Plume Veil Flavour

Mufasa

Mufasa

Experienced Vaper
LV
7
 
Joined
19/5/14
Posts
174
Awards
10
Age
51
Location
Cape Town
Happy Friday Everybody

I recently got a Plume Veil dripper. I need some advice. I built a 1.6 Ohm single coil, 28G kanthal, 8 wraps on 2mm ID. I am vaping on an iStick 50W at 16-18 Watt. I get lots of clouds, but very little flavour. What am I doing wrong?
 
Last edited:
Morning @Mufasa
You could try a dual coil and a lower ohm build.
This is what im currently using in my plumeveil. Dual coil, 24G kanthal, 9 wraps each on a 4mm drillbit 0.3 ohm build.
Great flavour and vapour best build i've had in the plumeveil thus far.
:rock:
 
I'm running dual 24g 7wrap 2mm ID in my PlumeVeil with the airflow wide open.
And the flavour is amazing.

I have found that coils with a bigger inner diameter ( ID ) give slightly less flavour.
 
r0gue z0mbie said:
Really. Is that with any atty in general, or specifically PlumVeil?
Click to expand...
I only have PlumeVeil drippers and have tried many coil combos and found the 1,8mm to 2,2mm ID to give the best flavor at around 0,4 to 0,3Ohms.
I can't comment on the ID effect in other attys.
 
at 1.6ohm that is very high. Try doing 1ohm and basically increasing the vape heat, can help with flavour
 
personally Ill vape at about .3 .4 air holes right open, dual coil on a 3mm id with 24g, i have great flavour from that. vape at about 30-40 watts (less if you must) and enjoy.
 
The guy is regulated so the builds aren't as important.

That said, run dual coil and play with the air flow.
 
Jakey said:
Not quite sure what u mean by this
Click to expand...

Debating gauges and wrap count / ohms doesn't matter much when regulated. In fact, recommending 24ga is a bad thing in my experience
 
So u saying that popping any build on there will work you just need to choose the correct wattage?
 
No, I'm saying that going from 8 wraps of 28ga to 7 wraps of 24ga at 16 watts will be worse than what he's currently getting and that considering he's running regulated, the first and biggest improvement he can make is running dual coils at double the wattage while sticking to 28ga due to the increased heat flux compared to a higher guage wire.
 
I
Mike said:
No, I'm saying that going from 8 wraps of 28ga to 7 wraps of 24ga at 16 watts will be worse than what he's currently getting and that considering he's running regulated, the first and biggest improvement he can make is running dual coils at double the wattage while sticking to 28ga due to the increased heat flux compared to a higher guage wire.
Click to expand...
your first comment wasnt wasn't as clear as tge point you just made now
 
Mufasa said:
Happy Friday Everybody

I recently got a Plume Veil dripper. I need some advice. I built a 1.6 Ohm single coil, 28G kanthal, 8 wraps on 2mm ID. I am vaping on an iStick 50W at 16-18 Watt. I get lots of clouds, but very little flavour. What am I doing wrong?
Click to expand...

Yeah mate, put two of those coils in and it will be at about .8ohms. Run at about 20-30 watts and you'll have very improved flavor.
 
Thanks for all the replies. I am now running a dual coil at 0.4 Ohms and 25 to 30 Watts. Huge improvement.
 
You must log in or register to reply here.

Similar threads

ace_d_house_cat
I saw, I wanted, I bought in and I failed...
Replies
16
Views
4K
Paul33
Paul33
Quintusson
Univapo UA25 Sub-ohm tank review (wow flavour, but..)
Replies
5
Views
973
Quintusson
Quintusson
fbb1964
Will FDA harm health, destroy businesses, and protect the cigarette industry through regulatory over
Replies
0
Views
668
fbb1964
fbb1964
Timwis
Innokin Sensis Next-Gen 40W Pod Mod - Review
Replies
5
Views
1K
fbb1964
fbb1964
Timwis
Hellvape Vertex MTL RTA - Review
Replies
12
Views
2K
DarthBranMuffin
DarthBranMuffin
Back
Top