Stainless steel wire

Zebelial

Noobsaibot
LV
23
 
Joined
15/9/16
Posts
115
Awards
15
Location
Pretoria, Gauteng, South Africa
Hi guys.

Does anybody know of a place I can get SS Clapton or SS fused Clapton or at least the correct wire configuration to make my own. I'm currently on a kanthal Clapton and it is horrible compared to my normal ss24g spaced coils.

Thanks in advance



Sent from my SM-G900H using Tapatalk
 
Hi guys.

Does anybody know of a place I can get SS Clapton or SS fused Clapton or at least the correct wire configuration to make my own. I'm currently on a kanthal Clapton and it is horrible compared to my normal ss24g spaced coils.

Thanks in advance



Sent from my SM-G900H using Tapatalk
Fasttech.com

Sent from my SM-N9005 using Tapatalk
The MKWS Brand that is most commonly available for SS Clapton wire on Fasttech is very cheap and decent. However, you will need considerable patience (most likely one to two months) for it to arrive via normal free shipping. If you would like faster, local options:
http://www.sirvape.co.za/collections/accessories/products/316l-clapton-wire-5m
http://www.vapecartel.co.za/collect...26awg-fused-30awg-wire-3m?variant=21553497539
http://www.vapecartel.co.za/collect...ss316-26awg-30awg-wire-3m?variant=25540771459
http://www.vapecartel.co.za/collect...28awg-fused-30awg-wire-3m?variant=21553371459

If I may make a suggestion for the next time you are looking for a specific product - when you post in the "Who has stock" forum, the vendors themselves can directly reply to your query, whereas here they may not.
 
The MKWS Brand that is most commonly available for SS Clapton wire on Fasttech is very cheap and decent. However, you will need considerable patience (most likely one to two months) for it to arrive via normal free shipping. If you would like faster, local options:
http://www.sirvape.co.za/collections/accessories/products/316l-clapton-wire-5m
http://www.vapecartel.co.za/collect...26awg-fused-30awg-wire-3m?variant=21553497539
http://www.vapecartel.co.za/collect...ss316-26awg-30awg-wire-3m?variant=25540771459
http://www.vapecartel.co.za/collect...28awg-fused-30awg-wire-3m?variant=21553371459

If I may make a suggestion for the next time you are looking for a specific product - when you post in the "Who has stock" forum, the vendors themselves can directly reply to your query, whereas here they may not.
Thank you for the reply. I will do so in the future. Thank you for the links, much appreciated.

Sent from my SM-G900H using Tapatalk
 
The MKWS Brand that is most commonly available for SS Clapton wire on Fasttech is very cheap and decent. However, you will need considerable patience (most likely one to two months) for it to arrive via normal free shipping. If you would like faster, local options:
http://www.sirvape.co.za/collections/accessories/products/316l-clapton-wire-5m
http://www.vapecartel.co.za/collect...26awg-fused-30awg-wire-3m?variant=21553497539
http://www.vapecartel.co.za/collect...ss316-26awg-30awg-wire-3m?variant=25540771459
http://www.vapecartel.co.za/collect...28awg-fused-30awg-wire-3m?variant=21553371459

If I may make a suggestion for the next time you are looking for a specific product - when you post in the "Who has stock" forum, the vendors themselves can directly reply to your query, whereas here they may not.
Hey man any idea why ss claptons are so rare?
 
Hey man any idea why ss claptons are so rare?
I've also wondered and I think @n0ugh7_zw 's answer probably makes the most sense, especially when using a dual coil build with something like the 26 / 30 fused claptons. I use 28 + 32 ('simple') claptons for dual coil builds (usually 2.5 mm diameter, around 7 wraps each, which generally brings me to a 0.3'ish range). I would think that those monster claptons might work well for single coils or for the super-sub-ohm vapers (with the appropriate mods and batteries) though.
 
Last edited:
Hi guys,

So i made my first tripple wire coil yesterday. Used SS316 26G and span them together tightly. It came out looking good i wrapped it around a screw driver with a ID of about 3.2mm but it unwraps easily so probably 3.5mm now if not more. Anyway it came out good i loaded 1 coil and it read 0.27ohm at 6 wraps. Thought why not just run 1 coil at those ohms it seemed fine.

Preheated them quickly and it warmed up nice and evenly as my spaced coil builds normally do. So I'm happy with this have enough wire wrapped for another coil. I vape it at 50w and it is as if i have 2 coils in.

Here's a little picture below. Please note first time going single coil and wrapping so not neat but even for a beginner like me using basic stuff it works fine.

Cheers guys, hope you find the courage to try make your own wires. It is not too bad from what i experienced. Peace
 

Attachments

  • IMG-20170717-WA0006.jpeg
    IMG-20170717-WA0006.jpeg
    121.3 KB · Views: 73
Last edited:
Hi guys,

So i made my first tripple wire coil yesterday. Used SS316 26G and span them together tightly. It came out looking good i wrapped it around a screw driver with a ID of about 3.2mm but it unwraps easily so probably 3.5mm now if not more. Anyway it came out good i loaded 1 coil and it read 2.7ohm at 6 wraps. Thought why not just run 1 coil at those ohms it seemed fine.

Preheated them quickly and it warmed up nice and evenly as my spaced coil builds normally do. So I'm happy with this have enough wire wrapped for another coil. I vape it at 50w and it is as if i have 2 coils in.

Here's a little picture below. Please note first time going single coil and wrapping so not neat but even for a beginner like me using basic stuff it works fine.

Cheers guys, hope you find the courage to try make your own wires. It is not too bad from what i experienced. Peace
2.7 ohms? is that right ?
 
Hi guys.

Does anybody know of a place I can get SS Clapton or SS fused Clapton or at least the correct wire configuration to make my own. I'm currently on a kanthal Clapton and it is horrible compared to my normal ss24g spaced coils.

Thanks in advance



Sent from my SM-G900H using Tapatalk
Hello there,I make my fused Clapton coils using S.S. 316 wire usually 26gx2 wrapped with 36g and using the Bead a lon Wire tamer method with great success. I buy wire from eBay or from the China sites(FT. 3f tapes etc.)
 
Pro tip: if you want to make the Ω symbol in your posts, hold down Alt and type 234 on your Windows Num Pad.
 
Not at all, just that it's easier to type Ω than ohm. Gotta love Windows special characters. :inlove:
 
Back
Top