B
BioHAZarD
Guest
so is there no USB port at all or do you need to dismantle the mod to get to it?
SXK BILLET BOX - Reviews & Discussions
- Thread starter Deckie
- Start date
-
- Tags
- discussions reviews
None at all...
Or charge your batteries, for that matter.
So, it just about evens out I guess.
Yeah that too but I've always been an external charger kinda guy because in the early days, the mods used to heat up a bit when charged directly and I never felt comfortable leaving it unattended so its just a habit i formed.
I did some further controlled experimentation in my gym room, leaving 4 x 18650 batteries in a nitecore charger for a full week unattended. Checked on it every few days and no temperature or any other significant changes besides a full battery
Also, with this in hand as my EDC I can go for a full day, sometimes longer, without being tethered to a charger or desk or juice supply. That's perfect for me because I'm always and forever on the move.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Is it the BB's negative terminal plate that did that to your battery wrap on the negative side?Also, with this in hand as my EDC I can go for a full day, sometimes longer, without being tethered to a charger or desk or juice supply. That's perfect for me because I'm always and forever on the move.
Sent from my iPhone using Tapatalk
Is it the BB's negative terminal plate that did that to your battery wrap on the negative side?
No that was me... After flattening the plate a tad too much, I made a kind of lip in the wrap so when i put in the battery, I rotate it a bit until the terminal catches on the wrap
Do you need the Exocet to get the full BB experience? I'm so tempted to get one but with all the additional extras it's a bit pricey
Yes, no doubt.
@Andre, maybe I am an old fool, but I prefer the insider? Almost the same vape as a RM2...
Although you are an old fool... I would say that you don't have to have an Exocet or have to have an insider... You can have either and make it work for you. Both of them can offer excellent results which are build dependent. I have 2 BB's, one exo and one insider. I also have a spare boro with a stock kanger coil for something hassle free.
@Amir , I think my problem started when I first wick the exocet, it flooded completely, and that put me off a bit. When I started off with the Insider, everything worked out just great, so I pulled the trigger on two more mods and 3 more Insiders. I want to try the Flow so bad, maybe, just maybe one will pop up in the classifieds.
I think mine started when I first wicked the insider... It was so good that i loved it dearly. Upon rebuilding and wicking and suffered endlessly up until recently and went back to the steamtuners video of the insider and followed it step by step... Now I love it again. Both have their place for me and constantly changing boro's grew tiresome.
Interesting, even with thicker wicks I never got dry burns on the Exocet. Did you comb yours out?My first rebuild on the Exocet:
6 wraps 2.5mm 26ga SS316 @ ~0.43Ω
I thinned the wick out quite a bit before putting everything together.
The flavor is absolutely fantastic!!
I'm curious to see if I get more flavour from even thinner wicks. This thing doesn't flood as easily as it looks.
My experience was the other way round
When I first wicked the Insider, the juice - through a clever and cunning process of osmosis - transferred itself from the tank to... well, everywhere-except-inside-the-tank. I eventually got it working and found it to be pretty much the same as the Exocet for me - but then, my taste buds have never fully recovered from smoking.Yeah I combed it out properly. To a point where I could just about see through it.
Airflow feels better. Flavor is through the roof. I'm extremely pleased with the current build.
Only problem is it so good now I can't stop vaping on it. I've basically turned this thing into a rebreather :|
Hhahah I'm the same with mine. Moved my menthols over to the Skyclone and the yogurts to the BB - but the menthols want to be in the BB. I can feel it.
The menthols in the BB indeed are a match made in heaven!
What build are you currently running on your BB?
At the moment just a simple 26ga Nichrome microcoil (spaced). Think it's 4 or 5 wraps - comes out to about 0.45. I've found that simple coils deliver the goods just as much as the advanced ones in the Exocet. Especially since it's hard as hell getting a big coil in there.The menthols in the BB indeed are a match made in heaven!
What build are you currently running on your BB?
Very similar to my current build it seems. The Exo definitely doesn't mind running simple coils, that is for sure!
And luckily the Exo seems somewhat idiot-proof so even I can manage to get a working build going on it
(I'm still going to master that Ammit!)
Well I did manage to get it to dry-hit on me once. But that's because the tank was empty, so....Very similar to my current build it seems. The Exo definitely doesn't mind running simple coils, that is for sure!
And luckily the Exo seems somewhat idiot-proof so even I can manage to get a working build going on it
(I'm still going to master that Ammit!)
As for the Ammit... hmmpff. I'm over it
My experience was the other way round
They will recover eventually and you'll find yourself going back to juices and devices that you thought had little to no flavor. I'm actually surprised by how sensitive my taste buds have become. I no longer need to add salt or other spices to my food
Sent from my iPhone using Tapatalk
Day 2 of the rebuild was a bit less ... nice.
Flavor started off good but faded during the day until it got pretty much flat.
It started producing less and less vapor ... and somehow ended in a nice big leak.
I've taken everything apart and rewicked the atty but its not quite there in terms of flavor this time around.
I've noticed I have ohms fluctuating between 0.4Ω and 0.46Ω even though I've tightened the pin that makes contact with the mod.
I'll be playing around with it over the next couple of days to see if I can figure out how to get the best experience out of it.
It won't be a proper hobby without these little niggles
Flavor started off good but faded during the day until it got pretty much flat.
It started producing less and less vapor ... and somehow ended in a nice big leak.
I've taken everything apart and rewicked the atty but its not quite there in terms of flavor this time around.
I've noticed I have ohms fluctuating between 0.4Ω and 0.46Ω even though I've tightened the pin that makes contact with the mod.
I'll be playing around with it over the next couple of days to see if I can figure out how to get the best experience out of it.
It won't be a proper hobby without these little niggles
Similar threads
