From what I have read on here and on ECF, probably around 1.2 ohms would be the average.
The Reomiser 2
- Thread starter devdev
- Start date
HI @Arthster
There isn't really an average as such for the Reo itself. It does depend also on which atty. But this is the Reomiser 2 thread. As @Andre pointed out - I can imagine from ECF - 1.2 ohms seems to be where most are at.
My Reomisers are coiled dependent on the juice
Around 1.0 to 1.2 ohms for the fruity flavours
1 ohm for my VM Choc Mint/Coffee blend
0.5 to 0.9 ohms for the tobaccoes and some complex juices.
I am not a big dessert fan.
The RM2 coil is quite close to your mouth - that to me explains part of the reason why the flavour is good. But yes, it does tend to get hot when you go lower down in ohms and higher in power. You could fit a longer drip tip to help with that though. I have never tried. But remember, the RM2 is a mouth to lung atty (unmodified) so the toots tend to be shorter. So it doesn't get unbearingly hot. At least not for me.
Thanks @Silver To be honest I think that maybe I was testing subohm with the wrong flavors. and that may be the reason why I keep going back to the 1.2 average.
But the answers I got here has now helped intrigue me. I think I am going home and experimenting this evening with the flavors I have.
Thank you, will try that
Thank you. I just did the duobble strand and works very nice. Big thank you on that burning will not make it fray, it makes it sommer neat
Thank you. I just did the duobble strand and works very nice. Big thank you on that burning will not make it fray, it makes it sommer neat
Awesome - glad it worked for you.
Hi @vaalboy and @kimbo
Just a quick message to both of you
When you get a chance next - please can you post a pic of that double ekowool build on the RM2
I just want to see what it looks like and where the wool is going.
I would like to put that into my queue of next builds on my RM2.
I only built a single strand before and had it in two RM2s for a while - but then I got tired of it. I found the flavour was good but not outstanding like the first few hours of cotton. Maybe the double strand will be better.
Do you guys fold a single strand or just have two separate strands?
Just a quick message to both of you
When you get a chance next - please can you post a pic of that double ekowool build on the RM2
I just want to see what it looks like and where the wool is going.
I would like to put that into my queue of next builds on my RM2.
I only built a single strand before and had it in two RM2s for a while - but then I got tired of it. I found the flavour was good but not outstanding like the first few hours of cotton. Maybe the double strand will be better.
Do you guys fold a single strand or just have two separate strands?
@Silver i took one stand and looped it. Took a paperclip with them and just wrapped the flat Kanthal around that. Once done i took the paper clip out and burned the living daylights out of the coil before mounting it. When i was done mounting, i clipped the loose end side short up to the coil, and the loop i cut one side of and positioned the other strand between the two posts. So i have a double strand going through the coil but just a single between the posts.
Like @vaalboy said if you burn the ends the Ekowool don't fray
Hope this helps
NIce solid textbook build that. Enjoy 2015.Here's my build to take me into the new year on my Reo
0.61 ohms 26Kanthal 6/7 wraps
View attachment 18563
View attachment 18564
View attachment 18565
Playing again twisted 28g.
Neat, very neat.Playing again twisted 28g.
That is a good looking coil. What do you gain from twisting coils though?
For me, more surface area and the flavour is better, twisted wire also has a bit of wicking capability.
Ok cool makes sense. thanks
I always seem to come back to this.
7/6 wraps 26g 2mm ID.
Lets see how long this lasts before my fingers start itching.
7/6 wraps 26g 2mm ID.
Lets see how long this lasts before my fingers start itching.
Perfect coil, perfect firing! That leg is so cold one could touch it.I always seem to come back to this.
7/6 wraps 26g 2mm ID.
Lets see how long this lasts before my fingers start itching.
I always seem to come back to this.
7/6 wraps 26g 2mm ID.
Lets see how long this lasts before my fingers start itching.
Super coil @Gazzacpt
What is the resistance?
I also noticed you put the "underside" leg on the right hand side. I put it on the other side, where the post hole is slightly lower. Any reason you do it this way?
Morning. When I build for the RM2 I try bend the legs so they both come "out" under the coil. I don't need to worry about them shorting on the deck and makes it easier for me to position the coil and run my wick through.
Resistance should be between 0.6 ish
Superb coil @GazzacptI always seem to come back to this.
7/6 wraps 26g 2mm ID.
Lets see how long this lasts before my fingers start itching.
This was also my coil of choice for the rm2.
@Silver, this is what I tried to wrap for you that one day. But it ended up being a fail because of the wire we had.
It should measure in at about .65 or so.
I broke the coil in the RM2 this morning, and built this one:
28 Guage, 1.0ohm
Haven't tried it yet though
28 Guage, 1.0ohm
Haven't tried it yet though
I broke the coil in the RM2 this morning, and built this one:
28 Guage, 1.0ohm
Haven't tried it yet though
@LandyMan I'm not sure if I'm seeing correctly but please double check your coil, I'm using tapatalk and the photo is a bit blurry but it looks as though one of the wraps are overlapping another.
Sent from my S4 LTE using my finger
Similar threads
