Hi folks
Been following the forum for a while now, but here goes my first post.
I have been vaping for around a year now. Started with a twisp, and got a Kangertech Kbox mini kit around 4 months ago. Have bought various juices from various vendors and was happy with my vaping. A tank (5ml) lasted my around a day.
I initially started with 12mg nic in the Kbox, then steadily dropped the nic content (9 then 6). I am now on 3mg. But my shift to 3mg has caused a problem, my tank is drinking juice like a 68 Mustang (I am now sitting on between 10 to 15ml per day).
I was initially blaming the VG/PG % mixture of the juice as the culprit, my first batch of 3mg was a 50/50 mix, and to my mind a thinner juice. I have subsequently acquired various ratios of 3mg juice (70/30 and 80/20), but this has not solved the consumption problem.
So…
Below are a couple of scenarios which could be the problem/solution, please comment and give an opinion around this matter, its something thats spoiling my vaping pleasure.
1: A bad batch of coils… Gave a friend one of my coils, and he is convinced that my set of coils use more juice. Its standard Kangertech OCC 0.5ohm coils. I have used 4 of them, and he has used 1 (all from the same box/purchase).
2: The obvious culprit is the mg nic in the juice. But I reckon that my body would be used to the 3mg as opposed to the 6mg by now. Been on the 3mg for around 2 weeks now, but no consumption improvement. You might say that I should go back to 6mg, but I am hesitant to. My mail goal is to be on 0mg, want to get rid of nic addiction completely.
3: The wattage that I am vaping at? Been using the Kanger on 27W from day 1, so doubt thats the issue
4: I have tried making the breather holes smaller, seems to give me more satisfaction (simulating a better throught hit). My thoughts were that if I get a better hit, with a quicker drag, then I would use less juice.
5: I have no other thoughts/opinions/solutions/suggestions, this is where you hopefully come in, any ideas?
Been following the forum for a while now, but here goes my first post.
I have been vaping for around a year now. Started with a twisp, and got a Kangertech Kbox mini kit around 4 months ago. Have bought various juices from various vendors and was happy with my vaping. A tank (5ml) lasted my around a day.
I initially started with 12mg nic in the Kbox, then steadily dropped the nic content (9 then 6). I am now on 3mg. But my shift to 3mg has caused a problem, my tank is drinking juice like a 68 Mustang (I am now sitting on between 10 to 15ml per day).
I was initially blaming the VG/PG % mixture of the juice as the culprit, my first batch of 3mg was a 50/50 mix, and to my mind a thinner juice. I have subsequently acquired various ratios of 3mg juice (70/30 and 80/20), but this has not solved the consumption problem.
So…
Below are a couple of scenarios which could be the problem/solution, please comment and give an opinion around this matter, its something thats spoiling my vaping pleasure.
1: A bad batch of coils… Gave a friend one of my coils, and he is convinced that my set of coils use more juice. Its standard Kangertech OCC 0.5ohm coils. I have used 4 of them, and he has used 1 (all from the same box/purchase).
2: The obvious culprit is the mg nic in the juice. But I reckon that my body would be used to the 3mg as opposed to the 6mg by now. Been on the 3mg for around 2 weeks now, but no consumption improvement. You might say that I should go back to 6mg, but I am hesitant to. My mail goal is to be on 0mg, want to get rid of nic addiction completely.
3: The wattage that I am vaping at? Been using the Kanger on 27W from day 1, so doubt thats the issue
4: I have tried making the breather holes smaller, seems to give me more satisfaction (simulating a better throught hit). My thoughts were that if I get a better hit, with a quicker drag, then I would use less juice.
5: I have no other thoughts/opinions/solutions/suggestions, this is where you hopefully come in, any ideas?
