Show Us Your Reo Pics!!

[Andre]

i want her to be dry dry before i handle her

Lol, tempted but no response.
Btw, what did you use to get the old paint/covering off?

 

[PeterHarris]

Yea I knew that line was a possible set up...

Anyway. I used this, just spray it on leave for 5 to 6 min and the paint just bubbles of. Then use a scraper to scrape off in 1 direction. Then if there is still some paint left just repeat.

Dont get it on your seals or rubber bits. It will eat that away.

Sent from my GT-I9500 using Tapatalk

 

[vaalboy]

Looking good @PeterHarris Not sure how you coping not vaping on a Reo - must be torture?

 

[PeterHarris]

Looking good @PeterHarris Not sure how you coping not vaping on a Reo - must be torture?

yea its taking some serious will power lol

 

[Alex]

I saw a thread on ECF where one of the guys used melted wax in the 510 connection to seal her off.

http://www.e-cigarette-forum.com/forum/reos-mods/486631-reo-paint-project.html

 

[PeterHarris]

i just used some presstick

 

[mbera]

So she arrived to day



The welcoming committee




Sent from my GT-I9300 using Tapatalk

 

[shabbar]

Congrats !!!

Enjoy her

 

[RIEFY]

nice one bera!

Sent from my GT-I9500 using Tapatalk HD

 

[Rob Fisher]

 

[Silver]

Great @mbera !

And how does the welcoming committee view the new entrant to the Mbera household?

Let us know how she performs

 

[PeterHarris]

Allow me to present Catherine in her new shiney outfit....

Sent from my GT-I9500 using Tapatalk

 

[RIEFY]

looking goood hope her panties are all dried up now

Sent from my GT-I9500 using Tapatalk HD

 

[Rob Fisher]

She is look real good Peter!

 

[RIEFY]

omg rob look here

Sent from my GT-I9500 using Tapatalk HD

 

[Rob Fisher]

I have seen them CVS... and I am taking strain because they are not mine!

 

[PeterHarris]

Ok so F this stupid super retarded paint. Again after letting it dry for 72hours, once I hild onto her the paint heats up and becomes sticky. But this time cause I only did 1 thin coat the paint comes off. So I will be rocking the raw tumbled look on Catherine with a sprayed door.

Sent from my GT-I9500 using Tapatalk

 

[johan]

FYI; all alumina surfaces require an alumina primer before you can paint with something that will last.

 

[MurderDoll]

May I ask what rattlecan you are using specifically? Like Sprayola, etc?

 

[PeterHarris]

FYI; all alumina surfaces require an alumina primer before you can paint with something that will last.

thanks Ohm @johan

i was using rust-o-leum - its R150 a can and it says paint and primer in one for use on Wood / metal / plastic / macenory

so i asusmed it would work - but im not hanging my reo from the fan for another 3 days - i want to vape it... and this look is quite nice...

just a side note, if i one day do deside to polish her and spray a coat of propy wat se goed, will that clear coat last?

 

[PeterHarris]

May I ask what rattlecan you are using specifically? Like Sprayola, etc?

this one...

 

[Silver]

@PeterHarris , sorry to hear about all your troubles
I admire your persistence and determination.
Maybe @Cape vaping supplies can give you some tips. I recall him painting his REOs several times?

 

[johan]

thanks Ohm @johan

i was using rust-o-leum - its R150 a can and it says paint and primer in one for use on Wood / metal / plastic / macenory

so i asusmed it would work - but im not hanging my reo from the fan for another 3 days - i want to vape it... and this look is quite nice...

just a side note, if i one day do deside to polish her and spray a coat of propy wat se goed, will that clear coat last?

Yes the clear poly-urethane will last, proviso the surface is uber clean (clean with isopropyl / rubbing alcohol)

 

[PeterHarris]

@PeterHarris , sorry to hear about all your troubles
I admire your persistence and determination.
Maybe @Cape vaping supplies can give you some tips. I recall him painting his REOs several times?

thanks - but im gona wait before i spray again - i really mis vaping on Catherine too much...

 

[devdev]