Hi Ecigssa members, In this review i take a look at the Galaxies MTL RDTA 2ml from Vapefly. The Galaxies MTL RDTA was supplied for the purpose of this review by Flora from Vapefly.
http://www.vapefly.net/galaxies-mtl-squonk-rdta/
Introduction
The first Vapefly tank i bought was the Vapefly Nicolas which i still use from time to time with the 0.6ohm coil for an airy 23W MTL vape. Since then i have seen them release a couple more tanks, RTA's, RDA'S and even RDTA's and although i haven't used any of them until recently i have followed their products and both seen and read some very favourable reviews yet i don't really hear about Vapefly being talked about much in general, they must be one of the most underrated manufacturers. Lately i have been lucky enough to be sent the Galaxies range of MTL products. After already taking a look at the Galaxies MTL RDA and Galaxies RTA here we have the latest in the range the Galaxies MTL RDTA. As ever with Vapefly MTL products it has a MTL airflow which can be adjusted to tailor to the exact airflow you prefer. It also has a leak proof top-fill system and comes with a BF pin so you can use your squonk bottle as an extension of the RDTA's capacity.
In the Box
Contents:
1 x Vapefly Galaxies MTL RDTA(2ml)
1 x Extra Glass Tube
1 x Extra Drip Tip
1 x T-piece tool
2 x Coil
1 x Cotton pad
1x BF Pin
1 x Manual
Spare Parts
Aesthetics
The Galaxies MTL RDTA came in sample packaging and i received the Stainless version, it's also available in Black, Blue and Rainbow. The RDTA is 22mm in diameter and quite short, so very small for an RDTA. The bottom section is a small glass tube which holds 2ml of liquid, through the glass a central pipe is visible that holds the bottom and top sections together and also has holes near the top for when using the RDTA with the BF pin. Three quarters of the tanks height is the elongated top-cap/sleeve which covers the airflow system and the deck before doming in shape to help with the flavour. The very top of the sleeve has heat-sinking fins which also had a nice aesthetic touch, on top sits a MTL 510 frosted drip tip. The sleeve has 6 airflow holes one side and 3 the other, there is also a constellation design. The base has etched branding and safety stamps, the pre-installed standard Gold plated 510 protrudes nicely. The Galaxies MTL RDTA is a very aesthetically pleasing tank and build quality is top notch.
Galaxies MTL RDTA Specs and Features:
Diameter: 22.2mm
Height without drip: 28.5mm
Coil: Single
Capacity: 2ml
360° surrounding airflow for top-notch flavor
Spring loaded top filling port for leakage proof
Unique anti-heat design
2ml glass tube for ample juice storage
Gold-plated BF pin
Thread: 510 thread
Colours: Stainless, Black, Blue, Rainbow
The Airflow
Vapefly have managed to come up with a genuine bottom and side (if you wish) airflow system with the Galaxies MTL RDTA. The bottom of the tank is your glass that holds 2ml of liquid then you have the deck as per normal with an RDTA but it's raised up allowing for an airflow system in-between the glass and deck so the air comes underneath the deck and up through the airflow outlet directly underneath your coil. There is a hole either side below the deck which allows the air to enter, it then comes up through the already mentioned airflow outlet underneath the coil but it also enter underneath both ramp sections which are an extension of your posts. There is a grub screw at an angle in each of these ramps, when these screws are tightened the air is blocked and you just get the already mentioned bottom airflow but undoing the screws introduces side airflow that hits the coil at an angle also skimming the top of your coil giving complete 360 degree coverage. The screws can be undone as far as you wish so you have control of the amount of air you want hitting the sides of the coil in comparison to the bottom airflow. The top-cap has 6 holes one side and 3 holes the other, there is a large hole, medium hole and small hole one side. The opposite side again has a large hole, medium and small hole but then has another small hole followed by another medium hole and finally a second large hole. The airflow combinations this gives you are, large hole open both sides, medium hole open both sides, small hole open both sides or large hole open just one side, medium hole open just one side and finally small hole open just one side. The combinations with outer airflow control and grub screws on the deck allows you to get the exact MTL airflow you desire from a very airy vape to super tight.
The Deck and Build
I have already described the airflow in relation to the deck so i will move on to the build. Your coil legs enter from the side of the posts and i found it very easy to just slot the legs in place and tighten down the grub screws from the top. Once your legs are fixed into position you can use a coiling rod to just manipulate your coil in the perfect position which is helped by the side airflow ramps which act as a guide. Wicking i find a breeze with RDTA's i cut the cotton 1.5cm either side of the coil then just push down through the wick holes so the ends just dangle at the top of the tank. There is also a valve on the deck but i will explain that in the next section.
Vapefly did send me some Firebolt cotton to try which i used to wick the RDTA and i have to say it makes wicking so much easier.
http://www.vapefly.net/firebolt-cotton/
Leakproof top-fill System
Once your build is done and coil primed, it's time to fill the tank. If you are using the Galaxies with the BF pin then there is nothing to stop you simply filling the tank with a few presses of your squonk bottle. There is a pipe in the centre of the tank that goes from the base to the deck with holes just below the deck so you don't squonk onto your build but simply use the squonk bottle as an extension of your capacity topping your tank up when it gets low. If you are using the standard pin or if like me you are using the BF pin but want to start with both a full tank and bottle then the Galaxies MTL RDTA has a leak proof top-fill system. On the deck there is a spring loaded valve, you simply push the nozzle of your juice bottle into the opening at the top of the valve and as you press down the valve opens and the tank fills, when you remove your nozzle the valve shuts.
My Experience using the Galaxies MTL RDTA
Wow sums it up, the airflow works great and those that believe you can't get great flavour from an RDTA have been proved wrong by Vapefly, i love my Berserker Mini but this edges it for flavour and so many airflow options. I used it with the BF pin and i am a fan of the concept of using a squonk bottle as an extension of your capacity as it means you don't need to carry a bottle of juice around with you to top up when out and about.
Conclusion
So much going on, a clever airflow system to give the Galaxies MTL RDTA genuine 360 degree air coverage which can be adjusted from a loose to a very tight draw, a leak proof valve top-fill system and also the capability to be used as a BF tank. We have a popular saying in Britain "Jack of all trades master of none", Vapefly has given that saying the bird and turned it into "Jack of all trades mastered them all".
Likes
Aesthetically pleasing
Very good build quality
Bottom or 360 degree airflow
Plenty airflow options
Loose to very tight draw
Great Flavour
BF pin included
Very easy build and wick
Leakproof top-fill system
Spare Glass
Cotton and coils included
Works with squonk device great
Dislikes
The reviewers nightmare as i want to put something in this section but i can't even think of anything petty to put.
I would once again like to thank Flora from Vapefly for supplying the Galaxies MTL RDTA for the purpose of this review.
http://www.vapefly.net/galaxies-mtl-squonk-rdta/
http://www.vapefly.net/galaxies-mtl-squonk-rdta/
Introduction
The first Vapefly tank i bought was the Vapefly Nicolas which i still use from time to time with the 0.6ohm coil for an airy 23W MTL vape. Since then i have seen them release a couple more tanks, RTA's, RDA'S and even RDTA's and although i haven't used any of them until recently i have followed their products and both seen and read some very favourable reviews yet i don't really hear about Vapefly being talked about much in general, they must be one of the most underrated manufacturers. Lately i have been lucky enough to be sent the Galaxies range of MTL products. After already taking a look at the Galaxies MTL RDA and Galaxies RTA here we have the latest in the range the Galaxies MTL RDTA. As ever with Vapefly MTL products it has a MTL airflow which can be adjusted to tailor to the exact airflow you prefer. It also has a leak proof top-fill system and comes with a BF pin so you can use your squonk bottle as an extension of the RDTA's capacity.
In the Box
Contents:
1 x Vapefly Galaxies MTL RDTA(2ml)
1 x Extra Glass Tube
1 x Extra Drip Tip
1 x T-piece tool
2 x Coil
1 x Cotton pad
1x BF Pin
1 x Manual
Spare Parts
Aesthetics
The Galaxies MTL RDTA came in sample packaging and i received the Stainless version, it's also available in Black, Blue and Rainbow. The RDTA is 22mm in diameter and quite short, so very small for an RDTA. The bottom section is a small glass tube which holds 2ml of liquid, through the glass a central pipe is visible that holds the bottom and top sections together and also has holes near the top for when using the RDTA with the BF pin. Three quarters of the tanks height is the elongated top-cap/sleeve which covers the airflow system and the deck before doming in shape to help with the flavour. The very top of the sleeve has heat-sinking fins which also had a nice aesthetic touch, on top sits a MTL 510 frosted drip tip. The sleeve has 6 airflow holes one side and 3 the other, there is also a constellation design. The base has etched branding and safety stamps, the pre-installed standard Gold plated 510 protrudes nicely. The Galaxies MTL RDTA is a very aesthetically pleasing tank and build quality is top notch.
Galaxies MTL RDTA Specs and Features:
Diameter: 22.2mm
Height without drip: 28.5mm
Coil: Single
Capacity: 2ml
360° surrounding airflow for top-notch flavor
Spring loaded top filling port for leakage proof
Unique anti-heat design
2ml glass tube for ample juice storage
Gold-plated BF pin
Thread: 510 thread
Colours: Stainless, Black, Blue, Rainbow
The Airflow
Vapefly have managed to come up with a genuine bottom and side (if you wish) airflow system with the Galaxies MTL RDTA. The bottom of the tank is your glass that holds 2ml of liquid then you have the deck as per normal with an RDTA but it's raised up allowing for an airflow system in-between the glass and deck so the air comes underneath the deck and up through the airflow outlet directly underneath your coil. There is a hole either side below the deck which allows the air to enter, it then comes up through the already mentioned airflow outlet underneath the coil but it also enter underneath both ramp sections which are an extension of your posts. There is a grub screw at an angle in each of these ramps, when these screws are tightened the air is blocked and you just get the already mentioned bottom airflow but undoing the screws introduces side airflow that hits the coil at an angle also skimming the top of your coil giving complete 360 degree coverage. The screws can be undone as far as you wish so you have control of the amount of air you want hitting the sides of the coil in comparison to the bottom airflow. The top-cap has 6 holes one side and 3 holes the other, there is a large hole, medium hole and small hole one side. The opposite side again has a large hole, medium and small hole but then has another small hole followed by another medium hole and finally a second large hole. The airflow combinations this gives you are, large hole open both sides, medium hole open both sides, small hole open both sides or large hole open just one side, medium hole open just one side and finally small hole open just one side. The combinations with outer airflow control and grub screws on the deck allows you to get the exact MTL airflow you desire from a very airy vape to super tight.
The Deck and Build
I have already described the airflow in relation to the deck so i will move on to the build. Your coil legs enter from the side of the posts and i found it very easy to just slot the legs in place and tighten down the grub screws from the top. Once your legs are fixed into position you can use a coiling rod to just manipulate your coil in the perfect position which is helped by the side airflow ramps which act as a guide. Wicking i find a breeze with RDTA's i cut the cotton 1.5cm either side of the coil then just push down through the wick holes so the ends just dangle at the top of the tank. There is also a valve on the deck but i will explain that in the next section.
Vapefly did send me some Firebolt cotton to try which i used to wick the RDTA and i have to say it makes wicking so much easier.
http://www.vapefly.net/firebolt-cotton/
Leakproof top-fill System
Once your build is done and coil primed, it's time to fill the tank. If you are using the Galaxies with the BF pin then there is nothing to stop you simply filling the tank with a few presses of your squonk bottle. There is a pipe in the centre of the tank that goes from the base to the deck with holes just below the deck so you don't squonk onto your build but simply use the squonk bottle as an extension of your capacity topping your tank up when it gets low. If you are using the standard pin or if like me you are using the BF pin but want to start with both a full tank and bottle then the Galaxies MTL RDTA has a leak proof top-fill system. On the deck there is a spring loaded valve, you simply push the nozzle of your juice bottle into the opening at the top of the valve and as you press down the valve opens and the tank fills, when you remove your nozzle the valve shuts.
My Experience using the Galaxies MTL RDTA
Wow sums it up, the airflow works great and those that believe you can't get great flavour from an RDTA have been proved wrong by Vapefly, i love my Berserker Mini but this edges it for flavour and so many airflow options. I used it with the BF pin and i am a fan of the concept of using a squonk bottle as an extension of your capacity as it means you don't need to carry a bottle of juice around with you to top up when out and about.
Conclusion
So much going on, a clever airflow system to give the Galaxies MTL RDTA genuine 360 degree air coverage which can be adjusted from a loose to a very tight draw, a leak proof valve top-fill system and also the capability to be used as a BF tank. We have a popular saying in Britain "Jack of all trades master of none", Vapefly has given that saying the bird and turned it into "Jack of all trades mastered them all".
Likes
Aesthetically pleasing
Very good build quality
Bottom or 360 degree airflow
Plenty airflow options
Loose to very tight draw
Great Flavour
BF pin included
Very easy build and wick
Leakproof top-fill system
Spare Glass
Cotton and coils included
Works with squonk device great
Dislikes
The reviewers nightmare as i want to put something in this section but i can't even think of anything petty to put.
I would once again like to thank Flora from Vapefly for supplying the Galaxies MTL RDTA for the purpose of this review.
http://www.vapefly.net/galaxies-mtl-squonk-rdta/
