Thanks bud, it is quicker when the screen is on, I suppose I'll have to get used to it
Subox Mini Feedback
- Thread starter MunG
- Start date
Thanks bud, it is quicker when the screen is on, I suppose I'll have to get used to it
Not getting stuck so far but I do see the battery drop by one bar then back to full.
- Joined
- 7/8/14
- Posts
- 861
- Awards
- 24
- Age
- 38
No probs man. Had a few mods do the same.
- Joined
- 7/8/14
- Posts
- 861
- Awards
- 24
- Age
- 38
The battery dropping is down to the way the device measures the capacity of the battery. If you do not have high drain bats @bjorn then the capacity will drop dramatically when you fire. They measure the amps available vs the volts drawn at present to show remaining capacity, this is a instantaneously measured and calculated value this will be stable at rest but will fluctuate based on use
Retro fitted istick silicone sleave from @VapourMountain For R40 and Brand new glass R40!!!Sorted
- Joined
- 7/8/14
- Posts
- 861
- Awards
- 24
- Age
- 38
Goeie werk!! What exactly did you change?
I cut the diamond shape out for +- buttons and the square button at the top I cut out for firing button..I dropped it again just after I bought new glass and nearly pooped myself
Ok issue confirmation, mine does the battery level drop then pop back on again also. No button sticking but 4 or 5 times so far i have pressed the fire button and nothing happened. Battery door starting to hint at getting a possible rattle, moves a little down when little pressure is applied. All minor things but with the interconnectivity of the world these days it's great to share your experiences with a new device with other people and learn from them
No such problems experienced, almost finished a bottle of Carnage on this device, just the first time I used it, some spitting, dropped the wattage to 20, cleared the spitting, back up to 25 W and performing fantastically.
Just a question, Can you purchase these new vertical coils yet or use the existing Kanger coils??
I wanted to bring the new coils in but min order was a 1000.Then KangerTech will produce them. Just crazy. Who has money to bring in a 1000 coils. I am not there yet. Maybe one day. I am sure they want to sell the old coils first. But the old coils is also excellent. Never had any issues with them.
Thank You @SAVapeGear Thought I was doing something wrong in my searches on all vendor sites for these coils and could not find any mention of these "new" coils. Will practice my novice coil building "skills" on my existing mini and when the 0.5ohm "new" coil expires, hopefully will be proficient enough to add a self made coil.
Everyone has done a great Job on feedback,
I have had no issues on batteries, using Efest 2500/2800Mah, no drops at least when its fully charged, sometimes when it is at 1 bar i get a drop and back up, but then it needs a change after.
Might be batteries causing this ?
I have had no issues on the door, no show of rattles or loosening.
No scratches and I carry this around all day.
I don't see how the fire button gets stuck though, its almost a bit recessed too.
I have pushed a hell of a lot juice trough it already, a tank a day at least.
And lastly, delay on firing, not sure of that, sleep or on no issue, same as my iStick also, no problems there.
Nice work on the cover @Gert_Koen
Now we need someone to make us some.
I have had no issues on batteries, using Efest 2500/2800Mah, no drops at least when its fully charged, sometimes when it is at 1 bar i get a drop and back up, but then it needs a change after.
Might be batteries causing this ?
I have had no issues on the door, no show of rattles or loosening.
No scratches and I carry this around all day.
I don't see how the fire button gets stuck though, its almost a bit recessed too.
I have pushed a hell of a lot juice trough it already, a tank a day at least.
And lastly, delay on firing, not sure of that, sleep or on no issue, same as my iStick also, no problems there.
Nice work on the cover @Gert_Koen
Now we need someone to make us some.
Covers will come out shortly, if the mod is as popular as we think
I have Built my First Coil!!
a handcrafted spaced 2.5mm 1 ohm coil on 28 g wire!
However i did notice that i have sort of an intense drop in flavour... could any body recommend a decent coil to retain the flavour more?
This coil building thing is too much fun!
a handcrafted spaced 2.5mm 1 ohm coil on 28 g wire!
However i did notice that i have sort of an intense drop in flavour... could any body recommend a decent coil to retain the flavour more?
This coil building thing is too much fun!
I have Built my First Coil!!
a handcrafted spaced 2.5mm 1 ohm coil on 28 g wire!
However i did notice that i have sort of an intense drop in flavour... could any body recommend a decent coil to retain the flavour more?
This coil building thing is too much fun!
I am not familiar with the new Subtank Mini @Stoefnick - but well done on your first coil!!
Do you mean a drop off compared to the commercial coil?
Perhaps if you take a photo of the coil and wick setup it will be easier for people to advise you
More wire = more flavour. If possible gooi in there a 26 or 24 gauge microcoil, up the ID to 3 ,and see the flavour improve
@Silver I'm comparing it to the. 5 ohm coil that was on the rba that just required a wick to go.
Here are some photos I had to rewick to get a decent photo
It also works perfectly doing mtl but as soon a I do a lung hit I get a burning sensation in my nasal cavity.... Don't know if anybody has experienced that...
Sent from my GT-I9300 using Tapatalk
Here are some photos I had to rewick to get a decent photo
It also works perfectly doing mtl but as soon a I do a lung hit I get a burning sensation in my nasal cavity.... Don't know if anybody has experienced that...
Sent from my GT-I9300 using Tapatalk
unfortunately i only have 28 at my disposal
Twist two strands of 28 together to make thicker wire
Not too sure but it close to 26 I think
@ET howzit! So I've done what you advised : I have made a 9 wrap on a 2mm 8-9 wraps that effectively came to 1. 1 ohm
And then I made a 0.9 ohm with 7 wraps on a 2.5 mm
But my goodness I need about 7 more wats to make so sitting on 24 watts and barely making vapor and it's almost choking me with the massive throat hit that's unreal
please see pic below
Any extra advice you could offer?
Sent from my GT-I9300 using Tapatalk
And then I made a 0.9 ohm with 7 wraps on a 2.5 mm
But my goodness I need about 7 more wats to make so sitting on 24 watts and barely making vapor and it's almost choking me with the massive throat hit that's unreal
please see pic below
Any extra advice you could offer?
Sent from my GT-I9300 using Tapatalk
Up the wattage?
And take it down to 6 wraps
Heya all !
So this evening p I decided to build a coil again, because i love these bvc coils so damn much i was like, can i not use the rta and make my own bvc.
So i did. And damn, it works hell of a well, id show some pics but i am having too good a time on this thing.
One question, the rta seems to have less airflow just by looking at it i can see it, but vaping too, it is not an issue i am actually just impressed with the new rta.
@Vendors, get those damn coils asap !!
So this evening p I decided to build a coil again, because i love these bvc coils so damn much i was like, can i not use the rta and make my own bvc.
So i did. And damn, it works hell of a well, id show some pics but i am having too good a time on this thing.
One question, the rta seems to have less airflow just by looking at it i can see it, but vaping too, it is not an issue i am actually just impressed with the new rta.
@Vendors, get those damn coils asap !!
Similar threads
