Having almost every previous version of the Berserkers I knew I had to try out the NEW B3 MTL RTA from Vandy Vape. Thanks out to Joyi from Sourcemore for sending this out for review.
Vandy Vape Berserker V3 (BSKR V3) MTL RTA 24mm 2ml/6ml
Vandy Vape B3 MTL RTA has 2ml/6ml capacity, 3 MTL driptips. It features new base design, convenient filling system, you can charge airflow without disassembling the device.
A collaboration between Vandy Vapes, and [Alex from Vapers MD](https://www.youtube.com/user/vapersmd), promised improvements, and enhancements to the previous v.2 design. It may be the v.3, but we're just going to call it the B3.
**From the MFG
*Check out the Vandy Vape B3 MTL 24mm RTA, featuring a 3mL tank capacity, dual post build deck, and swappable airflow pins for a satisfying vape experience. Constructed from durable stainless steel, the superior chassis construction is sleek and visually striking. Holding up to 3mL of eJuice within the confines of the tank glass, the B3 MTL RTA can accommdate a single coil configuration on the dual post build deck. Utilizing swappable airflow pins, the B3 RTA can change the rate of intaken airflow to create the best vaping set up for those that love MTL vaping. Refillable via top fill system, the B3 MTL RTA features two large fill ports to ensure the coils and cotton remain soaked in your favorite eJuice.
> Four airflow inserts come in the box: 0.8mm, 1.2mm, 1.4mm, and 2.0mm. This is a nice range of MTL draws; a very tight MTL draw with the 0.8mm insert, a tight MTL draw with the 1.2mm insert, a medium MTL draw with the 1.4mm insert, and a loose MTL draw with the 2.0mm insert.
**Vandy Vape B3 MTL RTA Features
** 24mm Diameter
* 3mL Tank Capacity
* Pyrex Glass Reinforcement
* Quarter Turn Top Fill System - Dual Fill Ports
* Stainless Steel Tank Construction
* Dual Post Build Deck -
* Top Secured via Allen Screw
* Single Coil Configuration
* Swappable Airflow Pin
* 510 Drip Tip
* Threaded 510 Connection
* Available in Black, Gunmetal, and Stainless Steel
**Includes
** 1 B3 MTL RTA
* 2 Drip Tip
* 2 0.74ohm Superfine MTL Fused Clapton Coil
* 2 PEI Tube
* 1 Glass Tube
* 3 Airflow Pipe
* 1 Accessory Bag
* 1 Instructional Manual
Some things familiar with the previous version, and a couple of new changes and enhancements ...
One of the things that didn't change was the outstanding packaging from Vandy Vape ...
Talk about OPTIONS, VV included (4) Tank sections, 3 drip tips, and 4 airflow pins ..
And there's MORE !!!! Chimney extension, loads of o-rings, screws, allen key, micro fine MTL coils, and user manual ....
You don't see THREE drip tips included very often ...
Another look at the stock (installed) 2ml tank, extension, and the 6ml extra tank section ...
Everything you would ever need to rebuild, repair, and keep on MTL'ing .....
A closeup of the extra PEI and glass tanks ....
A SUPER zoomed in shot to show the I.D. of the air flow pins ...
Clearly marked for your vaping pleasure ...
The B3 had an almost "Stealth" look to it (at least in flat black that is) .....
Even in flat black, the "B" logo was visible, along with the rectangular air inlet ports (one on each side), and the very smartly done knurling on the top and bottom caps ....
After a full cleaning before testing, the core components showcased a very well engineered MTL RTA ....
The non-descript top cap was o-ring-less, but that didn't matter, as each drip tip had 2 o-rings installed, and provided a snug, hassle free experience ....
Within a quarter turn the top cap was off, and clearly gasket-ed for no leaking ....
The top filling ring showed dual, large kidney filling ports ....
With top filling ring, and the glass section removed, the top of the tank revealed an interesting 6 port juice flow array, along with the threaded receiver for the chimney ...
Flipping the tank over revealed a pancake styled domed interior, which looked like it would EXCEL at compressing all of that flavor down to a saturation point, right before it's exit .....
Saving the build deck for last, moving to the bottom cap showcased the bottom of the in use air pin, which also doubled as the 510 connection ....
With all of the o-rings installed into the bottom cap / air pin receiver, the pins were held snugly in place, and were easy to remove/re-insert, even WHILE the tank was FULL !!!!!
Another shot for perspective, and closeup of the air flow port (one on each side) ....
Onto the deck. Fairly spacious coil ports, and build deck for easy building ....
Dual, side oriented juice flow ports ....
After easily sliding off the keyed deck ring (nicely double o-ringed), the building could commence ...
(2) Ni80 Super Fine MTL coils were included, and spec'd to 0.74 ohms ...
I decided to leave in, and test the installed grubs and allen key, and great news, grippy grippy, no strippie .....
With the deck ring removed, coil insertion, manipulation, and trimming couldn't have been easier. Notice the puzzle piece keying on the left of the deck, so the deck ring could be re-inserted correctly, and the wick tail / juice wells ....
