No problem to take off the air screw completely. I do the same
Squape [R]s and Kayfun v4 (Lemaga Clones)
- Thread starter Lehan
- Start date
I did look for a o ring that might fit, unfortunately I only have smaller and bigger sizes. I did wick the coil quite well, more wick than what I normally use with the subtank, I put the chimney on and pressed the wick down to reach the 4 small holes at the bottom of the deck....
Sent from my D5803 using Tapatalk
Sent from my D5803 using Tapatalk
My guess is you're probably done the same thing I did the first time I put it back together and not getting a proper seal on the juice control and the gurgling you're hearing is because you're a bit flooded. I wouldn't worry about it too much as long as you're not getting juice in your mouth. The tank will eventually form a proper vacuum and the gurgling will stop.
If you want to fix it properly:
1 - empty the juice from it and then take the bottom piece with the wick off the tank (if we're working with the exploded part diagram thats parts 1 to 25 off parts 26 to 41).
2 - Then without the screw and base attached (parts 1 to 3) screw the part that 3 attaches to out as far as it can go (I think its part 17 you can grab hold of). I used a pair of stump nose pliers for this but you want to be careful to only make it finger tight.
3 - Now take part 3 and screw it onto the the hollowed bolt which protrudes from the base (I think its part 9) until its finger tight.
4 - You should now have enough play to get about 4 whole turns on the screw and he'll get a bit tighter.
Sorry i'm finding this quite hard to explain. The short version is that you need to make sure part 3 is screwed onto part 9 properly. As andro said you should actually be able to use it without the screw. I'd caution against turning the screw (part 1) to much without it grabbing as I suspect it'll strip quite easily.
If you want to fix it properly:
1 - empty the juice from it and then take the bottom piece with the wick off the tank (if we're working with the exploded part diagram thats parts 1 to 25 off parts 26 to 41).
2 - Then without the screw and base attached (parts 1 to 3) screw the part that 3 attaches to out as far as it can go (I think its part 17 you can grab hold of). I used a pair of stump nose pliers for this but you want to be careful to only make it finger tight.
3 - Now take part 3 and screw it onto the the hollowed bolt which protrudes from the base (I think its part 9) until its finger tight.
4 - You should now have enough play to get about 4 whole turns on the screw and he'll get a bit tighter.
Sorry i'm finding this quite hard to explain. The short version is that you need to make sure part 3 is screwed onto part 9 properly. As andro said you should actually be able to use it without the screw. I'd caution against turning the screw (part 1) to much without it grabbing as I suspect it'll strip quite easily.
when u wick it cut it longer than u would and press it into the base with the 4 holes
Whoo hoo, okay it's sorted. Phew. What a hassle lol. Thanks so much @David Fereira and @andro. Flooding sorted, blew all the access juice through the air intake and wiped it off. Bottom screw (part one is sorted out).
Tight drag, allot like sucking on an stinky, very nice flavour.
Workes wonders now.
Thanks again with all the help....
Sent from my D5803 using Tapatalk
Tight drag, allot like sucking on an stinky, very nice flavour.
Workes wonders now.
Thanks again with all the help....
Sent from my D5803 using Tapatalk
She looks good. Hopefully worth the effort. 
Vapes like a machine....
Must say, I'm really enjoying it now.... It produces a whole different taste to the juice I'm currently running. Had it in my subtank and doesn't bring that crispness...
Sent from my D5803 using Tapatalk
Must say, I'm really enjoying it now.... It produces a whole different taste to the juice I'm currently running. Had it in my subtank and doesn't bring that crispness...
Sent from my D5803 using Tapatalk
for me kay4 is the best for taste ever
What's your setup like on the kayfun? Resistance and voltage wise? Currently running mine at 1.2ohm and 14W.
Last edited:
Sounds good
Got my Squape, ended up receiving a blue one but it doesnt matter as i will just use the silver tank. Will give it a test tonight after i manage to clean it with some vodka.
Its looks quite nice and seems like it will be a breeze to build, but yes those refill slots look a bit slim.
Its looks quite nice and seems like it will be a breeze to build, but yes those refill slots look a bit slim.
I swopped my red tank with the silver one last night, didn't clean either of them as they smelled and looked fine, just make sure the glass insert on the tank is pushed back to the side of your drip tip. On filling the silver tank, the juice didn't run through, manged to push the glass down a little and off it went.
I don't hassle to fill it at all, I make use of a needle bottle without any hassles.
Sent from my D5803 using Tapatalk
I don't hassle to fill it at all, I make use of a needle bottle without any hassles.
Sent from my D5803 using Tapatalk
Got the Squape up and running.
Stupidly easy to build on, easiest i have ever built. Really good flavour and great mouth to lung draw.
I havent noticed any leaking so far.
Filling is really annoying though, the gap is so small so firstly you have to refill very slowly but it also seems to always form a bubble where the juice does not go into the tank and you have to somehow try and pierce that bubble.
So apart from the filling issues its quite a nice tank and an absolute steal at R150
Stupidly easy to build on, easiest i have ever built. Really good flavour and great mouth to lung draw.
I havent noticed any leaking so far.
Filling is really annoying though, the gap is so small so firstly you have to refill very slowly but it also seems to always form a bubble where the juice does not go into the tank and you have to somehow try and pierce that bubble.
So apart from the filling issues its quite a nice tank and an absolute steal at R150
Hi @Hackers
Glad you are enjoying your new toy...
Vape away
Sent from my Sony Z3 using Tapatalk
Similar threads
