The Reomiser 3

[Mufasa]

Hi Reonauts. Well, it has been a week now with the Reo Grand and RM3. I have a few coil questions. I have tried various coil options, sometimes 3 different coils in a day and had some hits and misses. I was hoping some other RM3 owners can post their perfect coil setup.

Coils I have tried:

Paracoil - 28G - 0.6 Ohms - 2mm ID - the most vapour so far, taste a bit muted, RM3 gets friggin hot

Dual coil - 28G - 0.5 Ohms - 1.5mm ID - no performance at all, almost like the batteries aren't able to fire the coils. It takes forever to heat up

Single micro coil - 28G - 1-1.2 Ohms - 1.5mm ID - performs very well, good flavour and vapour

Twisted coil - 28G - 0.5Ohms - terrible, no flavour, again it feels like the batteries aren't able to fire the coils efficiently

Single micro coil - 27G - 0.8-1Ohm - 1.5mm ID - OK, but takes long to heat up

I use two Efest 3100mAh button top batteries and also an Efest 2500 mAh flat top battery. The flat tops appear to give a lot better performance, but I have to really push the fire button hard to make contact and I am scared that I will destroy the firing pin or positive contact.

My favourite setup so far must be the single micro coil at 1-1.2 Ohms using 28G and Japanese cotton.

Any advice on coil setups for the RM3 will be much appreciated.

 

[Andre]

I have never tried the RM3 (also known as the A6). Here are some videos, which might help.

 

[Mufasa]

Thank you very much @Andre. I didn't know it was called the A6. No wonder I couldn't find any videos on the RM3 coil builds. I have been searching RM3 this weekend and nothing. I will definitely watch these videos.

 

[Andre]

http://www.ecigssa.co.za/reomizer-chart.t5648/

He now has a RM7 (Rogue) and RM8 (Derringer) too.

 

[Mufasa]

I just had a look as well. Those prices though!!

 

[Andre]

I just had a look as well. Those prices though!!

Oh, under no circumstances do you buy those from Reosmods. Way too expensive with shipping. Most of those atties you can find locally. @JakesSA from Vapeclub does bottom fed modding for us. See he has the Derringer in stock. If interested, send him a PM to ask for it to be modded to bf.
Another option is the Chalice III clone from @kimbo. See this thread: http://www.ecigssa.co.za/chalice-clone-comparison.t12491/
The more expensive (and of my favourites) are the Cyclone or Cyclone with AFC (Cyclops) from www.vapedecadence.co.za.

 

[Mufasa]

Thank you very much @Andre. I was just going to ask about BF atties locally and there you have all the answers.

 

[Keith Milton]

Tiger Wire Coil on RM3 ( Build at 0.2 ohms 4 Wraps )

Flat Ribbon Coil on RM3 ( Flavour Build at 0.22 ohm 4 Wraps )

 

[Mufasa]

@Keith Milton you are not fooling around with those Ohms!! I have to get some flat ribbon kanthal as I see quite a few of you using it. Will make a plan. May I ask what batteries you are using?

 

[Mufasa]

I just noticed the time you posted. No wonder you can't sleep

 

[Keith Milton]

@Keith Milton you are not fooling around with those Ohms!! I have to get some flat ribbon kanthal as I see quite a few of you using it. Will make a plan. May I ask what batteries you are using?

Samsung Smurfs and Sony VTC4's and Efest 2800mah 35A

 

[SAVapeGear]

Hi All

Have any of you guys used a RM4 on your Reo's yet?

Any feedback,I think it is basically a bottom fed Atomic.

Looks like it will sit nice an flush on a LP Reo Grand.......

 

[DoubleD]

Hi All

Have any of you guys used a RM4 on your Reo's yet?

Any feedback,I think it is basically a bottom fed Atomic.

Looks like it will sit nice an flush on a LP Reo Grand.......

Yes and I love mine to bits. Looks fantastic on the Reo.

Yes it is a BF Atomic

 

[Spydro]

I have an RM3 that is still new/never used. But also have another one and an A6 that I did use. They were OK if drilled out for DLH's, but I simply moved on to better gear soon after I got them.

 

[KB_314]

Hi All

Have any of you guys used a RM4 on your Reo's yet?

Any feedback,I think it is basically a bottom fed Atomic.

Looks like it will sit nice an flush on a LP Reo Grand.......

I once bought a Grand off the classifieds and an old BF Atomic (clone, I imagine) was thrown in. I heard it was a good flavor-chasing RDA. Tried it once, didn't really like it, and it's been in the black box ever since. If you want to try one, let me know and I will donate it to your cause.

 

[Spydro]

I once bought a Grand off the classifieds and an old BF Atomic (clone, I imagine) was thrown in. I heard it was a good flavor-chasing RDA. Tried it once, didn't really like it, and it's been in the black box ever since. If you want to try one, let me know and I will donate it to your cause.

I have an authentic Atomic. Old school ugly, but I found some great favor builds for it back when I still used it sometimes.

 

[SAVapeGear]

I once bought a Grand off the classifieds and an old BF Atomic (clone, I imagine) was thrown in. I heard it was a good flavor-chasing RDA. Tried it once, didn't really like it, and it's been in the black box ever since. If you want to try one, let me know and I will donate it to your cause.

Thanks @KB_314

This was an very old post,before I discovered the OL16s. But thanks for the kind gesture

 

[KB_314]

I have an authentic Atomic. Old school ugly, but I found some great favor builds for it back when I still used it sometimes.

"old school ugly" made me laugh. Good thread title too. Not to derail but I have to ask - @Spydro what is the single ugliest bit of vape gear you've ever purchased?

 

[KB_314]

Thanks @KB_314

This was an very old post,before I discovered the OL16s. But thanks for the kind gesture

Makes much more sense now The thread must have been revived recently

 

[Spydro]

"old school ugly" made me laugh. Good thread title too. Not to derail but I have to ask - @Spydro what is the single ugliest bit of vape gear you've ever purchased?

For atomizers I guess it would be a toss up between a couple of designs.

My dumbest buy of a dumb idea very early on in my vaping was a dual carto adapter. I learned from the start that I hated cartos, always have, always will, so why I bought it remains a mystery. This adapter used two cartos that allowed you have twice as much joose available between refills, or the ability to use two different e liquids that would blend together when you vaped. A lazy mans DIY device I guess.



Back in my tube mod days (especially the ProVari days), the atty's that made tube mods look like a long ICBM (missile), especially with long slender DT's. I used several tanks and drippers that fitted that description on them. I even tried to cut back on the long missile look by using stubby DT's and running them on my shorter ProVari's. An example is a Greek By Leo Baron Dripper Pro made just for the ProVari's. They also made a Slime Tank Pro for them that used either glass or SS steel tank tubes.

 

[KB_314]

For atomizers I guess it would be a toss up between a couple of designs.

My dumbest buy of a dumb idea very early on in my vaping was a dual carto adapter. I learned from the start that I hated cartos, always have, always will, so why I bought it remains a mystery. This adapter used two cartos that allowed you have twice as much joose available between refills, or the ability to use two different e liquids that would blend together when you vaped. A lazy mans DIY device I guess.

View attachment 92142

Back in my tube mod days (especially the ProVari days), the atty's that made tube mods look like a long ICBM (missile), especially with long slender DT's. I used several tanks and drippers that fitted that description on them. I even tried to cut back on the long missile look by using stubby DT's and running them on my shorter ProVari's. An example is a Greek By Leo Baron Dripper Pro made just for the ProVari's. They also made a Slime Tank Pro for them that used either glass or SS steel tank tubes.

View attachment 92143 View attachment 92144 View attachment 92145

Yep - those are not the prettiest. The dual carto adaptor is very special indeed and imo edges out the Provari setups Thanks for sharing!