You can but this is something I'll never let go of.So much want...Can I call Dibs hahaha.
NarDa RDA
- Thread starter Rob Fisher
- Start date
-
- Tags
- rda
Been a long day.... got a new atty yesterday (soul s) as well and haven't gotten round to building it yet.
Got as far as an ultrasonic this afternoon.
I see where this is going and I had mild regret pangs but then I realised you had a kayfun in your drawer for a good 3 weeks....Awesome @Christos - pressure is on
Am looking forward to hearing
What build
What power
More importantly, what juice
And most importantly, how it tasted
Back notes, middle notes and top notes !
I still have time.
I see where this is going and I had mild regret pangs but then I realised you had a kayfun in your drawer for a good 3 weeks....
I still have time.
Good comeback @Christos
But I still am keen to hear your views when you get it going
Well definately be this weekend @Silver.
Got it ultrasoniced last night and attempted a build but I wasn't happy with the coils being at 30 degrees angle to the airflow so I decided to give up and try again today.
For @Silver .
I won't get into the build too much but it's a 3 core 28 AWG aliened with 38 AWG Ni80.
0.3 ohms
3mm ID.
Very simple build and I opted to go with a angled coil as I'm tired and didn't feel like making more wire. To have the coil parallel with the airflow, I should have gone with 2.5mm ID and a simpler coil.
Wicking is pretty straight forward.
Due to the orientation of my coil I didn't go for the X wicks filling the entire bottom.
Juice selection: this is probably one of my favourite juices to date and I'm not bored of it yet!
Final picture before I comment on my experience.
Flavour is phenomenal.
It's not that it's better than any atty or does things differently. The flavour is fuller and more enhanced.
I get top, middle, and bottom notes along with all the notes in between the lines.
I have atties that I run the same juice in and some of them I get a strong lemon and others I get a more prominent merangue with the lemon as a mild after tone.
The different atties get used when I feel like the one or the other.
The narda gives it all without holding back!
This also means that a ok-ish juice may be ruined as it brings out notes that you wouldn't expect etc and certain juices taste like rubbish even though they taste good elsewhere.
I can only describe this like the first time I used a reo with a 16mm atty and a lot of my diy juices at the time that I enjoyed started tasting like dirt!
If it was more readily available I would definately get more but there is a good 2l of juice in my cuboard that needs vaping and about 3 juices would make the "wow" factor for me and the rest would be garbage. From that aspect I would like to finish off my juice purchases
If you are after flavour then this is the main prize!
This atty is a keeper and will never get sold!
That being said I understand now why people pay 10 times the cost to aquire one of these.
I won't get into the build too much but it's a 3 core 28 AWG aliened with 38 AWG Ni80.
0.3 ohms
3mm ID.
Very simple build and I opted to go with a angled coil as I'm tired and didn't feel like making more wire. To have the coil parallel with the airflow, I should have gone with 2.5mm ID and a simpler coil.
Wicking is pretty straight forward.
Due to the orientation of my coil I didn't go for the X wicks filling the entire bottom.
Juice selection: this is probably one of my favourite juices to date and I'm not bored of it yet!
Final picture before I comment on my experience.
Flavour is phenomenal.
It's not that it's better than any atty or does things differently. The flavour is fuller and more enhanced.
I get top, middle, and bottom notes along with all the notes in between the lines.
I have atties that I run the same juice in and some of them I get a strong lemon and others I get a more prominent merangue with the lemon as a mild after tone.
The different atties get used when I feel like the one or the other.
The narda gives it all without holding back!
This also means that a ok-ish juice may be ruined as it brings out notes that you wouldn't expect etc and certain juices taste like rubbish even though they taste good elsewhere.
I can only describe this like the first time I used a reo with a 16mm atty and a lot of my diy juices at the time that I enjoyed started tasting like dirt!
If it was more readily available I would definately get more but there is a good 2l of juice in my cuboard that needs vaping and about 3 juices would make the "wow" factor for me and the rest would be garbage. From that aspect I would like to finish off my juice purchases
If you are after flavour then this is the main prize!
This atty is a keeper and will never get sold!
That being said I understand now why people pay 10 times the cost to aquire one of these.
I waited a long time to get into the group.Oh my gosh @Christos
Thanks for that epic post
Very well explained
Sounds magical. Amazing!!!
Now I feel fomo again
I waited a long time for the release.
I waited up and fought the masses for the 105 units that were produced.
I waited over 20 days for sapo to do something even though I paid 62 usd for international express shipping.
All in all it was all worth it. Would definately recommend if you are interested to go forth as this was all worth it.
Unfortunately @Silver unless you are prepared to pay 1000 usd this one is one of those that needs waiting.
The atty itself is very well priced at 100 usd.
There is a reason people don't sell their NarDa's... with the proliferation of HE BF atties the NarDa is still right at the top of the pack for flavour!
I’ve waited a long time for this and all I can say it “ The hype is real!”.
Only have a simple 26g nichrome build it at the moment and the flavor is unbeatable, next some Clapton’s that I can just see the flavor getting bumped up even more.
Only have a simple 26g nichrome build it at the moment and the flavor is unbeatable, next some Clapton’s that I can just see the flavor getting bumped up even more.
I heave heard great things about the Narda @RayDeny
Congrats on that.
Am jelly
Enjoy for me...
What juice you vaping in it though?
I heave heard great things about the Narda @RayDeny
Congrats on that.
Am jelly
Enjoy for me...
What juice you vaping in it though?
Have it on my Therion 75C with some killer kustard, buttery goodness.
Giving this coil position a go, dual 26G Ni with 38G Ni wrapped 6 times around 2.5mm coming out at .22 ohms. Must say, so far the flavor is much more in your face. Must be the chamber gets reduced a lot with cotton on both sides of the screws.
I also prefer the X wicking method but lately convenience has left me with a slanted coil and only 2 channels full of wick.
Nicely done BTW. The narda is not the easiest deck to build in but it is so rewarding!
I collected the Coppervape clone version at the end of last year and did a simple coil quick build. The vape was ok, but nothing spectacular. Tonight I unpacked after our move to the new house and decided to give it another shot. Simple Ni80 coil - 0.69 ohm - 21 watt - X-wicking - airflow hitting bottom half of the coil. Amazing vape with XXX and Masked bandit. Not the easiest build with the different coil leg orientation, but worth it. Just been dripping, but can't wait to get the BF pin in and give it a run on one of my sqonkers. This is a defenite winner 
Sent by iDad's iPhone
Sent by iDad's iPhone
It is a new atty yes but the talk is that it's incrementally better so no amazing new revelations.
I'll eventually get one bit at the moment it's a waiting game so when I eventually get one I'll let you know.
Yes it’s is but hearing different stories, some say the flavor is just a little better then the NarDa and others prefer the NarDa over the NarCa. On thing they all say is it’s much easier to build on then the NarDa.
I would be interested to see the upped flavor as I can’t imagine been able to squeeze more flavor out of this little thing.
think i'll get both clones first and then decide from there which to pursue as their rarity is painful
Similar threads
