Vape porn - coil builds

[Keith Milton]

The clapton takes way longer to heat up but I think produces a little more flavour than a standard microcoil

It all depends on the gauge of wire being used, i usually use the 28g claptoned with 30g, and the ramp up time is not too bad, and the flavour is awesome, as it has more juice channels and wicks like a wet dream.

 

[Average vapor Joe]

@Keith Milton , @Average vapor Joe , @n0ugh7_zw - and all the other experienced coilers

What is the difference in taste and experience between a Clapton and a "normal" coil?

I am talking about normal power mode vaping, not temp control

I have not vaped on a Clapton hence I am interested in your replies from your experiences...

Ok here's my view on the fused Clapton. The flavour on it is just rediculous so much so that it will let you taste every single part of the your juice. The ramp up is not so long if you parallel it with a single strand of whatever internal you have. 4.2 volts is actually too hot for me at 0.22 ohms. Try it and enjoy it. I'm not so sure about the normal Clapton tho. I didn't see that much of an improvement.

 

[n0ugh7_zw]

@Silver TBH, these fancy coils, tend to only really be earth shatteringly good on a mech, in my experience. On a regulated mod, a regular Macro coil. Say 24G Kanthal A1 6 Wraps per coil around a 3.5mm bit, and you run that at 55-65W depending on the airflow you have available to you, and the vape will be orgasmic.

 

[Average vapor Joe]

@Silver TBH, these fancy coils, tend to only really be earth shatteringly good on a mech, in my experience. On a regulated mod, a regular Macro coil. Say 24G Kanthal A1 6 Wraps per coil around a 3.5mm bit, and you run that at 55-65W depending on the airflow you have available to you, and the vape will be orgasmic.

Why on a mech tho. My ipv3 li has an extremely low button delay and so does my rDNA 40 I can push just about as many watts as I want?????

 

[n0ugh7_zw]

Well a 26g core and 32g shell. Works great on a mech.

I find for me I get 99% of the performance of a fancy build from my simple 24g build on regulated mods.

Sent from my SM-N910F using Tapatalk

 

[Average vapor Joe]

Well a 26g core and 32g shell. Works great on a mech.

I find for me I get 99% of the performance of a fancy build from my simple 24g build on regulated mods.

Sent from my SM-N910F using Tapatalk

Weird to say the least. I mean when I tried my fused Clapton for the first time I was like "dang flabbit this is the future mate" I don't even use some flavours on it as it breaks them down to the every single component. You should try to parallel it with 24 gauge makes a huge difference

 

[n0ugh7_zw]

Weird to say the least. I mean when I tried my fused Clapton for the first time I was like "dang flabbit this is the future mate" I don't even use some flavours on it as it breaks them down to the every single component. You should try to parallel it with 24 gauge makes a huge difference

My pallet is pretty different to most, from what I've picked up. Hence I put in the disclaimer "In my experience"

 

[Average vapor Joe]

My pallet is pretty different to most, from what I've picked up. Hence I put in the disclaimer "In my experience"

Hehe respect man... To each their own right. Good luck with the coils and keep on vaping

 

[Silver]

@Silver TBH, these fancy coils, tend to only really be earth shatteringly good on a mech, in my experience. On a regulated mod, a regular Macro coil. Say 24G Kanthal A1 6 Wraps per coil around a 3.5mm bit, and you run that at 55-65W depending on the airflow you have available to you, and the vape will be orgasmic.

Thanks @n0ugh7_zw
I have been meaning to pull out my "coat hanger wire" and get down low on the ohms and high on the power. I have a lonely Doge V2 that is sitting quietly in the corner. It looks at me each time i do my usual pitstops. Will let you know how it goes... I feel a Silver in my path though...

 

[n0ugh7_zw]

Thanks @n0ugh7_zw
I have been meaning to pull out my "coat hanger wire" and get down low on the ohms and high on the power. I have a lonely Doge V2 that is sitting quietly in the corner. It looks at me each time i do my usual pitstops. Will let you know how it goes... I feel a Silver in my path though...

My advice would be drop down to a 6mg or even better a 3mg max vg juice. makes it so much smoother and luxurious

 

[zadiac]

Thanks @n0ugh7_zw
I have been meaning to pull out my "coat hanger wire" and get down low on the ohms and high on the power. I have a lonely Doge V2 that is sitting quietly in the corner. It looks at me each time i do my usual pitstops. Will let you know how it goes... I feel a Silver in my path though...

You're gonna have to drop your nic if you attempt sub ohm builds mate, or you'll live up to your name in no time....hahaha

 

[Zenooph]

My first fused Clapton

32g around 2 x 28g
8 wraps
1.5 ID
0.47ohm

Sent from my mind

 

[moonunit]

Very nice!


Sent from my iPhone using Tapatalk

 

[BumbleBee]

My first fused Clapton

32g around 2 x 28g
8 wraps
1.5 ID
0.47ohm

Sent from my mind

Awesome

 

[Andre]

My first fused Clapton

32g around 2 x 28g
8 wraps
1.5 ID
0.47ohm

Sent from my mind

Wow. That is probably the smallest ID Clapton I have seen. Beautifully done. Not many coils beat the glow of a Clapton. How do you find the vape?

 

[Zenooph]

Thanks @Andre the vape is quite cool, huge clouds, but I expected more flavour. I don't think it's heating up fast enough. I want to get some nichrome to use as the core to shorten the ramp up time

Sent from my mind

 

[Andre]

Thanks @Andre the vape is quite cool, huge clouds, but I expected more flavour. I don't think it's heating up fast enough. I want to get some nichrome to use as the core to shorten the ramp up time

Sent from my mind

I have a 10 m spool of 26 g Zivipf.de nichrome if that is what you might need and want? Just PM me your names and postal address with cell number and shall put it in the post.
Lol, got this in October 2013 and has never been used and will never be. Any excuse to make the drawer more neat.

 

[Zenooph]

Thanks a million.

Sent from my mind

 

[Silver]

You're gonna have to drop your nic if you attempt sub ohm builds mate, or you'll live up to your name in no time....hahaha

Lol @zadiac
I been vaping sub ohm on 18 mg for a long time.
Maybe not below 0,5 single but around 0.8 and 0.7 single many times and about 0.4 dual. Nuppin smoothes it out nicely (-)

 

[Zenooph]

Not my best work but not bad for a first try of a stapled Clapton

Sent from my mind

 

[Average vapor Joe]

Cotton bacon is absolutely amazing. At first I was skeptical about the advertised high temp burning. But I am totally convinced
"I didn't even get a dry hit at this point, just a weird taste that signals re-juicing"

 

[kev mac]

View attachment 32111

Nice work@average vaper Joe,claptons definitely deliver the flavor.

 

[kev mac]

Not my best work but not bad for a first try of a stapled Clapton

Sent from my mind

Not too shabby

 

[Waltervh]

Not sure if this was done before.
Duel Clapton 32 on 26 .17 on Billow v2
Max out my M80 to 80Watts
Lots of vapour and very warm

 

[ET]

Dual clapton Nomness. Nice dude