Which BF RDA do you choose?

[Clouds4Days]

Reason i ask about the tsunami is because it is a more affordable alternative for someone wanting to get into squonking without blowing too much cash.

I have heard mixed reviews where it is said flavour is really good but there are problems of leaking because of it being bottom airflow.

But those chimneys stand really tall and i find myself thinking is it even possible to squonk so much that you flood the chimneys?

 

[Christos]

Reason i ask about the tsunami is because it is a more affordable alternative for someone wanting to get into squonking without blowing too much cash.

I have heard mixed reviews where it is said flavour is really good but there are problems of leaking because of it being bottom airflow.

But those chimneys stand really tall and i find myself thinking is it even possible to squonk so much that you flood the chimneys?

I have one if you want to buy it to try it
Flavour from an OL16 was better so I packed it away.
Oversquonking wasn't an issue because I had the glass window one bit bottom airflow really leaves lots of condensation on a mod.
Also for top notch flavor I ran it with dual SS fused claptons over 90W.

 

[Clouds4Days]

I have one if you want to buy it to try it
Flavour from an OL16 was better so I packed it away.
Oversquonking wasn't an issue because I had the glass window one bit bottom airflow really leaves lots of condensation on a mod.
Also for top notch flavor I ran it with dual SS fused claptons over 90W.

I had one which i orderd from gearbest but when it eventually arrived after 3 months i had no use for it.

Only reason i mention the Tsunami 24 on here is for other folk looking for a cheaper bf alternative.

If you could rate it here @Christos that would be awesome.

Flavour: x/10
Ease of build: x/10
Build quality: x/10

 

[Clouds4Days]

Back to square 1 peeps.
Please share your views.
Im looking at a Goon 22 or Petri v2 rda to run on a squonk mech mod.

The goon i can purchase a bf pin and the petri i will have to get if bf.
But that's no issue.

Which RDA do yous think?
Obviously its all about da flava but other RDA you can vouch for are welcome with open arms.

 

[incredible_hullk]

Back to square 1 peeps.
Please share your views.
Im looking at a Goon 22 or Petri v2 rda to run on a squonk mech mod.

The goon i can purchase a bf pin and the petri i will have to get if bf.
But that's no issue.

Which RDA do yous think?
Obviously its all about da flava but other RDA you can vouch for are welcome with open arms.

I have both bf goon and petri ... for flavour 22mm bf petri absolutely any day. Goon is awesome but I just find the petri better. Also depends what device - goon is suited for bigger builds and works wonderfully on a regulated high watts mod. For mech bfs I only use the petri tbh

 

[Clouds4Days]

I have both bf goon and petri ... for flavour 22mm bf petri absolutely any day. Goon is awesome but I just find the petri better. Also depends what device - goon is suited for bigger builds and works wonderfully on a regulated high watts mod. For mech bfs I only use the petri tbh

Now if you were to BF a petri does it come with 2 510 pins so if i were ever to use it again as a normal dripper i could?

 

[KB_314]

I have both bf goon and petri ... for flavour 22mm bf petri absolutely any day. Goon is awesome but I just find the petri better. Also depends what device - goon is suited for bigger builds and works wonderfully on a regulated high watts mod. For mech bfs I only use the petri tbh

@incredible_hullk did you use the off-the-shelf BF kit or did someone mod it?

 

[Petrus]

Back to square 1 peeps.
Please share your views.
Im looking at a Goon 22 or Petri v2 rda to run on a squonk mech mod.

The goon i can purchase a bf pin and the petri i will have to get if bf.
But that's no issue.

Which RDA do yous think?
Obviously its all about da flava but other RDA you can vouch for are welcome with open arms.

@Clouds4Days, there is a bf kit available for the Petri

 

[incredible_hullk]

@incredible_hullk did you use the off-the-shelf BF kit or did someone mod it?

One of each @Clouds4Days ... the off the shelf kit works like a dream ... and I'm not a diy person at all

 

[incredible_hullk]

Now if you were to BF a petri does it come with 2 510 pins so if i were ever to use it again as a normal dripper i could?

With the kit u can remove the inside base plate and put the old plate back in with the old pin and use a std rda again

 

[Blu_Marlin]

Yep you get a BF kit for the Petri V2. Did not know it existed until this post.

 

[Clouds4Days]

@Clouds4Days, there is a bf kit available for the Petri

Are these available locally?

 

[KB_314]

With the kit u can remove the inside base plate and put the old plate back in with the old pin and use a std rda again

I'm going to grab one I think. Also not a diy person

 

[KB_314]

Are these available locally?

Don't think so but they seem to be available from a couple of int stores
https://www.intaste.de/en/alliancetech-vapor-petri-v2-rda-bottom-feeder-squonker-kit.html

 

[incredible_hullk]

I'm going to grab one I think. Also not a diy person

I had one problem with mine @KB_314 ... the circle shape of the plate wasn't perfect but a Stanley blade did the trick and smoothed it out

 

[Clouds4Days]

Don't think so but they seem to be available from a couple of int stores
https://www.intaste.de/en/alliancetech-vapor-petri-v2-rda-bottom-feeder-squonker-kit.html

Damit... The wait... And €21 excl shipping

 

[incredible_hullk]

Damit... The wait... And €21 excl shipping

That's the only issue with intaste... shipping is insane

 

[KB_314]

Damit... The wait... And €21 excl shipping

Yep it's not very cost effective. So you have to buy other stuff
Not that it makes much difference, but when you register you will get the vat off and it becomes 17,56

 

[incredible_hullk]

Yep it's not very cost effective. So you have to buy other stuff
Not that it makes much difference, but when you register you will get the vat off and it becomes 17,56

@KB_314 how do u register for import/export ( I presume that's what u meant)

 

[KB_314]

@KB_314 how do u register for import/export ( I presume that's what u meant)

You just have to use a South African address and the site will deduct the vat automatically, so when logged in, you will see the reduced price only (but with a note saying that it excludes vat)

 

[Petrus]

@Clouds4Days, Intaste uses Fedex if I am not mistaken. I have ordered quite a lot from them in the past. Shipping is lightning fast.

 

[Christos]

Whay mod @Clouds4Days ?

 

[Clouds4Days]

Whay mod @Clouds4Days ?

Im not sure yet but either the P67 or Leppy. I will probably alternate between the two with my new RDA and the hadaly.

 

[Christos]

Im not sure yet but either the P67 or Leppy. I will probably alternate between the two with my new RDA and the hadaly.

You not using the snappy?

 

[Clouds4Days]

You not using the snappy?

Sold it today.
Its more aimed at Restrictes lung hits and i prefer DL.