
A little older review of mine, but the Plus v.2 and Squonk BackPack are just too good not to post this.
Alright, alright, alright !!!!!!! Been dying to get to try out the new SteamCrave Plus v.2 Advanced Kit. Having already reviewed the Plus Special Edition Kit, I won't go into repetitive details on the kit here, but I will focus MORE on the Mesh Deck, and the Squonk Backpack !!!!!
For transparency, SteamCrave did offer discounted pricing for the purposes of this review. #IStillHadToPayForIt
The stuff, about the stuff .....
Specs:
30mm Diameter
Threaded Top Fill
8ml Standard Glass Tank Section E-Juice Capacity
16ml Metal Tank Extention Section E-Juice Capacity
Juice Flow Control
Knurled For Traction
Fully Closable
Postless Dual Coil Build Deck
10mm by 4mm Each Terminal
Side Mounted Hex Screws
Dual Wicking Ports
PEEK Insulated Positive Post
Various Build Deck Options
Single Mesh Strip Build Deck
Single Coil Build Deck
Velocity Build Deck
RDA Section
Holds 3ml E-Liquid Capacity
Deigned For Dripping
Squonk Capable
Adjustable Side Airflow
Custom Design
Open on Two Sides
Various Airflow Designs
Honey Comb Airflow holes
Dual Slots
Single Slot
Fully Adjustable
6mm Airflow Chimney Reducers
Metal and Glass
810 Drip Tip
Threaded 510 Pin
What's Included:
One Aromamizer Plus RDTA
One Spare 8ml Glass Tank Section
Two 6mm Chimney Reducers For Metal and Glass Tank
One Spare O-rings and Grub Screws
One Mesh Deck Kit
One Allen Key
User Manual
Steam Crave Sticker
SteamCrave never disappoints in their packaging.

or, what's included, they really go above and beyond.

The two decks included with the Advanced Kit were the Postless, and Mesher. Starting off with the postless. This tried and true setup hasn't changed much, but offers a flipable airflow ring, improved juice flow, etc. All the threads were buttery smooth, o-rings everywhere, and the fit and finish was great as always.

Loaded up some 21700's into the Hadron (you know why ...) to get ready..

Picked out some Vandy Vape Quad Core 5 wrappers for the test.

Stroked/pulsed/ready.....

A little wick lube, and we're getting closer ...

Inserting the deck into the tank using the keyed notches. The knurling on the juice flow made for easy adjustments, and every time I looked at the juice flow ports, I thought, "Glug, glug, glug".

Nothing new here, but about the only thing you CAN'T fill this with, is a FIREHOSE !!!!

The airflow has been improved, with TONS of options including a flip-able air flow ring. Loads of honeycombs, with 1, 2, and 3 band choices for airflow (same on each side).

The Tower of Flavor Power is ready !!!

*Skipping the P's and C's till later for easier reading and flow.* Meshy McMesh on deck !!!!
SteamCrave spec'd out these reducers for meshing, and single coiling. Having used them specifically for meshing, they work !!

Mesh Deck Kit Includes:
1 x Mesh Deck with Solid Pin
1 x Squonk Pin
1 x Tool
2 x Kanthal Mesh Strip 0.18ohm
4 x Spare Clamp Spring
2 x Spare Screw
1 x User Manual
Having not meshed very much there was a learning curve in handling/installing the delicate mesh strips, but with the included tool and driver, was fairly simple.

Pulsed at very low wattages per the instructions.

Rather than screw up the wicks, I used the included shoelace wicks, and was THAT easy.

After the first wicking I was getting some dry hits (gasp !!!), so on the redo, I actually read the instructions.


Inserted the mesh airflow reducer.

And off to the Meshy McMesh races I went.
*Skipping the P's and C's till later.* There's MORE !!!!! How much could I pack into ONE review ?? !!!
Enter, the SteamCrave 220 Squonk Backpack

220 Hadron Squonk Backpack Specs:
Dimensions - 102mm by 47.5mm by 17.5mm
15mL E-Juice Capacity
Threaded Top Fill System - Knurling
Top Pump System - 0.4mL Per Pump
Connected via Screws to Hadron 220 Box Mod
Available in Black and Gunmetal
Includes:
1 HADRON Squonk Backpack
1 Mounting Screws
1 Pack of O-Rings
1 User Guide

Mounting screws, extra o-rings, and a manual.

If you're lucky enough to own a Hadron, then you know how solidly it's built, and the backpack is no exception to that. Fit and finish were top notch, and a nice full tank window to keep an eye on your 15ml !!!

Here's where I took a chance. Thought about going matchy matchy, but decided to alternate colors like on the Hadron with black accents.

First things first, removed the stock pin, and replaced it with the squonk pin (short gold postless pin for comparison).

Primed the wick.

Then removed the squonk plug on the Hadron.

and the plug on the backpack.

Fought with the micro plastic bag and obtained the two screws (larger mounts in the bottom, smaller in the top).

The big bottom screw is obvious but I almost forgot about the smaller top screw. Had to use tweezers to get the screw in place.
