Smok RPM40 pods

[Snape of Vape]

Anyone here have any specific trick/tip to open that feed flap to get the juice in?
It's close to impossible for me on the RPM coil, to the point where I've actually torn of a bit of that flap thing trying to open it, which now makes it even more difficult!

Yes I've tried tweezers, the tweezers tore that piece off of it.

Also, leaking on the non RPM pod, anyone any ideas?

I bought his device last week, so far I have mixed emotions towards it.

 

[KALSTER]

I got the RPM 80 pro on Saturday, but it also comes with a RMP 40 pod. For me I just jam a nail into the front and lift. No troubles at all.

 

[Snape of Vape]

I got the RPM 80 pro on Saturday, but it also comes with a RMP 40 pod. For me I just jam a nail into the front and lift. No troubles at all.

Maybe mine's just a bad batch then. Now with the bit that has broken off, I have to remove the entire plug (remove the back part where it attaches to the pod as that's easiest to take out), fill it and then replace all of it.
I'll probably need to get a replacement pod but don't really want to do this and pay shipping only for 1 item.

 

[Silo]

I got the RPM 80 pro on Saturday, but it also comes with a RMP 40 pod. For me I just jam a nail into the front and lift. No troubles at all.

They are actually different. Wanted to get a spare pod for the RPM80 from Vapeking, they only have RPM40 pods.

 

[takes]

They are actually different. Wanted to get a spare pod for the RPM80 from Vapeking, they only have RPM40 pods.

Hi Silo, check Vaperite for RPM80 pods

 

[Silo]

Hi Silo, check Vaperite for RPM80 pods

Thank you. Unfortunately their CBD must buy puts me off.

 

[Timwis]

I got the RPM 80 pro on Saturday, but it also comes with a RMP 40 pod. For me I just jam a nail into the front and lift. No troubles at all.

It comes with a pod that takes RPM coils but it's not the same pod entirely different shape.

 

[Timwis]

Maybe mine's just a bad batch then. Now with the bit that has broken off, I have to remove the entire plug (remove the back part where it attaches to the pod as that's easiest to take out), fill it and then replace all of it.
I'll probably need to get a replacement pod but don't really want to do this and pay shipping only for 1 item.

I'm afraid it is a hell of a good seal and takes some patience at first lifting the bung out without ripping it but after a few openings i have found mine has loosened slightly, still a good seal but no longer any great drama opening it anymore, it's not ideal. Out of those early pod mods i find the RPM40 better than the Vinci mainly because of the lack of leaking from the RPM pod compared to the Vinci but yeah the Nord pod lets it down as that does leak much more like the Vinci but luckily for me i prefer the RPM coils compared to the Nord.

 

[RenaldoRheeder]

Anyone here have any specific trick/tip to open that feed flap to get the juice in?
It's close to impossible for me on the RPM coil, to the point where I've actually torn of a bit of that flap thing trying to open it, which now makes it even more difficult!

Yes I've tried tweezers, the tweezers tore that piece off of it.

Also, leaking on the non RPM pod, anyone any ideas?

I bought his device last week, so far I have mixed emotions towards it.

I had the same issue with the Nord RPM POD. Rather than pull, try to push it back with your nail to open.

My thoughts are that Smok should include that little plug as a spare in the kit.

It is now standard procedure for me to order spare pods when ever I order a pod system.


Sent from my iPhone using Tapatalk

 

[Snape of Vape]

I had the same issue with the Nord RPM POD. Rather than pull, try to push it back with your nail to open.

My thoughts are that Smok should include that little plug as a spare in the kit.

It is now standard procedure for me to order spare pods when ever I order a pod system.


Sent from my iPhone using Tapatalk

Thanks man, I'll try that then next time.
I figured if I ordered a bunch of coils, I'd be ok, so didn't get any pods with this being my first pod device really.
Trying to find a vendor then that has the replacement RPM pod, RBA base and 510 adapter, seeing as I have to probably pay full shipping again in any case.

 

[Silo]

Thanks man, I'll try that then next time.
I figured if I ordered a bunch of coils, I'd be ok, so didn't get any pods with this being my first pod device really.
Trying to find a vendor then that has the replacement RPM pod, RBA base and 510 adapter, seeing as I have to probably pay full shipping again in any case.

VapeKing have those, bought some stuff and saw them.
https://www.vapeking.co.za/reewape-ruok-rba-coil.html
https://www.vapeking.co.za/smok-rpm-standard-pod-3-pack.html
https://www.vapeking.co.za/vxv-510-adapter-for-smok-rpm40-kit-1pc.html

Not sure how good the adapter or RBA is. Just thought would mention it.

 

[Snape of Vape]

VapeKing have those, bought some stuff and saw them.
https://www.vapeking.co.za/reewape-ruok-rba-coil.html
https://www.vapeking.co.za/smok-rpm-standard-pod-3-pack.html
https://www.vapeking.co.za/vxv-510-adapter-for-smok-rpm40-kit-1pc.html

Not sure how good the adapter or RBA is. Just thought would mention it.

Thanks for the links!
Do you know if there's any difference between the RPM and the normal Nord pod? If not I can just put a RPM coil in the Nord pod?

 

[Silo]

I think the ones I linked are the standard, for the RPM coils. The Nord pod I think is just for the Nord coils.

I speculate here, and assume that they would do it like that. I could be wrong.

Though if you want the Nord coil ones.
https://www.vapeking.co.za/smok-rpm-nord-cartridge-4.5ml-3-pack.html?rid

 

[Snape of Vape]

I think the ones I linked are the standard, for the RPM coils. The Nord pod I think is just for the Nord coils.

I speculate here, and assume that they would do it like that. I could be wrong.

Though if you want the Nord coil ones.
https://www.vapeking.co.za/smok-rpm-nord-cartridge-4.5ml-3-pack.html?rid

No I do want the RPM ones, but I have the extra Nord cartridge, so I can just try and put the RPM pod in there I and see if that works.

 

[AdriaanH]

https://www.vapeking.co.za/reewape-ruok-rba-coil.html

This is for the NORD POD and won't fit in the RPM pod.

The Nord coils only fit in the Nord pod, the black one.
And the RPM coils only fit in the RPM pod red one.

This is the RBA for the RPM pod.
https://www.vapecartel.co.za/products/rpm-rba?_pos=1&_sid=8db922cd3&_ss=r

 

[Silo]

https://www.vapeking.co.za/reewape-ruok-rba-coil.html

This is for the NORD POD and won't fit in the RPM pod.

The Nord coils only fit in the Nord pod, the black one.
And the RPM coils only fit in the RPM pod red one.

This is the RBA for the RPM pod.
https://www.vapecartel.co.za/products/rpm-rba?_pos=1&_sid=8db922cd3&_ss=r

Yeah their description said both pods, sorry about that @Snape of Vape

 

[Timwis]

Thanks for the links!
Do you know if there's any difference between the RPM and the normal Nord pod? If not I can just put a RPM coil in the Nord pod?

Coils are different sizes mate, hense different pods.

 

[Lightbringer]

Maybe mine's just a bad batch then. Now with the bit that has broken off, I have to remove the entire plug (remove the back part where it attaches to the pod as that's easiest to take out), fill it and then replace all of it.
I'll probably need to get a replacement pod but don't really want to do this and pay shipping only for 1 item.

Looking at getting a RPM 80 Pro, but most pod systems have replacement pods you can buy. But I don't see anywhere in SA that sells them. I'm a cults ... so dropping will be inevitable. I'm picturing the drip tip breaking off etc. So I'm wondering if you know of where one can buy these?

 

[Jean claude Vaaldamme]

Looking at getting a RPM 80 Pro, but most pod systems have replacement pods you can buy. But I don't see anywhere in SA that sells them. I'm a cults ... so dropping will be inevitable. I'm picturing the drip tip breaking off etc. So I'm wondering if you know of where one can buy these?

Get the Vinci X. Sirvape sell them, extra pods, coils, rba 510 adapter etc

 

[RenaldoRheeder]

Anyone here have any specific trick/tip to open that feed flap to get the juice in?
It's close to impossible for me on the RPM coil, to the point where I've actually torn of a bit of that flap thing trying to open it, which now makes it even more difficult!

Yes I've tried tweezers, the tweezers tore that piece off of it.

Also, leaking on the non RPM pod, anyone any ideas?

I bought his device last week, so far I have mixed emotions towards it.

Push it out by inserting your nail under the flap rather than pulling on it


Sent from my iPhone using Tapatalk