Reo Mail
- Thread starter Rob Fisher
- Start date
None better for me than the OL16.
Great build for me on the Cyclone is 28g Kantral micro coil 2mm ID , 5-6 wraps comes in just under 1.0ohm , very lakker for methol vapes.
Make sure to try and get the coil as close to the deck as possible , if TH too much just raise it a bit or open both air holes .....
P.S Welcome to Reoville , everyhting else will pale in comparison .....
Dengit , wish SlowTech would hurry up already ......
I agree. Been waiting a while for a few OL16 clones. They have left customs but that does not mean much.
I am glad though that I have an original now as well
I have been waiting a while for this day and finally it is here.
From dad to dad xmas present(s)
View attachment 75906
Welcome to Reoville
Amazing gear to start off with, everything in that pic is geared to success, top shelve vaping if you ask me.
....well except that red door
arlghhhh super ugly door, you should sell it to me, i'll get rid of it for you 
Stunning. I have the exact same in Mini.
Thanks Andre. Cannot wait to get home an set her up.
My pleasure. I hope you enjoy her !
Gives me joy to see her in use as she has been sitting unused.
That is one amazing piece of kit brother.
That is definetly one piece i would like to own one day.
First i need to save for my Luna Sea (hopefully i can have one for christmas)
Then next would love a Woodville Reo.
Stunning! Congrats.
That is one of the most beautiful Woodvils of all time... one day I'm going to panel the walls of my home office and have a desk made out of that exact wood! Congrats @GregF! Take good care of her!
allwaysThat is one of the most beautiful Woodvils of all time... one day I'm going to panel the walls of my home office and have a desk made out of that exact wood! Congrats @GregF! Take good care of her!
Look what got delivered to my place during the day.
Ordered last Tuesday, shipped on the Wednesday and in my paws a week later.
Ordered last Tuesday, shipped on the Wednesday and in my paws a week later.
She is a beauty. Congrats and enjoy.Look what got delivered to my place during the day.
Ordered last Tuesday, shipped on the Wednesday and in my paws a week later.
Received P67 #5 today that I had Robert make up special for me (commentary below).
Ever wonder why the metal Reos now days are only offered in specific colors/finishes? In a nutshell because they are the colors/finishes that Robert thru much experimentation has suffered the fewest losses with. IOW, it's a crap shoot when something new is tried, whether it will be acceptable or not, whether it will be a color/finish that will have issues that prevent it from being acceptable as close to 100% of the time as possible. The time and expense to make mods only to have some of them ruined in the finishing process can greatly reduce company profit margins. Even those that might be able to be saved require extra work and materials that also reduces profits. For example, I recently posted on this forum that Robert will no longer offer any anodized Reos. There are always losses with them, and it's especially bad with some colors that historically other mod makers have also had many issues with. I treasure all of my anodized Reos I was lucky to get while they were still being made.
I wanted another 1-2 P67's. But, I already have way too many Reos in the everyday colors/finishes. So this time I took the risk for a change instead of Robert. I bought the custom color supplies and hoped for the best. I chose several colors to consider, discussed them with Robert and most were already known to him as less than stellar choices. So I did more research, and found 2 that I was pretty confident would work on the raw aluminum and also be acceptable colors to me.
Robert worked his magic on this one and it came out way better than expected. I love all my Reo P67's and use them everyday/night, but this unique one, my oh my, is easily #1 of all my Reos. Besides the 5 of my Nuppin's that match it, 3 newer BF RDA's that match it are also proving to be among my favorite Reo atty's as well. So cam see up to 7-8 DIY's getting vaped on this P67.
Ever wonder why the metal Reos now days are only offered in specific colors/finishes? In a nutshell because they are the colors/finishes that Robert thru much experimentation has suffered the fewest losses with. IOW, it's a crap shoot when something new is tried, whether it will be acceptable or not, whether it will be a color/finish that will have issues that prevent it from being acceptable as close to 100% of the time as possible. The time and expense to make mods only to have some of them ruined in the finishing process can greatly reduce company profit margins. Even those that might be able to be saved require extra work and materials that also reduces profits. For example, I recently posted on this forum that Robert will no longer offer any anodized Reos. There are always losses with them, and it's especially bad with some colors that historically other mod makers have also had many issues with. I treasure all of my anodized Reos I was lucky to get while they were still being made.
I wanted another 1-2 P67's. But, I already have way too many Reos in the everyday colors/finishes. So this time I took the risk for a change instead of Robert. I bought the custom color supplies and hoped for the best. I chose several colors to consider, discussed them with Robert and most were already known to him as less than stellar choices. So I did more research, and found 2 that I was pretty confident would work on the raw aluminum and also be acceptable colors to me.
Robert worked his magic on this one and it came out way better than expected. I love all my Reo P67's and use them everyday/night, but this unique one, my oh my, is easily #1 of all my Reos. Besides the 5 of my Nuppin's that match it, 3 newer BF RDA's that match it are also proving to be among my favorite Reo atty's as well. So cam see up to 7-8 DIY's getting vaped on this P67.
Received P67 #5 today that I had Robert make up special for me (commentary below).
View attachment 97087
Ever wonder why the metal Reos now days are only offered in specific colors/finishes? In a nutshell because they are the colors/finishes that Robert thru much experimentation has suffered the fewest losses with. IOW, it's a crap shoot when something new is tried, whether it will be acceptable or not, whether it will be a color/finish that will have issues that prevent it from being acceptable as close to 100% of the time as possible. The time and expense to make mods only to have some of them ruined in the finishing process can greatly reduce company profit margins. Even those that might be able to be saved require extra work and materials that also reduces profits. For example, I recently posted on this forum that Robert will no longer offer any anodized Reos. There are always losses with them, and it's especially bad with some colors that historically other mod makers have also had many issues with. I treasure all of my anodized Reos I was lucky to get while they were still being made.
I wanted another 1-2 P67's. But, I already have way too many Reos in the everyday colors/finishes. So this time I took the risk for a change instead of Robert. I bought the custom color supplies and hoped for the best. I chose several colors to consider, discussed them with Robert and most were already known to him as less than stellar choices. So I did more research, and found 2 that I was pretty confident would work on the raw aluminum and also be acceptable colors to me.
Robert worked his magic on this one and it came out way better than expected. I love all my Reo P67's and use them everyday/night, but this unique one, my oh my, is easily #1 of all my Reos. Besides the 5 of my Nuppin's that match it, 3 newer BF RDA's that match it are also proving to be among my favorite Reo atty's as well. So cam see up to 7-8 DIY's getting vaped on this P67.
That color is amazing man... That's not just a vaping device but a work of art
It's not gold. Unfortunately the old Canon 10MP PS camera with just its flash hand held doesn't do a great job on my mod pictures, and I don't have anyplace to set up my better cameras/tripods/lights, etc.
This Reo is the OG Copper Metallic P67. It's color and highlights change in changing light angles, and it has a light sandpaper texture that feels nice in hand. If there is enough of the supplies left over from the P67, I am thinking of having a LP/SL Mini 2.1 done the same color.
Similar threads
