rba rebuild
- Thread starter theoS
- Start date
Give some more info bud.
What atty?
Inner diameter of your coil?
How many wraps?
What gauge wire and type of wire?
What type of wicking material?
What mod are you using and if regulated, what wattage at?
You can't expect help if you don't give info.
What atty?
Inner diameter of your coil?
How many wraps?
What gauge wire and type of wire?
What type of wicking material?
What mod are you using and if regulated, what wattage at?
You can't expect help if you don't give info.
And a picture or two will also help a lot.
Last edited:
Agreed. I pic of your current build so we can see if there's a problem.
Mate, you said you rebuilt your coil and the the draw was too tight. That means that you have all the answers to my questions above. If you don't give me those answers, then I can't give you advice. I need to know what you did and what you used to determine where the problem lies. Just answer the questions above and we can go from there.
The diameter of the coil and the thickness of wire is essential in vaping and it also determines your resistance of the coils. That way you control the power output from the battery to the coil.
I need those answers if I am to try and help you.
Check this out
http://www.steam-engine.org/#main
Sections
Click the links on top to navigate between the sections:
- The Ohm's law calculator is a simple Ohm's law calculator with Joule heating.
- The coil wrapping calculator is specialized for winding coils for rebuildable atomizers (RBA).
- The battery drain calculator shows you the current and power drain on the battery in your e-cigarette.
- The mod range calculator tells you the optimal resistance range for your regulated mod.
- The DIY e-liquid calculator lets you select nic strength and VG/PG ratio for the nicotine base liquid and your desired outcome.
- The Wire Wizard gives you the ability to mix different wires to customize your coil – and your temperature curve.
i dont know what i did i use the standard rba coild in the subbox mine put my wick in and that was it so what wire it is and stuff i dont know
i think the only thing i understood there was the e-liquid one
may have been too much cotton and the airflow was closed to much as the rbs itself does not restrict the airflow can you upload us a pic dont be shy it will only help you enjoy the device more
Seems to me you need the basics. Google is your friend. Do a search on "basic coil building". Lots of results, i.e.:
https://godofsteam.wordpress.com/2013/12/05/getting-started-building-your-first-coil/
https://www.e-cigarette-forum.com/forum/threads/basic-coil-building-and-safety-for-beginners.661383/
Hi @theoS
This post i wrote a while back might give you some of the answers to your questions about the different coil variables
http://www.ecigssa.co.za/coils.t11571/#post-224199
Also, this one may be worth a read
http://www.ecigssa.co.za/talk-to-me-about-building-coils.t12467/#post-236333
@theoS just check out some basic coil building (type in coil building 101) videos on YouTube, you know Rip Trippers or Grimm Green etc. and they'll set you straight.Good luck.
- Joined
- 7/8/14
- Posts
- 861
- Awards
- 24
- Age
- 38
Do you want to be helped bro? You keep on shooting questions but dont stop to read the answers. 2.4% is 24mg/ml thus 24mg/ml plus equal amount of 0mg equals 12mg/ml
I do whane behelpd i just need to buy new wire redo my build take pics and then post it
- Joined
- 7/8/14
- Posts
- 861
- Awards
- 24
- Age
- 38
Then I misunderstood the situation. Reading through all your replies and the replies of the others you whant to figure out what size of wire and the amount of cotton you need right? If so i can tell you what I always did in my subtank rba.
@theoS, I think the problem is that you have received many answers above, but have not acknowledged most of them - either by posting a response or by using one of the icon buttons, like the "thanks" one. And rating someone's post with a "dislike" is not going to help getting you help. Simply a matter of forum courtesy imho.
- Joined
- 7/8/14
- Posts
- 861
- Awards
- 24
- Age
- 38
Thats what I meant. Not trying to be a a$$.
What i did is used the standerd coils that comes in the subtank mini but i had a tight draw
I
Its cool i understand im just new to forums and dont really know all the stuff .and seen that i am trying to cut smoke well more like give up .i need to find out evry thing and try every thing i can and get what suits me the best . So its not like i dont appreciate the help or ne thing its just that im still trying to get a lod of the hole forum thing
@theoS
Slow down there mate. I think the big problem is you trying to do too many different things at once with no to very little experience. You need to crawl before you can walk.
Google and Youtube are your friends. Watch some videos and on how to do what it is you trying to do as I still have no clue what that is from reading your problems...
My point is, don't try jump into too many things with no knowledge of what you doing. You can harm yourself whether it be by mis-using your equipment, or Nicotene.
Slow down there mate. I think the big problem is you trying to do too many different things at once with no to very little experience. You need to crawl before you can walk.
Google and Youtube are your friends. Watch some videos and on how to do what it is you trying to do as I still have no clue what that is from reading your problems...
My point is, don't try jump into too many things with no knowledge of what you doing. You can harm yourself whether it be by mis-using your equipment, or Nicotene.
Also, please check what you type before posting. That last post of your doesn't make sense at all. Not everybody can read mxit language. Type slower and make sure your post make sense before posting it. I want to help but everytime I read your posts I get confused as to what you mean and then just close the thread.
Similar threads
