Smok v8 stick with big baby beast helppppp

Nightwalker

Staying off cigs
LV
31
 
Joined
16/12/15
Posts
1,360
Awards
21
Location
Over here
Guys help.
M1 and m2 coils are nowhere to be found ATM.
What light baby beast or big baby beast coil can I use on the v8 stick kit?
Desperate now.
The 0.6 coil is like sucking a golf ball through a hosepipe
 
Im in the same boat bro.

The problem with the RBA Base is that its so difficult accomplishing the right resistance for the 3.7V battery. It runs so beautifully with the M2 (0.15ohm).

Would love to know what build to put in the RBA for the same performance. Subscribed
 
Make it easy use 26ga kanthal @ 2.8mm 5 wraps. I think that should do well
 
I use either 24G Ni80 2.5mm ID about 7-8 wraps or 26 G SS316L also 2.5mm ID with 7-8 wraps. I think any wire less than 26G should do the trick though. 2.5 mm ID max to allow airflow. Don't over wick and make sure ur wick is clear of the airflow inlet at the bottom

Sent from my SM-T815 using Tapatalk
 
I have 24g SS. So I'll give it a go. If not. I'll go wire shopping in am
 
If you want lower ohms you can even try a fused Clapton or something like that. I have used Deamon Killer Alien wire 0.3 0.8+32GA which worked quite nicely. I think 5 wraps at 2.5 ID came in at 0.18 ish ohms if memory serves me correctly. Awesome clouds.
 
If you want lower ohms you can even try a fused Clapton or something like that. I have used Deamon Killer Alien wire 0.3 0.8+32GA which worked quite nicely. I think 5 wraps at 2.5 ID came in at 0.18 ish ohms if memory serves me correctly. Awesome clouds.
On a v8 stick?
 
Ok feed back time.
Ok success with the rba section coil for my stick. But needed extended glass as u know. I just used what was in the coil rba standard. It's some kind of Clapton. But it works.
 
I'm to lazy ATM to try other builds.
Anyone know what wire is in the baby beast rba coil? That will answer so many questions
 
Right. Dual 7 wrap 24g 316L in the baby beast rba in the smok v8 stick kit with the big baby beast using 9mg NIC and 80/20 juice... The stick went strong for four hours then started going down. But solid vaping. No other devices inbetween
 
Right. Dual 7 wrap 24g 316L in the baby beast rba in the smok v8 stick kit with the big baby beast using 9mg NIC and 80/20 juice... The stick went strong for four hours then started going down. But solid vaping. No other devices inbetween
80/20 mix does tend to fowl up the coils a little especially if the juice is a dessert, bakery type at higher watts. I tend to re-wick quite often (every second day or even every day depending on juice and heat) in order to avoid too much gunk build up. Thats with 70/30 mix so 80/20 would have to be done more often.
9mg NIC at higher watts will knock my socks off though.
 
80/20 mix does tend to fowl up the coils a little especially if the juice is a dessert, bakery type at higher watts. I tend to re-wick quite often (every second day or even every day depending on juice and heat) in order to avoid too much gunk build up. Thats with 70/30 mix so 80/20 would have to be done more often.
9mg NIC at higher watts will knock my socks off though.
9mg is my wake the hell up juice. So i can exercise
 
80/20 mix does tend to fowl up the coils a little especially if the juice is a dessert, bakery type at higher watts. I tend to re-wick quite often (every second day or even every day depending on juice and heat) in order to avoid too much gunk build up. Thats with 70/30 mix so 80/20 would have to be done more often.
9mg NIC at higher watts will knock my socks off though.
Think I misunderstood ... did you mean 9 hrs battery life on the stick? Thats pretty decent.
 
Back
Top