The Odin Thread

[jtgrey]

@Alex yes very true my lungs nearly packed their bags and left this morning after a long lung hit

Rayon =1
Jacques =0

Lessons learned

 

[Alex]

@Alex yes very true my lungs nearly packed their bags and left this morning after a long lung hit

Rayon =1
Jacques =0

Lessons learned

 

[Andre]

The only problem with having so little wick, long lung hits.

Yeah, good point. I am used to ceramic, which takes a lot of juice and mostly do mouth to lung.

 

[jtgrey]

The black looking so damm sexy ! Thanks @Yusuf Cape Vaper !

 

[Andre]

The black looking so damm sexy ! Thanks @Yusuf Cape Vaper !View attachment 19446

Yes, but not as sexy as the black Cyclops.

 

[LandyMan]

I am quite surprised by this, the supplier sent me additional copper screws with this batch which have a few mm of additional thread so they were all fitted with the spacer/washer. Please see if yours is in place on the copper screw, maybe I skipped one? Please be careful with the copper screw though, don't over tighten it, it being hollow they can snap off.

@JakesSA, here it is disassembled. I am guessing you are referring to the white spacer around the copper screw?

 

[JakesSA]

Yes that takes the total length of the 510 to around 4.8 mm which should be long enough for a Reo even when fully tightened .. or so I thought ..

 

[LandyMan]

So rebuilt the coils for the Odin this morning.
2mm ID
Kanthal A1 28 AWG
6 turns for a total of 0.5 ohm

I also decided to go straight into verticals

Flavour is very good, but the lung hit on the Odin is too strong for me ... burns my throat too much. So I have the airflow closed almost all the way, for nice mouth to lung similar to the RM2.

 

[jtgrey]

@LandyMan I had the same problem so I went to a .8ohm build and the lung hit is much softer now . Also I am using micro coil . And ID is 1.6

 

[LandyMan]

@LandyMan I had the same problem so I went to a .8ohm build and the lung hit is much softer now . Also I am using micro coil . And ID is 1.6

I said I wanted to go for around 1ohm, but again I was getting impatient with the wrapping. I am such a douche
After a couple of toots, opened the airflow up to about 75%, and much better now. I also think it might be my 6mg juice. Mixed myself the wrong nic content this last time. I normally do 3mg

 

[Andre]

So rebuilt the coils for the Odin this morning.
2mm ID
Kanthal A1 28 AWG
6 turns for a total of 0.5 ohm

I also decided to go straight into verticals

Flavour is very good, but the lung hit on the Odin is too strong for me ... burns my throat too much. So I have the airflow closed almost all the way, for nice mouth to lung similar to the RM2.

That, for me, is the perfect coil positioning for the Odin.

 

[LandyMan]

That, for me, is the perfect coil positioning for the Odin.

Your picture did inspire it ... thanks @Andre

 

[Silver]

Great setup @LandyMan !

 

[LandyMan]

Great setup @LandyMan !

Thanks @Silver

 

[Alex]

Thanks @LandyMan and @Andre for that vertical coil idea, I've just replicated the one above exactly with koh-gen-do wick from @Yiannaki. And I have to say it.

This build rocks, big time.

Vertical coils ftw in the Odin, so thanks guys

 

[jtgrey]

Thanks @LandyMan and @Andre for that vertical coil idea, I've just replicated the one above exactly with koh-gen-do wick from @Yiannaki. And I have to say it.

This build rocks, big time.

Vertical coils ftw in the Odin, so thanks guys

?

 

[Alex]

?

And you too bro, didn't mean to exclude you on purpose

 

[Andre]

Thanks @LandyMan and @Andre for that vertical coil idea, I've just replicated the one above exactly with koh-gen-do wick from @Yiannaki. And I have to say it.

This build rocks, big time.

Vertical coils ftw in the Odin, so thanks guys

Glad you like it, Alex.

 

[jtgrey]

@Alex sorry bro that was a typo on my part but thanks anyway . It is actually all @Andre idee . Big thanks to him . I coiled my onslaught the same way and it is awesome as well . Just need to make it bottom feed

 

[jtgrey]

Was exactly going to ask if any off you use the onslaught on a Reo .

 

[Andre]

Was exactly going to ask if any off you use the onslaught on a Reo .

Not that I know of, do not remember it being mentioned here at all.

 

[Silver]

Thanks @LandyMan and @Andre for that vertical coil idea, I've just replicated the one above exactly with koh-gen-do wick from @Yiannaki. And I have to say it.

This build rocks, big time.

Vertical coils ftw in the Odin, so thanks guys

@Alex, are your vertical coils spaced or compressed?
Wonder if it makes a difference
I see @LandyMan has spaced coils?

 

[Alex]

@Alex, are your vertical coils spaced or compressed?
Wonder if it makes a difference
I see @LandyMan has spaced coils?

Mine are spaced. But I am about to compress them now.

 

[Yiannaki]

Thanks @LandyMan and @Andre for that vertical coil idea, I've just replicated the one above exactly with koh-gen-do wick from @Yiannaki. And I have to say it.

This build rocks, big time.

Vertical coils ftw in the Odin, so thanks guys

Pics or it didn't happen

PS hope you're enjoying the koh gen do. Will drop off more when I'm in your hood again!

 

[LandyMan]

Yes that takes the total length of the 510 to around 4.8 mm which should be long enough for a Reo even when fully tightened .. or so I thought ..

Where can I get these spacers. Local hardware store doesn't have