I'm using it exclusively in sbs configuration now to avoid it frying itself with leaking juice
Suicide Mods & DovPo Abyss
- Thread starter Rob Fisher
- Start date
-
- Tags
- dovpo mods suicide mods
I'm using it exclusively in sbs configuration now to avoid it frying itself with leaking juice
So now you have a SBS three times the price of similar quality SBS's, was the adapter a separate purchase like most things for this? With the SXK Supbox loads was included and was only close to the price if getting the DNA version!
Is that in SBS mode?
Yes it is. Was lazy to work out how to coil and wick the Ether rba (I will admit I didn't want to have a leaky Sunday) , so used the tank I had ready and waiting.
Can it be used in SBS mode out the box or is there an adapter needed which is a separate purchase? i keep seeing photos of the Abyss alongside loads of extra bags that look like they might be bought separately, at the price i would expect things like the Ether bridge, 510 adapter etc all inclusive!
Extras sold separately.
Well the SBS kit was definitely an extra.
Haven't explored the box to see what comes standard.
But I know the SBS was extra (two battery caps and the 510). And the square button kit I bought extra as well.
Ouuuch!
I also felt like at the price point it should be have been a DNA 75 or DNA 60 chip (both the old b/w) versions, but it is what it is- I wanted to try the mod and got a good deal on an almost new one, so here we are.
Yeah, i have actually ordered one but concerned i will find it a waste of money especially as no doubt there will be more purchases needed else what's the point might as well just of got a minx of something much cheaper! I should of read the contents before pulling the trigger because after now looking at the listed contents i am just hoping it's incorrect and more is included else this must be one of the most overpriced devices out there!
If any dealers are reading this, there are a few interested buyers...
With it only being 60W until i saw the specs i was convinced it did have a DNA 60 chipset at the price so then thought all the bridges etc must be included when i found it had a proprietary chipset!
@JurgensSt is getting, I'm sure his prices will be the most competitive.
Last edited:
Those using the ether bridge, how often do you guys rewick? I am getting 2 to 3 tanks (18-22ml), and then need to rewick. N80 28/38 fused claptons spaced @0.4 ohms
It almost seems that it airlock and if i open the refill port it vapes fine for about 10 hits. Have tried CB prime, mavaton, titanium fibre, with various amount of cotton and length of cotton in the wicking ports.
It almost seems that it airlock and if i open the refill port it vapes fine for about 10 hits. Have tried CB prime, mavaton, titanium fibre, with various amount of cotton and length of cotton in the wicking ports.
Mine arrived and first big con lifting it out the box, too heavy! Bearing in mind a bridge, drip tip, battery and e-liquid will add to the weight yet i have many dual battery devices which with batteries installed and a full tank of liquid is lighter than this is out the box! The next disappointment is it's looks, some devices look in real life what i expect from seeing photos and some look much better in real life but although it might be because i have the Black but it seems to be very photogenic because it looks pretty bland in front of me! With no premium chipset under the hood just be half the price tops!
Looking forward to your review Tim
nope on both accounts
Thanks boet
Hi all
I recently purchased the abyss with the ether bridge. Just wanted to know if anyone is having the same problem as me.
The bridge seems to be a lil too tall for the tank. When twisting the battery cap on, I was catching the top of the bridge, and the drip tip thingy wouldn't screw all the way down.
The top of the chimney was sticking out above the tank. The bridge was already pushed all the way down.
I ended up filing a good half a mm at the top of the chimney. Now at least the battery cap/ plate doesn't catch the chimney when sliding closed. The drip tip still doesn't screw down flush, but it is better.
I recently purchased the abyss with the ether bridge. Just wanted to know if anyone is having the same problem as me.
The bridge seems to be a lil too tall for the tank. When twisting the battery cap on, I was catching the top of the bridge, and the drip tip thingy wouldn't screw all the way down.
The top of the chimney was sticking out above the tank. The bridge was already pushed all the way down.
I ended up filing a good half a mm at the top of the chimney. Now at least the battery cap/ plate doesn't catch the chimney when sliding closed. The drip tip still doesn't screw down flush, but it is better.
the abyss aka the gap mod.
try adding an oring to the base were the bottom of the glass sits. that will give the tank the additional height so that bridge will sit flush to the top of the tank.
Similar threads
