Pulse Squonk with Dead Rabbit

[SergioChasingClouds]

Hi all,

Need some advice regarding my first squonk Mod.
Using a Samsung 25R battery.
Currently have it running a single coil (Flatwire, NI80, ID3mm, 8 wraps)
About .3ohms

Do you guys have any suggestions on a good dual coil build using the same battery?
What wire and gauge should I use? I'd like to keep the ID at 3mm as I feel this is the only size I can wick perfectly...

 

[87hunter]

Following with interest.

My Athena has nichrome 80 24ga parallel with 5 wraps. Sitting at 0.23ohms on my alien. I use a vtc5a or 25r and dpro.

Was so so, so I put it on my voopoo and it's amazing.
Looking for a better build

 

[Daniel]

No matter who tells you what , dual coils will eat any battery for breakfast ..... but if you MUST dual 6 wrap 3mm ID Haywire Flatwire 24g or 26g

Also on a mechanical mod even more so .... just be ceareful not to build any lower as the 25R only has a 25A Continuous Discharge ...

just my 2 chappies worth ....

FYI for some building tips : https://www.ecigssa.co.za/dead-rabbit-rda-long-term-review.t41456/