The Reomiser 2

[RevnLucky7]

LOL @RevnLucky7
You may be right about that
Thank goodness I have a few mls of most juices remaining - just so I can retest them later in different equipment

May need to add an Ekowool footnote to all my reviews, one by one....
You giving me more work to do!

You do realise that the more work like this you give me, the less frequently I can buy new juices

It's all about your experience mate. Juice sales will survive. I find it funny that the creamy stuff we discussed over the phone that you do not like is also the kind of flavor I found gets filtered hard and loses most tones with cotton. That's just my opinion. Would love to hear how this pans out for you.

 

[Silver]

It's all about your experience mate. Juice sales will survive. I find it funny that the creamy stuff we discussed over the phone that you do not like is also the kind of flavor I found gets filtered hard and loses most tones with cotton. That's just my opinion. Would love to hear how this pans out for you.

No worries @RevnLucky7
I hear you about the filtering regarding cotton
Am keen to try the Ekowool and give it a proper go

 

[MurderDoll]

I need some advice.

I'm gonna be investing in some proper batteries so I can sub ohm if it pleases me.

I been looking at the efest batteries. But I see the Sony VTC4 is the same price with higher amp. They both sitting in the same price range.

Which would be a better one to go for?

Reason I ask ideally I'd get the vtc5, but then I would only be able to get 2 at best. Whereas the vtc4, I could get 3.

Should I go for the Sony or the Efest?

 

[Andre]

I need some advice.

I'm gonna be investing in some proper batteries so I can sub ohm if it pleases me.

I been looking at the efest batteries. But I see the Sony VTC4 is the same price with higher amp. They both sitting in the same price range.

Which would be a better one to go for?

Reason I ask ideally I'd get the vtc5, but then I would only be able to get 2 at best. Whereas the vtc4, I could get 3.

Should I go for the Sony or the Efest?

The Sony VTC, no doubt at all.

 

[TylerD]

IMO I will just go with the Efest batteries. Awesome batteries and probably authentic. I'm scared of getting AW's or Sony batteries in SA. But, that's just me.

 

[MurderDoll]

The Sony VTC, no doubt at all.

Awesome. That's what I thought too. But I wanted to make sure first.

So sacrificing a bit of power won't be an issue?

 

[Andre]

IMO I will just go with the Efest batteries. Awesome batteries and probably authentic. I'm scared of getting AW's or Sony batteries in SA. But, that's just me.

Good point on the authentic, but so far the Sonys sold locally seem to be authentic. Problem for me with the Efests are that their claim on Amps are not for continuous discharge current but for a spiking current. Thus, the continuous discharge current of their 2500 mAh batts shows 35A, but is in fact 20A for continuous discharge current, which is what one should be looking at.

 

[TylerD]

Good point on the authentic, but so far the Sonys sold locally seem to be authentic. Problem for me with the Efests are that their claim on Amps are not for continuous discharge current but for a spiking current. Thus, the continuous discharge current of their 2500 mAh batts shows 35A, but is in fact 20A for continuous discharge current, which is what one should be looking at.

Okidoki. I'm glad to hear about the Sony batteries being authentic. I might just get some then.

 

[Andre]

Awesome. That's what I thought too. But I wanted to make sure first.

So sacrificing a bit of power won't be an issue?

What power are you talking about? Do you mean the mAh rating? The latter gives an indication of how long the battery will last, so with lower mAh you might have to switch batteries more frequently.

 

[MurderDoll]

IMO I will just go with the Efest batteries. Awesome batteries and probably authentic. I'm scared of getting AW's or Sony batteries in SA. But, that's just me.

The Sony batteries would be ordered from VapeMob.

They the only ones I know that have stock of the Sony batteries.

What power are you talking about? Do you mean the mAh rating? The latter gives an indication of how long the battery will last, so with lower mAh you might have to switch batteries more frequently.

Yeah. That's it. The mAh rating is lower on the Sony batteries. But not by much.

 

[Alex]

I had the goal of disassembling the RM2 to give it a good clean, but besides unscrewing the negative post, I gave up. And just resorted to using a syringe with needle, and blasting boiled water through it.

The positive post was refusing to budge, and I don't have a spare rm2 in case things go pear shaped. The posts are made out of soft brass, so it wouldn't be hard to stuff them up. I also notice that my center pin does not have a means of unscrewing with a flathead screwdriver like the one in the tutorial on ECF. And I couldn't find any info regarding how that comes apart. I assume that once both posts are removed, the ceramic deck just unscrews?

I decided not to tempt my fate.

 

[Yiannaki]

Had an itch to build a new coil today for Eva, so I made one this morning that has kept me more than satisfied all day

28g, 1.5mm ID, 7 wraps, 0.98 ohms. Stuck a fresh battery in the vape it and it was hitting like a steam train

Here's a pic

 

[RIEFY]

seems im liking the .95ohms range aswell. ive been running this type of setup for a couple of days now and find it much better then micro coils.

6wrap dirty/ugly coil 28g around mu mini screw driver thread with some silica

Sent from my GT-I9500 using Tapatalk HD

 

[Silver]

Superb photos @Cape vaping supplies

I am also liking the 0.9 ohm range. But am doing microcoil (touching wraps) with cotton

How do you find the spaced wraps with silica compare to the microcoil with cotton?

 

[MurderDoll]

Decided to be adventurous with the REO.

Built a big coil.
26g Kanthal
4mm ID
5 wraps

Should be interesting.

 

[johan]

Looks great @MurderDoll - what wicking material are you going to use?

 

[The Golf]

Twisted flat ribbon ugly coil. Not sure what gauge, got it from eviltoy. .8ohms good flavour TH not to bad but im vaping 6mg so would expect it to b low

 

[The Golf]

Oooops forgot the pic.

 

[Yiannaki]

@MurderDoll and????? Whats the verdict?

 

[TylerD]

Looks great @MurderDoll - what wicking material are you going to use?

I think a Lilet will fit in there.

 

[The Golf]

Sorry. ID.10T problems

 

[MurderDoll]

Looks great @MurderDoll - what wicking material are you going to use?

Unfortunately my only selection is cotton.
Postal strike is annoying. Still haven't received the cellucotton yet.

@MurderDoll and????? Whats the verdict?

Its not bad actually.
Takes a bit to warm up. But vapes nicely. Has great flavour!

I think a Lilet will fit in there.

Ha ha ha!
You could be right!
I took my usual amount. Folded it double and it still wasn't enough!

 

[Silver]

Wow, that is a big coil indeed. Did you measure the resistance?

How does it differ from the smaller ID coil?

 

[MurderDoll]

Wow, that is a big coil indeed. Did you measure the resistance?

How does it differ from the smaller ID coil?

No.
I actually didnt.

Going on a gut feeling I would say its around the 1.2 ohm mark.

It managed to survive through the day and I still have my hand. So I would call that a success.

 

[thekeeperza]

0.9x0.1 ribbon 2 2mm pieces ekowool... Reomiser is definitely very easy to build on