What squonker to get...

[Viper_SA]

When I got rid of my Reo collection I thought I was mostly done with squonking. Yesterday I ran into a situation where ALL my rta's were being pit stopped and I had to rely on pods and two mech squonkers. For a while now I have been thinking about getting a Pulse V2 (Obsidian Black), but tinkering with my Molly tonight has my mind headed to another mech maybe.... I already have a spare Recurve to run on it, and might just need a battery if its not 18650. What are your thoughts here? Pulse V2 or a mech? If a mech, what can I get that won't cost an arm and a leg? Let's see what pops up.

Thank you in advance. I know I'll get some expert advice here

 

[Halfdaft]

Yes, always yes… @vicTor can confirm

 

[Intuthu Kagesi]

I'm a little slow tonight .... How does a pit stop involving RTA's justify another mech squonk mod? ... hey, if you "need" another one buy it

 

[Viper_SA]

How does a pit stop involving RTA's justify another mech squonk mod?

All 11 of my rta's were out of commission and I only had pods and my two squonkers to vape on. Drippers are so much easier and quicker to pit stop. So there is that, and the fact that my arse is itching... but like I said, also been looking at the Pulse V2. Liking the bottom fill on it. Seems less messy.

 

[Intuthu Kagesi]

All 11 of my rta's were out of commission and I only had pods and my two squonkers to vape on. Drippers are so much easier and quicker to pit stop. So there is that, and the fact that my arse is itching... but like I said, also been looking at the Pulse V2. Liking the bottom fill on it. Seems less messy.

So the truth is your arse is itching for new "stuff" ... and that's kewl, I think most people on this forum understand that part well

 

[Timwis]

If Mech the BP Mods Bushido and Vandyvape Requiem are very good and affordable!

 

[zadiac]

When I got rid of my Reo collection I thought I was mostly done with squonking. Yesterday I ran into a situation where ALL my rta's were being pit stopped and I had to rely on pods and two mech squonkers. For a while now I have been thinking about getting a Pulse V2 (Obsidian Black), but tinkering with my Molly tonight has my mind headed to another mech maybe.... I already have a spare Recurve to run on it, and might just need a battery if its not 18650. What are your thoughts here? Pulse V2 or a mech? If a mech, what can I get that won't cost an arm and a leg? Let's see what pops up.

Thank you in advance. I know I'll get some expert advice here

You are the only that can answer that question.

 

[Adephi]

I'm a little slow tonight .... How does a pit stop involving RTA's justify another mech squonk mod? ... hey, if you "need" another one buy it

Because another squonk mod.

Yesterday I tripped over my kids lego's. My first thought was I need another squonk mod. Its one of those things that doesn't need explanation.

 

[Paul33]

my arse is itching

they make a cream for that you know…

 

[Viper_SA]

If Mech the BP Mods Bushido and Vandyvape Requiem are very good and affordable!

I've seen reviews on them, and the Bushido looks good, and the Requiem comes in some funky designs, but I think I'd prefer "plastic".

 

[Viper_SA]

they make a cream for that you know…

Hahaha, but seriously now, maybe I should update the thread title. Looking for recommendations here. First off between a Pulse V2 and a mech, and then a few mechs to look at.

@vicTor
@Paul33
@Christos

 

[Viper_SA]

Thread title updated and poll added

 

[vicTor]

Hahaha, but seriously now, maybe I should update the thread title. Looking for recommendations here. First off between a Pulse V2 and a mech, and then a few mechs to look at.

@vicTor
@Paul33
@Christos

I've heard good things about the Pulse V2 but you know me, will always choose a mech

I have a Requiem, solid mod but beware it's quite heavy for its size

what about a DMD mech squonk ?

 

[Paul33]

Hahaha, but seriously now, maybe I should update the thread title. Looking for recommendations here. First off between a Pulse V2 and a mech, and then a few mechs to look at.

@vicTor
@Paul33
@Christos

I've ordered and am waiting for a Pulse V2. I tried the mech route and whilst it's awesome it just wasn't for me. I like to vape relatively low wattage on a low ish build ( 24w on a 0.3ohm coil) which I couldnt get on a mech.

As soon as my V2 is in operation I will let you know but I reckon it will be perfect for what I need!

 

[Stranger]

https://www.afrivape.co.za/arctic-dolphin-crea-BF-squonk-box-mech-mod



Bullet proof and simple and affordable.

 

[Viper_SA]

I've heard good things about the Pulse V2 but you know me, will always choose a mech

I have a Requiem, solid mod but beware it's quite heavy for its size

what about a DMD mech squonk ?

Aren't those DMD"s quite expensive?

 

[Viper_SA]

https://www.afrivape.co.za/arctic-dolphin-crea-BF-squonk-box-mech-mod

View attachment 241767

Bullet proof and simple and affordable.

Will check out some reviews later when I have time, thanks

 

[Viper_SA]

I've ordered and am waiting for a Pulse V2. I tried the mech route and whilst it's awesome it just wasn't for me. I like to vape relatively low wattage on a low ish build ( 24w on a 0.3ohm coil) which I couldnt get on a mech.

As soon as my V2 is in operation I will let you know but I reckon it will be perfect for what I need!

Especially interested to know if you have issues with leaking on that bottom fill, and I've heard that some attys don't screw in far enough pushing out juice between the atty and the mod. Seeing as you're going to also be using a Recurve this would be great feedback for me as I also plan on running a Recurve

 

[vicTor]

Aren't those DMD"s quite expensive?

not sure of current pricing

 

[Stranger]

Exactly my combo, Crea and recurve dual.

 

[Paul33]

Especially interested to know if you have issues with leaking on that bottom fill, and I've heard that some attys don't screw in far enough pushing out juice between the atty and the mod. Seeing as you're going to also be using a Recurve this would be great feedback for me as I also plan on running a Recurve

for sure. I've only heard good things hence I spent my wifes money on one. I'll let you know once I get it going!

 

[YzeOne]

Especially interested to know if you have issues with leaking on that bottom fill, and I've heard that some attys don't screw in far enough pushing out juice between the atty and the mod. Seeing as you're going to also be using a Recurve this would be great feedback for me as I also plan on running a Recurve

I've noticed this with my Drop Dead & Coil Art RDA's - All other RDA's no issues (Pulse, BTFC, Dead Rabbit etc)

 

[YzeOne]

I have the VV Pulse Mech & the V2 95W. Also a Furyan & a Drone. The VV Pulse v2 95w is by far my favourite

 

[Paul33]

I have the VV Pulse Mech & the V2 95W. Also a Furyan & a Drone. The VV Pulse v2 95w is by far my favourite

well now the wait for my V2 just got looooooooooooooonnnnnnnnggggggeeeeeeeeeerrrrrrrrrr

 

[BioHAZarD]

Vandy Vape Pulse 2 ... I have 4 in rotation. Ranging from 30,000 to 115,000 puffs. Two for MTL and two for RDL.