the pointy bits to measure the twisp battery.

Anyway, I'm hogging @Necris 's thread now.. :/

 

[Necris]

Lol,@bjorn, not my thread bro...I just talk a lot

 

[bjorn]

Well then it's you and me both hi jacking the thread

 

[rampokker]

It's OK guys. The name of the thread is mini protank 3 so I guess anything related to the mpt3 is good. BTW I sorted the leaking on my mpt3, I wasnt tightening everything enough. Did anyone try the 1.2 ohm dual coils on a Mvp, I tried the 1.5 ohm and the 2. I find the 1.5 is hot alot quicker than the 2 so my logic tells me the 1.2 should be even faster.

 

[bjorn]

Well in that case. Check how surprisingly spunky it looks on a Twisp battery.

 

[Necris]

Was at the eciggies.co.za PE rep today to pick up 510 connectors for my box mod and she didnt have any 1.2Ohm coils sadly, but picked up 2x 1.5's anyway.
I notice the old style mpt3 coil sucks a ton of juice into it vs the new type.tank level visibly lower after fill.
With a rebuilt pt2 single coil (32g twisted kanthal,8 wraps,1.7ohm, cotton wick)it kicks ass!
Working on wick at the moment as I am getting some gurgling on my juices as most are 70% vg+

 

[bjorn]

I should pay that lady a visit sometime to see what she has there.

 

[Necris]

Yup yup, she has diy flavours im aiming to try, strawberry shortcake and candyfloss locally available, havent tried em yet

 

[bjorn]

Schweet. I'm keen to start DYI'ing

 

[Noddy]

Has anyone used the updated dual coils on mpt3? Do you prefer the old style or new coils?

I bought a pack of the upgrade coils, but I broke my glass after only 2 days. Anxiously waiting for vape mail to arrive