Pioneer IPV3... YAY or NAY??

[Yusuf Cape Vaper]

Thing is i'm scared i might strip those screws, as vids on rip tripper and suck my mod both complained about the poor screw build.

But yeah i get what you saying that it wont have to be charged that much.

I have the tendency to charge my mod when it reaches 30%, coz it just feels like the draw aint as potent as a fully charged mod. Maybe it's just a mental thing

Te sigelei 100w has magnets. And you could easily do a magnet door on a ipv3 or 2s. I'm getting the ipv3 next. Waiting on a vendor to bring it in. I don't feel a sag in power. The board in the device regulates power to a constant output. So Ya. Regulated for all day and mech for clouds that's my adv's

 

[Achmat89]

Te sigelei 100w has magnets. And you could easily do a magnet door on a ipv3 or 2s. I'm getting the ipv3 next. Waiting on a vendor to bring it in. I don't feel a sag in power. The board in the device regulates power to a constant output. So Ya. Regulated for all day and mech for clouds that's my adv's

Shot bru, i think i made up my mind.

I'm gonna get me one in the new year, Hopefully @Sir Vape stock them soon

 

[Achmat89]

Te sigelei 100w has magnets. And you could easily do a magnet door on a ipv3 or 2s. I'm getting the ipv3 next. Waiting on a vendor to bring it in. I don't feel a sag in power. The board in the device regulates power to a constant output. So Ya. Regulated for all day and mech for clouds that's my adv's

http://www.fasttech.com/products/3032/10011256/1968500-authentic-pioneer4you-ipv3-7-150w-variable

Probably abit risky hey?
When they say free shipping world wide, that means it has to go through SAPO???

 

[Riaz]

http://www.fasttech.com/products/3032/10011256/1968500-authentic-pioneer4you-ipv3-7-150w-variable

Probably abit risky hey?
When they say free shipping world wide, that means it has to go through SAPO???

Yes that is correct.




Sent from my iPhone using Tapatalk

 

[Andre]

Te sigelei 100w has magnets. And you could easily do a magnet door on a ipv3 or 2s. I'm getting the ipv3 next. Waiting on a vendor to bring it in. I don't feel a sag in power. The board in the device regulates power to a constant output. So Ya. Regulated for all day and mech for clouds that's my adv's

I have been following this thread with interest. Love the enthusiasm for high power vaping. Am sorely tempted to give it a go.
Why is a mech better for clouds @Yusuf Cape Vaper? Or is it just your personal preference?

 

[Achmat89]

Yes that is correct.




Sent from my iPhone using Tapatalk

Well that's a snag!!

 

[Dr Phil]

Still love my Ipv v2 she puts out lol never used it past 38w

 

[VandaL]

LOL you making my heart burn here.

Such a sleek sexy mod in my opinion lol
I like the memory option it has instead of scrolling high and low for wattage preferences

My heart burns every time I hold it, Contemplated stealing it a few times I ordered mine with EMS shipping back in mid october, Last update was it was scanned in JHB and nothing has happened since, called DURMAIL twice, said the scan just means they scanned the bag it's in an have not gotten to it yet

 

[Yusuf Cape Vaper]

I have been following this thread with interest. Love the enthusiasm for high power vaping. Am sorely tempted to give it a go.
Why is a mech better for clouds @Yusuf Cape Vaper? Or is it just your personal preference?

I find that if I build a "surface area coil" on my sigelei, then it raises the resistance considerably. So a good build with 22g wire is gonna give me like 0.5ohms. Push the wattage up to 100w, which pushes the voltage up quite high too. That's when it gets real hot. Too hot to handle lol. I've Vaped at 8.4 volts before which is an unregulated series box at full battery. With a mech I build shit low (I do not recommend anyone doing this) and I get a cooler Vape with much more clouds than my 100w can give me. I've Vaped down to 0.07ohms before and it was cooler (not cool) than 100w on a 0.5ohm coil.

 

[Andre]

I find that if I build a "surface area coil" on my sigelei, then it raises the resistance considerably. So a good build with 22g wire is gonna give me like 0.5ohms. Push the wattage up to 100w, which pushes the voltage up quite high too. That's when it gets real hot. Too hot to handle lol. I've Vaped at 8.4 volts before which is an unregulated series box at full battery. With a mech I build shit low (I do not recommend anyone doing this) and I get a cooler Vape with much more clouds than my 100w can give me. I've Vaped down to 0.07ohms before and it was cooler (not cool) than 100w on a 0.5ohm coil.

Ah, thanks I get it.

 

[Marzuq]

Question is: Will you ever actually use 150w? Nothing wrong with the IPV2 or IPV2s.

I dont see the point, but thats just my 2c

I agree with @Oliver Barry .
The only question you need to ask and answer is, will I ever vape at 150watt?

 

[Yusuf Cape Vaper]

I agree with @Oliver Barry .
The only question you need to ask and answer is, will I ever vape at 150watt?

@Marzuq you know my answer lol

 

[free3dom]

Haha, I love it! For some of us the question is "Will you ever vape at 150W?" and for others it's "Will 150W be enough?"

Such a varied bunch of people...variety is the spice of life...and vapers

 

[Yusuf Cape Vaper]

I am part of the latter

 

[Marzuq]

@Marzuq you know my answer lol

As i typed that out I was thinking in the back of my head only @Yusuf Cape Vaper will answer Yes to that lol

 

[ESH]

I'm loving the v2 and never go above 30 w, so its a nay for me, me thinks that the mini will probably be my next mod.
Different strokes for different folks.

 

[kev mac]

I get what you are saying, its just there were more things that put me off with the IPV2.

Mainly that i watched a few reviews and they all seem to complain about the touch fire button and that the IPV2 feels like it was cheaply made and not solid. Im scared it will fall and burst open as they complain about the back cover does not sit flush

I use an ivpmini v2 and I think it's a cool little mod, built well enough and for the 50 bucks I paid I can't *****.

 

[kev mac]

V

Ipv 3 is awesome. I've been waiting months for sapo to deliver mine. It is easy to vape at 165w u have to have the coils setup right. Large surface area and lower Guage wire work great. I have my onslaught setup with a tricoil tiger wire, pics can be found in my tiger wire thread on general forum. Used it on my mates v3, can easily be vaped at 165w so much flavour and clouds bro cuz clouds

Vaped my god mod 180s @ 220f w/a hell boy just to experience it and it was intense to say the least. Now I'm down to earth@35.... nice!