Screw driver styled Allen key

[MurderDoll]

The Allen Key that the tornado uses is 1mm in size I think as I compared it against a 1.5mm which seems far too big.

Anyway. I'm looking for the Allen key that's mounted onto a handle like a screw driver. Anyone have such an item or know where I can get one?

Smallest builders warehouse has is 1.5mm.

Sent from my LG-H850 using Tapatalk

 

[wiesbang]

China town. I bought a kit that has a bunch of different fittings. Lemme see if i find a pic

 

[Alexander Scott]

The Allen Key that the tornado uses is 1mm in size I think as I compared it against a 1.5mm which seems far too big.

Anyway. I'm looking for the Allen key that's mounted onto a handle like a screw driver. Anyone have such an item or know where I can get one?

Smallest builders warehouse has is 1.5mm.

Sent from my LG-H850 using Tapatalk

I was also looking everywhere for something like that, I eventually got this set from Makro, the 1.3mm works on my serpent mini, and have used the 1.5mm on my mad hatter v2 rda, there is a little bit of a play on the mad hatter, but works.

Sent from my iPhone using Tapatalk

 

[wiesbang]

China town. I bought a kit that has a bunch of different fittings. Lemme see if i find a pic

Looks like this one
$9.22 JAKEMY JM-8117 37-in-1 Disassembling Multi-Bit Screwdrivers Set - JM-8117, 37-in-1 (free shipping) - FastTech.com

https://fs.tc/p/2144400

 

[MurderDoll]

Thanks @Alexander Scott
That's exactly the one I was looking for.
Ill take a drive to Makro and have a look.

Thanks as well @wiesbang
If I don't have any joy at makro ill hit China town and see if I can find that.

Sent from my LG-H850 using Tapatalk

 

[Pixstar]

https://blckvapour.co.za/collections/accesories/products/screwdriver-set-31-piece

 

[Viper_SA]

http://m.fasttech.com/products/1560903

This takes care of all my needs

 

[zadiac]

Looks like this one
$9.22 JAKEMY JM-8117 37-in-1 Disassembling Multi-Bit Screwdrivers Set - JM-8117, 37-in-1 (free shipping) - FastTech.com

https://fs.tc/p/2144400

Don't buy that one! I have one and the female hex insert in the handle strips and becomes useless. This is a very low quality tool.

 

[wiesbang]

Don't buy that one! I have one and the female hex insert in the handle strips and becomes useless. This is a very low quality tool.

The one i have still works perfectly. Not the same make but looks similar to that. I will try and find it and post a pic. Its in my garage....somewhere

 

[MurderDoll]

Picked up one of the Mastercraft kits like @Alexander Scott has.

Thanks for the tip. I wouldn't have thought of going to makro.
Now I don't need to use those stupid small Allen keys anymore.

Sent from my LG-H850 using Tapatalk

 

[Alexander Scott]

@MurderDoll, cool bud, hope they work well for you as they do for me, let me know bud!


Sent from my iPhone using Tapatalk

 

[MurderDoll]

@MurderDoll, cool bud, hope they work well for you as they do for me, let me know bud!


Sent from my iPhone using Tapatalk

Thanks bud. Will do.

Sent from my LG-H850 using Tapatalk

 

[Silver]

Picked up one of the Mastercraft kits like @Alexander Scott has.

Thanks for the tip. I wouldn't have thought of going to makro.
Now I don't need to use those stupid small Allen keys anymore.

Sent from my LG-H850 using Tapatalk

Were they small enough @MurderDoll ?

 

[MurderDoll]

Were they small enough @MurderDoll ?

Haven't had a chance to test them yet. Will do a pit stop today and report back.


But when I did buy them yesterday, I measured the Allen key that the tornado uses with a vernier and it came in at 1.3mm. So it should work perfectly.

 

[Christos]

Were they small enough @MurderDoll ?

I have 3 sets from makro, one being the mastercraft shown above.
They work for the reo and a velocity etc but are too big for a nuppin and a cyclone.
I assume that's why you are asking

 

[Silver]

I have 3 sets from makro, one being the mastercraft shown above.
They work for the reo and a velocity etc but are too big for a nuppin and a cyclone.
I assume that's why you are asking

Not really @Christos - was just curious
I have a allen key screwdriver Rob imported for us on one of the group buys a while back so that one is working fine. Just wanted to know if i ever needed one for something else

 

[MurderDoll]

Not really @Christos - was just curious
I have a allen key screwdriver Rob imported for us on one of the group buys a while back so that one is working fine. Just wanted to know if i ever needed one for something else

Did a quick rebuild on the velocity mini yesterday.

It also uses the 1.3mm hex and the hex driver worked brilliantly. I would highly recommend the Mastercraft kit if you have a lot of Allen key head screws. It makes the building process so much easier.