Sapor RDA

Rebel

Dedicated Vaper
LV
19
 
Joined
11/8/14
Posts
509
Awards
19
Location
Centurion
Hello


I would like opinions on the Sapor RDA.
What wick and wire do you use with it, is it durable etc.
Also can it be used with a kangertech subox mini?

All opinions will be appreciated as I am interested in buying this product.

Thanks
 
Great flavour, big clouds.
Regular Kanthal will work, though getting experimental can really get a lot more out. (Wisted, Clapton etc.)
And it will indeed work on your device baring in mind you can only go down to 0.3Ohms I believe?
and 50w of power? (Correct me if wrong though)

0.3Ohms with 40-50watts will be good....but obviously this is at the limits of your device.
Not saying you can't, but more power and lower Ohms is where a lot of the drippers really start to shine and blow you away!:)
So you can easily get the Sapor and start experimenting keeping your limitations in mind,
but ultimately you may need to look for a stronger device sometime in the future :confused:
But believe you me, the tech is developing by leaps and bounds!! :p

And I'm sure you'll get more advice shortly! :D
 
Hi @Rebel

I got the Sapor a few months back after I read all of @Andre 's raving about it.
It is a great RDA just because it does not leak :)

I use dual claptons 32/26, wicked Scottish roll style and the flavour and clouds are amazing.
It is so good that a friend comes weekly to use it to test new juices, and is not looking to get one for himself, as compared to my Freakshow and Mutation X4 (should be called Leaktation :)

It is a very durable RDA. Been using it daily now (evenings only) for the last 2 months and is still works with no issues.
 
Hello


I would like opinions on the Sapor RDA.
What wick and wire do you use with it, is it durable etc.
Also can it be used with a kangertech subox mini?

All opinions will be appreciated as I am interested in buying this product.

Thanks
yes it can be used with the subox mini i use 25Ga kanthal (vapowire ) and organic cotton love this rda to bits
 

Attachments

  • drip.jpg
    drip.jpg
    131.5 KB · Views: 36
Thanks to all for the input.
I will be placing my order today
 
I received my Sapor from Sirvape this morning (my first RDA) did a dual twisted 26g kanthel build 5 wraps 2mm ID came to 0.2 ohms on my iStick 50w and this thing is awesome. Wow!!!
Next up id like to increase the ID so I can do the Scottish roll method.



Sent from my iPhone using Tapatalk
 
had my sapor for a month and loving it. The trick to get the full potential from it is build as close to the outer walls and air ducts as possible.

my favourite build so far has been parallel 28g 6/7 2.4mm wraps.

I'm running it on a parallel dual 18650 mech mod around .2/.3 ohms so that's between 55-80w for the regulated guys.
 
had my sapor for a month and loving it. The trick to get the full potential from it is build as close to the outer walls and air ducts as possible.

my favourite build so far has been parallel 28g 6/7 2.4mm wraps.

I'm running it on a parallel dual 18650 mech mod around .2/.3 ohms so that's between 55-80w for the regulated guys.

That's amazing, really great that you are enjoying it :)
 
Got mine also today and by 10 o clock tomorrow morning it will be a bottom feed atty :)
Can't wait to try it out on my VR Woodmod :)
 
Great to hear all the good feedback on the Sapor
All the detailed posts are appreciated
 
The grub screws strip very easily, just like a clone.
Mine is authentic. Bought from Sir Vape.
Very nice atty and very good flavor, but sub standard grub screws imo.
 
Last edited:
The grub screws strip very easily, just like a clone.
Mine is authentic. Bought from Sir Vape.
Very nice atty and very good flavor, but sub standard grub screws imo.
I agree with you on that stripped 2 last night where on earth can we get replacements screws and ideas
 
You can use sandpaper on the end of the screws to try and make it even and smooth.
 
Already confirmed. lol hehe. Will wait till next week. I'll probably have more money for a new mod then as well.
 
▒█▀▀▀█ ░▀░ █▀▀█   ▒█░░▒█ █▀▀█ █▀▀█ █▀▀
░▀▀▀▄▄ ▀█▀ █▄▄▀   ░▒█▒█░ █▄▄█ █░░█ █▀▀
▒█▄▄▄█ ▀▀▀ ▀░▀▀   ░░▀▄▀░ ▀░░▀ █▀▀▀ ▀▀▀ is the best :rock:
 
I agree with you on that stripped 2 last night where on earth can we get replacements screws and ideas

I make my own grub screws. I take a normal screw that fits. Cut off the head. Cut to correct length and then cut a groove across for a flat head screw driver. They never strip.
 
you don't have to use grub screw do you? the RDA is deep enough.
 
Back
Top