I will definitely put it on my things to do list, better flavor is what im about vape wise
I'm exactly the same, so when I read about anything that produces better flavour I have to build it...or try
So I had some Beeds 3d printed from @KZOR designs...the guys totally messed it up, the entry holes are way to small to fit even 29g wire. I've read that there is a lego method to keeping core wires straight and after 2 days of searching I can't find anything on them. Anyone know about this method and are willing to share some info? @Greyz @Friep
Basically you take two LEGO blocks and stick them together with the core wire running trough this however is not working for me but I think I have clone LEGO blocks...
What works well is keyrings especially the better quality one's they are kind of flat...
Keyring pictures courtesy of @Moey_Ismail
This one:
I didn't have access to a 3D printer so I purchased the beads from @KZOR. They did need to be broken in 1st before they slide over the cores smoothly.
I just used a piece of wire to break them all in.
Sent from my SM-G570F using Tapatalk
I like the hairpin and key ring inside the chuck idea. I use a paperclip. That just looks so much better. Thanks for the responses everyone.
to give you an idea about the different sizes I received....the 1 on the far right can handle 28g and thats the biggest 1. Will find another company and try again though, this stuff works.
Post some pics man. Always keen to see the work of fellow builders
I posted, don't know what went wrong with upload.
Here goes.1st one twisted tri- core
Second is just an experiment two twisted in an advken rta for educational purposes
and third bi-twisted core spaced
Sent from my X30 using Tapatalk
Here goes.1st one twisted tri- core
Second is just an experiment two twisted in an advken rta for educational purposes
and third bi-twisted core spaced
Sent from my X30 using Tapatalk
That 1st one looks very much like a cat track. How is the Vape?I posted, don't know what went wrong with upload.
Here goes.1st one twisted tri- core
Second is just an experiment two twisted in an advken rta for educational purposes
and third bi-twisted core spaced
Sent from my X30 using Tapatalk
Vape was good. I swopped it out already.drained my cells quick but will do it again and every time i get an urge to build a coil...i get the urge to try it.
Sent from my X30 using Tapatalk
Sent from my X30 using Tapatalk
I am exactly the same.
Another twisted core and wrap staggered ss.
Sent from my X30 using Tapatalk
Sent from my X30 using Tapatalk
Al wat ek nodig het om te hoor.
So you take 2 twisted cores and then stagger wrap them? You don't fuse them after the wrap?
inspired by @Resistance 29g 3 strands twisted, staggered wrapped and fused.3.5mm 0.24ohms. Flavour is on point, but staggered fused with normal wire still better.
View attachment 134664 inspired by @Resistance 29g 3 strands twisted, staggered wrapped and fused.
3.5mm 0.24ohms. Flavour is on point, but staggered fused with normal wire still better.
3.5mm 0.24ohms. Flavour is on point, but staggered fused with normal wire still better.
Looks pretty good. Have you tried Framed staples? Those coils work great in single coil RDAs.
Well done.
I get .2 ohms on a 5 wrap and if i don't then i just shorten the coil to less wraps
Sent from my X30 using Tapatalk
I get .2 ohms on a 5 wrap and if i don't then i just shorten the coil to less wraps
Sent from my X30 using Tapatalk
Not easy to wrap these buggers...lol
Kangertek mini doen’t fire anything lower than .3 ohms, try higher! It’ll work!! 0.5 hit the sweet spot for me at 28W.
Similar threads
