Pulse AIO Kit - Vandyvape

[SmokeyJoe]

So i found out why im getting condensation.
There was a fine hair line crack next to the 510, but crack runs straight through to body.
I thought i perhaps dropped it or manhandled the pulse, but going back to my photos i took on the day i received it, i could see the crack.
So i took a chance and contacted VandyVape directly and to my surprise they immediately sent me a replacement body for the part thats cracked.
Unfortunately its via China Post, so im going to wait for a loooooong time.

But still, didnt expect such awesome service from VandyVape.

I cant vault them on the mod, it could have been dropped during original transit from China to Vendor

 

[Chris du Toit]

For those still looking to get one Juicy Joe's has them at an awesome price!

https://www.juicyjoes.co.za/shop/hardware/kits-mod-tank/vany-vape-pulse-aio-kit-a-tony-b-project/

 

[Speedy_11]

For those still looking to get one Juicy Joe's has them at an awesome price!

https://www.juicyjoes.co.za/shop/hardware/kits-mod-tank/vany-vape-pulse-aio-kit-a-tony-b-project/

oh no i wanted a black one and my frosted clear one is being delivered today .is what it is

 

[Spunk3yMunk3y]

The fomo this forum gives me is too real...
Thanks guys! haha

 

[Grand Guru]

 

[Spunk3yMunk3y]

Imagine having an Itch you cant scratch... unless you won an itch scratcher thru the lotto

 

[Speedy_11]

Imagine having an Itch you cant scratch... unless you won an itch scratcher thru the lotto

so my pulse finally arrived and when I opened it is a dam laptop battery,on the call now with courier guy to get the driver to bring back my package

 

[SmokeyJoe]

so my pulse finally arrived and when I opened it is a dam laptop battery,on the call now with courier guy to get the driver to bring back my package

Are you serious?

 

[Dela Rey Steyn]

I feel your pain bud, ordered from Yuppiechef on Tuesday (gift for SWAMBO) it was sent via Aramex. Went from CPT to JHB, then to Polokwane (100km from us), and then for some or other unknown reason, back to Sandton?!?!? Still haven't arrived. Hopefully next week, FML...

 

[Speedy_11]

I feel your pain bud, ordered from Yuppiechef on Tuesday (gift for SWAMBO) it was sent via Aramex. Went from CPT to JHB, then to Polokwane (100km from us), and then for some or other unknown reason, back to Sandton?!?!? Still haven't arrived. Hopefully next week, FML...

they came back

 

[Paul33]

they came back View attachment 249266

And was it worth the wait?

 

[SmokeyJoe]

they came back View attachment 249266

For the mouth piece. Remember to prime it with liquid, then twist it on, not push down

 

[Grand Guru]

Goddammit I hate you guys... but I'm bloody super excited to build it

 

[DavyH]

Goddammit I hate you guys... but I'm bloody super excited to build it

View attachment 249552

You’re wasting time taking pictures and commenting when you could be building….

 

[Dela Rey Steyn]

Goddammit I hate you guys... but I'm bloody super excited to build it

View attachment 249552

Now your hunt for a Pioneer insider begins! Good luck and may the odds be ever in your favour!

 

[Adephi]

Goddammit I hate you guys... but I'm bloody super excited to build it

View attachment 249552

That 21700 battery should last forever in MTL mode

 

[Grand Guru]

First thing. Hunt for the perfect drip matchy matchy driptip to replace that hideous white piece of Teflon!

 

[AdriaanH]

 

[Timwis]

View attachment 249618

The Stormtrooper look!

 

[veecee]

View attachment 249618

Oh wow. That is just awesome! Except for the drip tip, I don't like the stock tip.

But those doors are so lekka. Where did you get them?

 

[AdriaanH]

It's the only white I had on hand. Don't use it.
3D printed.

 

[GadgetFreak]

It's the only white I had on hand. Don't use it.
3D printed.

Amazing it took me awhile to notice the fine layers lines. Excellent print!!!

 

[Chris du Toit]

I followed in @adriaanh footsteps and had a search on Thingiverse and found a legend had uploaded his STL files for the panels, a few minutes customizing them and off to the printer.

They came out quite nice, just need to slap on my glass bed to get a better finish on the front facing side.

 

[AdriaanH]

Looks awesome

 

[Paul33]

I followed in @adriaanh footsteps and had a search on Thingiverse and found a legend had uploaded his STL files for the panels, a few minutes customizing them and off to the printer.

They came out quite nice, just need to slap on my glass bed to get a better finish on the front facing side.

View attachment 249690
View attachment 249691

Those are super cool!!

You should do pulse V2 panels because those are IMPOSSIBLE to find. Good few customers would be knocking on your door I’m sure!