What Do You Think Of This
- Thread starter Riaz
- Start date
My ohm meter from skyblue gives a static reading every time. always the same. The reader inside the svd sometimes gives different readings. NOt saying the svd is bad, but it does seem to vary virth about 0.1 ohm every 3rd reading or so.
i think i still want to go with a vv/vw mod that does ohm readings, even if it might be slighly less accurate. not that hardcore yet where i will want super accurate readings. as long as i know a coil will be around a certain ohmage all is good
what next? 
you could spend a bunch of bucks on one of these
or wait a few months until i make a bunch of them
you could spend a bunch of bucks on one of theseor wait a few months until i make a bunch of them
510 threaded base stand for displaying your carto's/rda's and also as a base to build coils on
Riaz - I have used my Vamo for quite a time to measure the resistance of coils. Did get the ohm meter from Skyblue recently so could compare - the Vamo is more than accurate enough for our purpose, but rounds it off to 1 decimal point, whilst the ohm meter gives 2 decimal points, e.g. 0.8 on the Vamo and 0.85 on the meter. Just make sure from Skyblue that the SLB can measure below 1 ohm. I know the Provari does not power below 1.2 ohms, but also does not measure below 1.2 ohms. I agree with Eviltoy that the ohm meter does provide a great base to build coils on, but is a nice to have not a necessity if you have a VV/VW device that can measure resistance. It is, however, a must to be able to measure resistance if you build your own coils.
Absolutely, and I hope we are getting there. Again, I think everyone will agree VV/VW devices are usually accurate enough for the purposes of the vast majority of vapers. When you go below around 0.4 ohms accuracy does become important, but chances are you will never play around there, and if you want to, you will then get an ohm meter. I have used an old cigarette snuffer for a long time as base - basically something with a hole in the middle for the connector to go in so your atty is stable.
LMIMC
i finally decided on an upgrade, and now its out of stock.
now i have to go back to the drawing boards.
which do u recommend eviltoy? how is the k100?
How does one become a "bra"? Seems some advantages there
!
always wanted to be a bra, get to snuggle boobies the entire day AND stay warm
always wanted to be a bra, get to snuggle boobies the entire day AND stay warm
LOL
nothing bru
so it turns out the wifey secretly bought me a brand spanking new EGO SLB.
i couldnt wait to get to work this morning to open it up and try it.
i my igo l is on its way from FT, so ill be using it with the protank in the mean while.
what VV and VW is safe to start with?
i couldnt wait to get to work this morning to open it up and try it.
i my igo l is on its way from FT, so ill be using it with the protank in the mean while.
what VV and VW is safe to start with?
Congrats, Riaz. You have the best wife! Remember, pictures or it did not happen. Have not vaped a VV/VW device for a long time, but think starting at about 5 Watts going to around 8 Watts should be ok.
. Have not vaped a VV/VW device for a long time, but think starting at about 5 Watts going to around 8 Watts should be ok.
Similar threads
