Sorry a bout the typos.my digitiser does that since it was replaced
Sent from my VF-696 using Tapatalk
52 gauge??!!! Wow, okay. I'll give him a shout, for a last attempt...but so far Ni80 still the favourite. Looking into the Demon Killer range also now
Before this I used flat nichrome.had problems till I figured out how to coil it.slightly too long or too short and your day is spoiled. And hits different on different mods.
Sent from my VF-696 using Tapatalk
Its
It's incredibly interesting to me that the same wire can give different results on different devices.
you should get some Kidney puncher Nichrome wire and a daedalus coil maker and make your own multi-core claptons.
I take 3 strands of 26g N80 and clapton them and then i flatten them with a pasta roller. after about 5 passes through the roller its perfectly flat and there is no reason you could take even smaller gauges and use even more strands and flatten them.
i havent touch a single spool of premade clapton since i got my coil maker. even simple fused claptons flattened are great.
I take 3 strands of 26g N80 and clapton them and then i flatten them with a pasta roller. after about 5 passes through the roller its perfectly flat and there is no reason you could take even smaller gauges and use even more strands and flatten them.
i havent touch a single spool of premade clapton since i got my coil maker. even simple fused claptons flattened are great.
@Jono90 I have just started with coil building and trying different wires every month...so it's going to take some time to get to Expert level 9000 hehehe.
But thanks for the idea man
@Jono90 I have just started with coil building and trying different wires every month...so it's going to take some time to get to Expert level 9000 hehehe.
But thanks for the idea man
Busy looking at it....hehehe
Busy looking at it....hehehe
Just to correct you there bro, the vent holes on a tube and all the air coming through in a squonkers battery slot can't stop a vent, those holes are there to release pressure incase a battery vents so it doesn't turn into an explosion but rather a purge of pressure
Hi @Steyn777
I cant advise you on the wire but i can advise you to get an ohm reader
It is vital if you are making your own coils
So many times the actual coil comes out at a different ohm reading to what the steam engine calculator has suggested. This is from my experience. As the guys say it also helps to check if there is a short, i.e. if the coil is touching somewhere it shouldnt. It takes a minute to check and helps so much with safety.
I cant advise you on the wire but i can advise you to get an ohm reader
It is vital if you are making your own coils
So many times the actual coil comes out at a different ohm reading to what the steam engine calculator has suggested. This is from my experience. As the guys say it also helps to check if there is a short, i.e. if the coil is touching somewhere it shouldnt. It takes a minute to check and helps so much with safety.
@Silver that will definitely be part of my next order...spent the last 2 nights trying to fix my vaporreso mod, actual still busy with it currently...so I can get a better idea as to what this wire can offer, because my experience so far has been nothing short than a kick in the face with a golf shoe.
Haven't used it in months, squonk adn DR took over everything...but SS in my opinion does not belong on a Kangertech Mini. HeheheSorry to hear
Hope you get it sorted
It would appear, that after 2 days of non stop effort, I got the Vaporesso to work...but wont know until done with build and wick.
Nope, finally got the mod to power up, but as soon as I install the griffin it says check atomizer, so I'll use the magma again but on the vaporesso.Yeah!!!
Sent by iDad's iPhone
Ps...you can place any sized ss coils as close to the middle as possible and the Griffin still won't close.
@Steyn777 hey bro,I'm a bit late on this and maybe slow on the uptake but are you talking about using ribbon wire to wind (Clapton) around round wire?
I beg to differ,but i never give up in trying and neither should you pall
Sent from my VF-696 using Tapatalk
I solved my problem by experimenting with small -medium coils and big coils and then figured out the wire first before coiling.otherwise take a coil length of wire before coiling and check the resistance
Sent from my VF-696 using Tapatalk
Sent from my VF-696 using Tapatalk
Oh no man, that's the spool I bought already clapton
ReRemember the subox mini can't vape any lower than 0.3, worked brilliantly on the Vaporesso. Ramp up time is equal to none...only still get that metallic taste.
Mine don't register below 0.1
If you talking about this
Sent from my Venue 7 HSPA+ using Tapatalk
Similar threads
