Wismec Presa TC75W & TC100W

BumbleBee

Vaping Master
VIP
LV
52
 
Joined
18/5/14
Posts
9,880
Awards
42
Age
48
Location
Robertson
http://www.wismec.com/product/presa-tc75w/

I want this!

image.jpeg
Following the unique appearance of Presa, Presa TC75W is introduced with maximum 75W power output and brilliant temperature control system. The optional VW, Bypass, TC-Ni and TC-Ti mode will provide you with different vaping experiences. In addition to the replaceable cell and magnetic cover, the upgradeable firmware makes it always up to date.
 
Looks very nice. How is Wismec? I've seen their mods a lot but haven't really read up much or seen any reviews
 
Looks very nice. How is Wismec? I've seen their mods a lot but haven't really read up much or seen any reviews
I've been playing with the 40w Presa and thoroughly enjoying it. Solid little mod and oh so comfortable to use :)

This one has me quite excited, it's going to give the evic vtc a good run for its money considering the Wismec should be cheaper and Joyetech has a very uncertain future in this part of the world.
 
I'm a little surprised the Presa TC100W is getting such a little airtime... it's less than a grand and takes a 26650 or 18650 battery. I got mine a day ago and have pretty vaped on it since I got it to test how long the 26650 battery lasted... and even with it's first charge it did a full day's constant vaping on a Gemini cCell at 30 watts. It's comfortable (more comfortable than most mods) and just squeezing the mod and not worrying about your finger finding the fire button is a new experience which I didn't think I would like but do.

The 26650 is charging so I popped an 18650 into the battery sleeve and off I go again. I wasn't sure this mod would remain in the family but after today I went in search of some branded 26650's... found a selection at www.vaporize.co.za and while I was there discovered a local source of 14500 batteries which are as scarce as hen's teeth... I use them in my Brass REO mini's.

But I digress... the screen is good and there is a lot more info on the screen than most mods... puff counter, resistance, voltage etc but the one display I really like is the amperage being used when the fire button is pressed. Can I mention the comfort again? As much as I love my Snow Wolf Mini's the sharpish edges start to hurt a little when you have been clutching your mod in your paw for some time... the Presa is mega comfortable and you can keep it in the hand all day! It also isn't very heavy either even with the 26650 battery installed!

Something else is the 510 top can handle a 30mm atty with no overhang!

All in all this is a great device and recommended and considered a poultry supper! :b1:
Presa 001.JPG
 
I'm a little surprised the Presa TC100W is getting such a little airtime... it's less than a grand and takes a 26650 or 18650 battery. I got mine a day ago and have pretty vaped on it since I got it to test how long the 26650 battery lasted... and even with it's first charge it did a full day's constant vaping on a Gemini cCell at 30 watts. It's comfortable (more comfortable than most mods) and just squeezing the mod and not worrying about your finger finding the fire button is a new experience which I didn't think I would like but do.

The 26650 is charging so I popped an 18650 into the battery sleeve and off I go again. I wasn't sure this mod would remain in the family but after today I went in search of some branded 26650's... found a selection at www.vaporize.co.za and while I was there discovered a local source of 14500 batteries which are as scarce as hen's teeth... I use them in my Brass REO mini's.

But I digress... the screen is good and there is a lot more info on the screen than most mods... puff counter, resistance, voltage etc but the one display I really like is the amperage being used when the fire button is pressed. Can I mention the comfort again? As much as I love my Snow Wolf Mini's the sharpish edges start to hurt a little when you have been clutching your mod in your paw for some time... the Presa is mega comfortable and you can keep it in the hand all day! It also isn't very heavy either even with the 26650 battery installed!

Something else is the 510 top can handle a 30mm atty with no overhang!

All in all this is a great device and recommended and considered a poultry supper! :b1:
View attachment 51213
I used a 40W presa for a bit, the firing action is just brilliant and so comfortable to use, I loved not having to hunt for the fire button :)

How does the paint finish look on the 100W? Is it a chippy spray paint finish like the Kanger KBoxes or more pearly glossy like the VTC Minis?
 
I used a 40W presa for a bit, the firing action is just brilliant and so comfortable to use, I loved not having to hunt for the fire button :)

How does the paint finish look on the 100W? Is it a chippy spray paint finish like the Kanger KBoxes or more pearly glossy like the VTC Minis?

It's pearly... and about a hundred times better than a Subtank paint job!
 
It's pearly... and about a hundred times better than a Subtank paint job!
Aw yeah! Makes me want one even more now, if the paint is anything like the Pearl White VTC mini then it will definitely be going on my wanted list. :deal:
 
Thanks for the feedback @Rob Fisher
This sounds great
I like the idea of the 26650 and that it has a puff counter!

How much taller is it than the snow wolf mini?
 
I must say this is fast becoming one of my most favourite mods... so so comfortable and 26650! Also the Gemini cCell Tank my most favorite as well because top fill, juice flow and the cCell coil!
Presa 002.JPG
 
Great thread Guys... :inlove:
Needless to say, just got mine last night and I'm looking thru' some reviews. Well done Rob Fisher for the info. Been using mine all morning and it feels like a rock-solid mod. I'm using in Power Mode for now with an 18650, so I appreciate the info on where to get 26650... 8--)
Funny thing is, I didn't want to use my Goblin Mini coz I was worried about scratching the top of the mod. I decided to pop on the Melo III that came with the iStick Pico 75w (The Pico gets the Goblin Mini since has nice stainless steel top).
Bottom line: I am totally impressed with feel, weight, finish, settings, performance, and I'm looking forward to checking out the TC side later. Also going to try a few other tanks however, I'm inclined to want to stick with a smaller/shorter tank.
Yes you do! :D
 
Presa is a winner. Got mine last Saturday from Sirs.... What an awesome device. Has all the bells and whistles of your readily available mods, but running a single 26650:eek:......

Also had about a days vaping at 50w. Feels nyc in the hand i must say....

This mod is a keeper;)

20160409_173553.jpg
 
What colours do they come in

Sent from my SM-G935F using Tapatalk
 
Is this better than a rolo especially with a 26650 bat seeing that I'll never vaped at higher than 75w????

Sent from my SM-G935F using Tapatalk
 
Is this better than a rolo especially with a 26650 bat seeing that I'll never vaped at higher than 75w????

Sent from my SM-G935F using Tapatalk
@kyle_redbull Let me just say that my RX200 has been replaced... Browse the forum for pics showing an RX200 in someone's hand and compare it with the pic by @Ugi above, and remeber it'll be above 2x the weight of the Presa (with 18650, giving max 75w)
 
@kyle_redbull Let me just say that my RX200 has been replaced... Browse the forum for pics showing an RX200 in someone's hand and compare it with the pic by @Ugi above, and remeber it'll be above 2x the weight of the Presa (with 18650, giving max 75w)
Thanks bud does the firing system feel cheap like after extended use that it could break versus a button? I am usually out and about when I work and never stationary just worried that due to the bulkiness of the Rolo that my EDC will be my istick???

Sent from my SM-G935F using Tapatalk
 
I don't do insane coil builds or anything so I just feel the rx200 is a overkill

Sent from my SM-G935F using Tapatalk
 
I've been using it all day and I love it.
Feels solid, as I said earlier... It has a slide lock/unlock button above the firing trigger/lever and seems pretty well designed IMHO
 
I've been using it all day and I love it.
Feels solid, as I said earlier... It has a slide lock/unlock button above the firing trigger/lever and seems pretty well designed IMHO
Thanks bud for the help @Rob Fisher any comment on the firing trigger or lever?

Sent from my SM-G935F using Tapatalk
 
Back
Top