The Doggy RBA by Atmistique for the BB

I think one have to go 3mm ID with airflow wide open,without airflow ring.
 
I know you've probably figured it out by now but judging from the mounting holes on the posts you need to wrap the coil anti clockwise. Might make mounting the coil easier.
 
I know you've probably figured it out by now but judging from the mounting holes on the posts you need to wrap the coil anti clockwise. Might make mounting the coil easier.
Yip.This is a anti clockwise wrap deck.
 
Much better with 3mm ID coils.

This is 2 x 26ga core wrapped with 38ga NI80.

6 Wraps.

20170505_202123.jpg 20170505_202111.jpg
 
Much better with 3mm ID coils.

This is 2 x 26ga core wrapped with 38ga NI80.

6 Wraps.

View attachment 93820 View attachment 93821

So, how are you enjoying your RBA. After a week or so of use, i went back to the exocet to see if i was missing anything and wow i was. I think flavor wise exocets are still the best for me. The doggy is good. Very close to the exo but still it ain't no exocet. What i will say though it is better than the insider.
 
So, how are you enjoying your RBA. After a week or so of use, i went back to the exocet to see if i was missing anything and wow i was. I think flavor wise exocets are still the best for me. The doggy is good. Very close to the exo but still it ain't no exocet. What i will say though it is better than the insider.
I still have to experiment some more.But I think they will all have its place.But I am really impressed with the Doggy.

Next I want to do a nickel build for TC vaping and the deck is perfect for that.

I think my wicking on the build that I have done is not right at the moment.

But it takes time to find the perfect build for every atty.

With no exocets available,there is nothing else I can do.

At least Rob told me about the insider,so I didn't want to get one of them.
 
But the latest build I posted is a real winner,airflow is perfect.Just need to get the wicking right.Maybe reduce the build with one or 2 wraps I think.

I hardly get any juice build up in the drip tip.

What do you guys do with the juice that build up in the drip tip of the BB?(Or is it just me that get it?)

That is pain for me.Always having to clean the tip with a tissue.
 
I noticed that with doggy rba. I do also get that with the exocet but not as much. But mine is in the 510 adapter not the drip tip itself. Ordered a few threaded bb tips so will test with that.
 
I very rarely get a juice build up in my drip tip... have had it once or twice but not normally!
 
Did a NI200 build,3.5mm ID,10 wrap spaced 28ga ,running in TC mode on the BB at 18w and 250c.

Very nice !!!
 
Anybody struggling with 80/20 vg/pg liquid in the doggy?

Seems to not like the long 10 second draws.

I tried wicking less and more fluffy but it seems the 80vg is just to thick.

Also, winter doesnt help...
 
Anybody struggling with 80/20 vg/pg liquid in the doggy?

Seems to not like the long 10 second draws.

I tried wicking less and more fluffy but it seems the 80vg is just to thick.

Also, winter doesnt help...

A non vaper reading that post in isolation would be very confused as to what is going on.
Lol @Christos
 
Anybody struggling with 80/20 vg/pg liquid in the doggy?

Seems to not like the long 10 second draws.

I tried wicking less and more fluffy but it seems the 80vg is just to thick.

Also, winter doesnt help...
Maybe try some Koh Gen Do, Scottish roll
 
Been running 2.5mm ID in thr doggy for a while.
Don't have much time this week buy I was convinced to try these coils I got from @smilelykumeenit .
Decided to go 3mm ID as the doggy has a massive build deck.

Build as follows.
All Ni80 as per special request.
3x 30AWG inner
40AWG outer alien clapton.
0.6 ohms
Some pics.
20170613_211122.jpg 20170613_210913.jpg 20170613_210813.jpg 20170613_210451.jpg 20170613_210438.jpg 20170613_210318.jpg
The vape is noticeably smoother and Its on par if not better than the skyline.
Very exited to try one of these coils in a skyline perhaps on Friday when I have some down time as I was running the same coil in the doggy as the skyline.
Skyline was better.
@smilelykumeenit's coil has just made the BB tops so should be a massive leap in flavour for the skyline.
@Amir you wanted some results so here they are!
These coils are also going to improve my battery life!
 
Might have to start a @Rob Fisher's Doggy experience thread to get rob to try the doggy with a similar coil :D
 
Well at least you can say you don't have a BB for the atty....
@Silver needed a bit of a push :D
Perhaps the best is to get @Silver a doggy.... might get him to actually "condider" a BB If he knows there is an atty he has with no mod.
I think his style of vaping is a good match for the billet box.
 
Been running 2.5mm ID in thr doggy for a while.
Don't have much time this week buy I was convinced to try these coils I got from @smilelykumeenit .
Decided to go 3mm ID as the doggy has a massive build deck.

Build as follows.
All Ni80 as per special request.
3x 30AWG inner
40AWG outer alien clapton.
0.6 ohms
Some pics.
View attachment 97990 View attachment 97991 View attachment 97992 View attachment 97993 View attachment 97994 View attachment 97995
The vape is noticeably smoother and Its on par if not better than the skyline.
Very exited to try one of these coils in a skyline perhaps on Friday when I have some down time as I was running the same coil in the doggy as the skyline.
Skyline was better.
@smilelykumeenit's coil has just made the BB tops so should be a massive leap in flavour for the skyline.
@Amir you wanted some results so here they are!
These coils are also going to improve my battery life!

Looks and sounds amazing. I think I need me one of these to try


Sent from my iPhone using Tapatalk
 
Doggy test in progress... so far apart from the slight painful wicking I'm impressed with the flavour and it certainly has a little more air than the exocet!
Doggy 001.JPG Doggy 002.JPG
 
Back
Top