hmm , atomic/magma or stillare for the reo mini ?
Vapeclub - Free Reo Modifications On All Rdas
- Thread starter JakesSA
- Start date
I also need to know, any advice please.. urgent!!
I did look at the size of the magma on my mini, and it fits fine. But the button top for fire button has to go.
These are also questions I'm asking myself
I'm not too keen on the stillare as it doesn't have a air hole opening for single coil mode. So if u have a single coil in, it's gonna have both air holes open.
+1 on the advice needed!
Wait, why does the button have to go?
These are also questions I'm asking myself
I'm not too keen on the stillare as it doesn't have a air hole opening for single coil mode. So if u have a single coil in, it's gonna have both air holes open.
+1 on the advice needed!
Wait, why does the button have to go?
The magma on the mini is too close to the firing switch, at least with the aluminum button cover on. If you remove the cover it's not a problem.
The one with the smallest diameter imo.
I think Atomic
I see. That sucks. Button covers look sexy!
I think we should have that coil building session at Vapeclub with @JakesSA so that way we can look at their RBAs and stock up on kanthal if we run out
I'm keen to get the atomic today, it fit's the mini perfectly, do you think it would compare favorably to the rm2 with regards to flavour.
The only times these bigger atomizers compare favourable for me is if you do dual coils. On single coils not much to beat the RM2. Maybe the Cyclone without AFC.
My ultimate on a Reo so far is the Cyclone with AFC (dual coils).
That said, have ordered a Plume Veil clone for its innovative air flows to try and mod for bottom feed.
I thought you were a single coil man!
OK will re-rig the Cyclops later with two coils... how many wraps (28g) suggested for each @Andre?
Thanks @Andre, I appreciate your thoughts on this. And I will definitely be getting a cyclone as soon as @JakesSA gets off his lazy butt
and brings them in. http://www.ecigssa.co.za/threads/cyclone-bf-and-afc.3878/
Ah, that is not so easy with the higher resistance you vape at. Mine comes out at 0.45, and is about 9 wraps per coil. You need to double your normal count of wraps per coil to get to your normal resistance. Maybe not that many as the heat up will be a tad slower with the duals and the vaping experience is such that you can maybe go a little lower in ohms. Difficult to advise you.....maybe try a 1.8 or 2.0 mm mandrel with about 10/11 wraps each? If still too high, try 27 g wire.I thought you were a single coil man!
OK will re-rig the Cyclops later with two coils... how many wraps (28g) suggested for each @Andre?
Roger that! Thanks! I will also try going lower because this is still a journey and what worked yesterday is not necessarily what is cooking today!
Here is the first pic, MAGMA at top Stillare at bottom right and Atomic bottom left.
Jakes from what I can see those holes are too high. dont think there will be any drainage happening. the other option on atomic is to drill through the insulator grommet
Sent from my GT-I9500 using Tapatalk HD
Sent from my GT-I9500 using Tapatalk HD
Yip, agree with @Cape vaping supplies, the juice holes on top are too high, should be right on the deck. Otherwise you juice does not drain and cooks in there.
Can do
I picked up my Atomic earlier and have just finished making a dual coil, juice feed is completely awesome on this one. And I don't think there is a big problem with regards to the drainage issue for now. The center post only has a hole through one side for now. But this seems to be more than adequate to saturate both coils. One of the advantages that became immediately evident for me with a high juice hole, was that the coils themselves are getting saturated from the instant you sqounk it. Rather than having the wick soak everything up from the base. I'll see how it goes and report back. If need be it wouldn't be a problem to drill another hole lower down on the deck.
Just to add to my experience so far, man this atomic kicks you in the balls with a dual coil @.45ohms. Flavour is out of this world. I was torn between getting the magma or the atomic for the mini, but the flavour seems about on par so far. My mate picked up the magma last night and we(actually just me) did the exact same setup on his magma. The smaller size of the atomic definitely looks better on the Reo mini. Now just have to wait for the AFC cyclone clones 
(actually just me) did the exact same setup on his magma. The smaller size of the atomic definitely looks better on the Reo mini. Now just have to wait for the AFC cyclone clones
Here is a picture of the Cyclone and how low the juice hole is on the center post.
Just to add to my experience so far, man this atomic kicks you in the balls with a dual coil @.45ohms. Flavour is out of this world. I was torn between getting the magma or the atomic for the mini, but the flavour seems about on par so far. My mate picked up the magma last night and we
Pics please
I want that drip tip !!!
Im torn I dunno if I need the cyclone afc or these modded rdas
Im torn I dunno if I need the cyclone afc or these modded rdas
That's a nice driptipAtomic Clone by Infinite (drip tip not included)
Thanks, it came with the copper/stainless Stingray X plus the hybrid adapter
Similar threads
