Minikin v2 issue

[Rossouw]

I bought a brand new Minikin V2 at the end of last year but since yesterday something is not right. Every few hits the resistance on my TM2 starts creeping up from 0.17 to 0.2 to 0.32. The minikin then fires the build at extremely high wattage (still shows 75w on the screen). I have checked that my post screws are tight and that the 510 on my TM is tight. I also cleaned the minikin's 510. Does any one have any ideas what the problem might be?

 

[Raindance]

I bought a brand new Minikin V2 at the end of last year but since yesterday something is not right. Every few hits the resistance on my TM2 starts creeping up from 0.17 to 0.2 to 0.32. The minikin then fires the build at extremely high wattage (still shows 75w on the screen). I have checked that my post screws are tight and that the 510 on my TM is tight. I also cleaned the minikin's 510. Does any one have any ideas what the problem might be?

Hi, Are you running on TC or in power/Watt mode?

Edit: Some threads on a similar topic. Maybe something there that can help:
http://www.ecigssa.co.za/minikin-resistance-jumps.t29842/
http://www.ecigssa.co.za/miniki-v2-ohm-jumps.t33697/

 

[Rossouw]

Im running it on power mode. The coils are the fused claptons you get with the Petri RTA

 

[Rossouw]

Hi, Are you running on TC or in power/Watt mode?

Edit: Some threads on a similar topic. Maybe something there that can help:
http://www.ecigssa.co.za/minikin-resistance-jumps.t29842/
http://www.ecigssa.co.za/miniki-v2-ohm-jumps.t33697/

Thanks! I will check it out

 

[Polar]

Its most-likely a loose connection some where. Try a different atty on the Minikin to see if its in the mod or TM2 and go from there.

 

[Lee]

Had the same issue... check if the screws holding your coils are tight. That worked for me. Also check the 510 pin