Show us your builds - Drippers (RDAs)

[Gazzacpt]

Haven't posted here in a while.

Simple 24g 5/6 wrap 2.4mm ID dual coming in at 0.24 on a CLT wicked with Japanese organic cotton.

 

[Andre]

Haven't posted here in a while.

Simple 24g 5/6 wrap 2.4mm ID dual coming in at 0.24 on a CLT wicked with Japanese organic cotton.

Perfect coiling as always. How do you find the Japanese cotton compared to "normal" cotton?

 

[Gazzacpt]

Perfect coiling as always. How do you find the Japanese cotton compared to "normal" cotton?

Thank you sir I had good teachers.
I havent given Japanese cotton a fair shake yet, first impression is not bad, it doesn't really have much of that initial "cotton" taste. After 2 toots flavour come straight through. Still have to use it for a few days and see how it holds up.

 

[Zegee]

Been a while but haven't had anything weird or wonderful until new toys arrived

Hobo v2
26g dual coil
3mm id

Vapes like a champ

 

[Zegee]

Another one for fun

Dark horse rda
Dual para 26g
7-8 wraps
3mm id

 

[Gazzacpt]

Trusty old TOBH

Dual 24g 2.5mm id

 

[Yusuf Cape Vaper]

Just a little 22g vapowire duel coil for my stillare today. Also, I haven't been posting here for a while. So here it goes

ID- 2.4mm
Wick- rayon
Wire- 22g vapowire
Wraps- 6 p/coil
Resistance- 0.16
Battery- vtc4/5

I lost my third screw of my stillare so I put all the legs through the one negative and positive.

Vapor production is on another level
TH is obviously great
Flavor is pretty good too.

 

[Yusuf Cape Vaper]

My first tri-coil build in the Onslaught rda. I like it. I'm half asleep so I didn't even check the ohms. 24g 7wraps p/coil around a 2.4mm. Wicked with a single piece of rayon. Anyone have better wicking techniques for a tri-coil setup like this please let me know. It's my first time

 

[Necris]

Very happily refurbed my trident with bits of another from @kimbo.
Amazing how much easier it is to build with all 3 post screws/caps
28g,8 wraps,2m I.D,0.7oHms

 

[Gazzacpt]

My first tri-coil build in the Onslaught rda. I like it. I'm half asleep so I didn't even check the ohms. 24g 7wraps p/coil around a 2.4mm. Wicked with a single piece of rayon. Anyone have better wicking techniques for a tri-coil setup like this please let me know. It's my first time

Coils look great. You can get away with a lot less wick then you get better airflow around the coils. Also tilting the coils like you did makes magic with flavour and clouds.
I didn't take pics of the build I did in the onslaught but its very similar to that. Used 26g and it came in at just over 0.2 ohms vaped like a dream.

 

[Zegee]

Plume veil
26 g dual coil
7-8 wraps
Should be .5️

 

[n0ugh7_zw]

Haven't posted in a while

Here's what I just built in my magma



1 strand of 24g + 2 strands of 32g twisted

7 wraps around a 2mm screwdriver. Works out to 0.52 ohms


Sent from my iPhone using Tapatalk

 

[free3dom]

Haven't posted in a while

Here's what I just built in my magma

View attachment 18275

1 strand of 24g + 2 strands of 32g twisted

7 wraps around a 2mm screwdriver. Works out to 0.52 ohms


Sent from my iPhone using Tapatalk

Stunning coil, and pictures! Nicely done

 

[n0ugh7_zw]

thanks @free3dom i got this little clip on macro lens for my phone, really works well with taking close up coil pics.

 

[free3dom]

thanks @free3dom i got this little clip on macro lens for my phone, really works well with taking close up coil pics.

That is amazing, I would not have pegged that as taken with a phone camera - really awesome shots

I need a decent macro lens too. After having not needed one in a long time, coil pics has really made me look at getting one again

 

[n0ugh7_zw]

Here we go again I couldn't sleep so I made this for my hobo clone.

I rolled a 24g micro coil, then I dremelled its outter edges flat. It's 6 wraps around a 1.5mm screw driver works out to 0.50 ohms on the nose. Crazy fast ramp up time.




Sent from my iPhone using Tapatalk

 

[Silver]

Your photos are outstanding @n0ugh7_zw !

 

[free3dom]

Absolutely stunning once again @n0ugh7_zw!

Macro shots really make the coils "pop" - of course it helps that your coils are beautiful to begin with

 

[n0ugh7_zw]

Hobo again

Twisted 26awg, ground and wrapped 6 times around a 1.7mm screw driver 0.66 ohms


Sent from my iPhone using Tapatalk

 

[free3dom]

Awesome @n0ugh7_zw!!

It looks like snake scales close up...and in the last image it looks like it's squeezing the life out of a lemon

Also the higher contrast really makes the coils stand out beautfully!

 

[n0ugh7_zw]

Plumeveil this time.

Single strands of 24, 26 & 28g, twisted and ground

6 wraps, which comes out at 0.32 ohms


Here's a close up of the wire.



Sent from my iPhone using Tapatalk

 

[Yusuf Cape Vaper]

View attachment 18372

Plumeveil this time.

Single strands of 24, 26 & 28g, twisted and ground

6 wraps, which comes out at 0.32 ohms


Here's a close up of the wire.

View attachment 18373

Sent from my iPhone using Tapatalk

Awesome coils dude. What do you use to flatten the wire?

 

[n0ugh7_zw]

Thanks man, I dremel the wire after i've rolled the coil. Flattening it would leave me with the same mass of metal on the coil. Grinding it losses me some mass, which gives way better ramp up times. whilest keeping the surface area in contact with the cotton nice and big.

 

[kimbo]

Morning @n0ugh7_zw

WoW those coils look very good, you should make a how to video to show us how a coil master creates his art

 

[n0ugh7_zw]

Morning @kimbo, thats a plan I'll have a go at that later today