The Mini Volt Thread

Pixstar

Elite Vaper
LV
27
 
Joined
30/7/15
Posts
1,428
Awards
28
Location
Bassonia, Joburg South
Hi all.
Creating this thread so we can share experiences with this little awesome device.
Please share your setups, tanks, drippers, builds, battery life, tips etc. Thanks.
 
Got the bambino on mine. Couldn't vape much due to the flu. But single coil 26ga 2.5m ID at 0.9 ohms. Vapes superb!

I would suggest 26,28 or 32g wire in this. Less ramp up time and less power consumption. On standard mode. Should be efficient

3ec679e0e3d7d88de3177d6b1f820af2.jpg
 
would be great to get general feedback about battery life too, thanks!
 
As per post in the other thread...
At 0.80 Ohms (0.87 on Mini Volt) 25g, 7 wraps, vaporwire, 20W to 23W, I got 1 and 1/4 tanks from the Goblin Mini. So approximately 4ml.
 
As per post in the other thread...
At 0.80 Ohms (0.87 on Mini Volt) 25g, 7 wraps, vaporwire, 20W to 23W, I got 1 and 1/4 tanks from the Goblin Mini. So approximately 4ml.
I also get about 4 ml with 0.85 Ohms (26 g Kanthal, 2.5 mm ID, 8 wraps) from 16.5W to 20.5W in power mode.

Does anyone else get an ohm reading jump (only upwards) by between 0.03 - 0.07 when firing? (I've checked with the same tank and build on VTC Mini and RX200 and it only seems to be the case on the Mini Volt)
 
Have not checked when firing (it's charging now, and I'm at a school concert) but I have noticed that it started at 0,85 and ended at 0,87. Reversed temp control lol.
PS. Reading on D2 is 0,81)
 
I hooked mine up to my little usb current reader thingie plugged in to a 3A usb charger, the mod is chrging at 5V and drawing 0.39A. This little gadget has a timer on it and hopefully will report the total charging time as well as how many mAhs get jammed into the battery, I'll report back once the mod is charged up.

12648194_10208503315481920_1888765739_n.jpg
 
It turns out that the clock doesn't stop when it's done charging, it was just shy of 5 hours when the mod read fully charged. I would really have expected a quicker charge time with such a small battery.

12650306_10208504774838403_1502022270_n.jpg
 
Here is the little Mini Volt with the best performance match I've found so far, the Kayfun Monster V2 with the nano tank.
12650428_10208504774358391_1576169203_n.jpg

A blacked out Subtank Mini doesn't look too bad either, it works great but the tank does look a bit disproportional.
12576020_10208504774198387_532225866_n.jpg
 
Got mine today, charged fully. After about 10 puffs at 30w on a 0.3ohm build the battery is already at half :p

Definitely going to have to go with the 0.8ohm recommendation in the manual. :-D
 
Here is the little Mini Volt with the best performance match I've found so far, the Kayfun Monster V2 with the nano tank.

A blacked out Subtank Mini doesn't look too bad either, it works great but the tank does look a bit disproportional.
Where do you get your funky dip tips ?
 
you guys think i could run a prebuilt 1.8ohm coil in a triton on this device?
 
Am loving this thread - thanks for starting it @Pixstar

This is such a cute little device.

Now I have FOMO :eek:
 
Got mine from @Sir Vape today. Thanks guys. Originally got it because my better half took over my subox kit (can't say no the my lady now can I) but after seeing it and messing around with it I am seriously contemplating getting myself one too now. Sweet little device that's really solid and pack a punch for its size.
 
I think we need a drip tip vendor that specialises in driptips. The store can be called " Just the tip"
 
I'm a total novice wrt proper vaping goodies (aka not my old Twisp!) but when I saw the mini volt I had to get one, got it today and it's even smaller than I thought! I'm still trying to decide on what setup to go with but will admit to sticking my Ijust 2 tank on and giving it a few long puffs. No idea what to set it at but I tried 35.5 with a 0.5ohm coik and rather enjoyed it... I wont damage it with that will I?

I'm leaning towards a Goblin mini but I really want something small and black, any suggestions?
 
I'm a total novice wrt proper vaping goodies (aka not my old Twisp!) but when I saw the mini volt I had to get one, got it today and it's even smaller than I thought! I'm still trying to decide on what setup to go with but will admit to sticking my Ijust 2 tank on and giving it a few long puffs. No idea what to set it at but I tried 35.5 with a 0.5ohm coik and rather enjoyed it... I wont damage it with that will I?

I'm leaning towards a Goblin mini but I really want something small and black, any suggestions?
Im running a .5 ohm coil at 35W as well. Should be good.
Im not liking the goblin mini because of the potential leak from the base air hole. Im very funny when it comes to juice on my mods.
Lower your watts for less vapour and less Nic hit. Also higher watts will lead to more juice consumption.

Small and black? My wife has a dress like that.
Im leaning towards a thong :D
 
Back
Top