You just need any metal base that has a slight bump in the center to make contact with the battery..
Wooden Box mod
- Thread starter Rellik
- Start date
You just need any metal base that has a slight bump in the center to make contact with the battery..
Yeah, but everyone is safety cautious about what size wire and the connectors , switches etc, to ensure that nothing overheats or burns. I don't want something as small as a little piece of contact to be the weakest link in the safety of the mod, if you understand what I mean.
I am hoping to be able to build 0.6 - 0.8 ohm coils on the mod, without sacrificing body parts
Lol.. yeah I'm running a 1 - 1.2 ohm coil at the moment in the wood box. My Reo has the 0.6 ohm. The thing with some communica's switches is, they are 2 to 3 amps. However, it's only momentary. But I wouldn't push it to much...
Ok, so I have received just about all my goods. So I'm gonna resurrect this thread again.
Hardware Items bought thus far:
Wood - Some samples from Rarewoods - Western Red, Boire and Burmese Teak
Vapour Mountain - Reo Spring, Reo door magnets
Fat Daddy Vapes - 510 V3 V3 Woo, 22mm Washer, (Also bought a 510BF Wood & BF Bottle attachment for a later mod )
Communica - Vandal proof S/S finish button
I have done 2 designs (Concept ideas, hopefully the woodwork part works.....) On the attached designs, I am comparing the 2 designs to a Hana, as everyone has a good idea of the size of the Hana). I would like some input as to which form factor you guys think will work better.....
Width Comparison
And a height comparison
Hardware Items bought thus far:
Wood - Some samples from Rarewoods - Western Red, Boire and Burmese Teak
Vapour Mountain - Reo Spring, Reo door magnets
Fat Daddy Vapes - 510 V3 V3 Woo, 22mm Washer, (Also bought a 510BF Wood & BF Bottle attachment for a later mod
)Communica - Vandal proof S/S finish button
I have done 2 designs (Concept ideas, hopefully the woodwork part works.....) On the attached designs, I am comparing the 2 designs to a Hana, as everyone has a good idea of the size of the Hana). I would like some input as to which form factor you guys think will work better.....
Width Comparison
And a height comparison
What amps can that switch handle? You should be careful with that.
From what I understand, I will need to put a mosfet on there to protect the switch, still need to go buy that at Communica.
Yeah, you're right. Or make it full mechanical, then you won't need a mosfet
Have a look at this video:
Have a look at this video:
Yeah, you're right. Or make it full mechanical, then you won't need a mosfet
Have a look at this video:
I thought about that yes, but the button is so pwetty!!!
great stuff @Rellik seems you have it all going now. Cant wait to see you end result.Ok, so I have received just about all my goods. So I'm gonna resurrect this thread again.
Hardware Items bought thus far:
Wood - Some samples from Rarewoods - Western Red, Boire and Burmese Teak
Vapour Mountain - Reo Spring, Reo door magnets
Fat Daddy Vapes - 510 V3 V3 Woo, 22mm Washer, (Also bought a 510BF Wood & BF Bottle attachment for a later mod
Communica - Vandal proof S/S finish button
I have done 2 designs (Concept ideas, hopefully the woodwork part works.....) On the attached designs, I am comparing the 2 designs to a Hana, as everyone has a good idea of the size of the Hana). I would like some input as to which form factor you guys think will work better.....
Width Comparison
View attachment 19320
And a height comparison
View attachment 19322
Definitely need a mosfet (3034) and 15k resistor possibly for the switch its only a 3a switch. Those numbers are from memory resistor not that important though as it doesn't have to be exactly 15k.
Yeah, I agree. The one that the guy in the vid I posted use, is the right one. You can buy them locally too. About R38 each.
http://za.rs-online.com/web/p/mosfet-transistors/6887204/
http://za.rs-online.com/web/p/mosfet-transistors/6887204/
I was just looking at these box mods from FT http://www.fasttech.com/products/1/10011526/2082101-beast-box-styled-mechanical-mod
What do you guys think of using copper tape instead of the wiring? It looks easier and takes up less space.
What do you guys think of using copper tape instead of the wiring? It looks easier and takes up less space.
I don't trust the copper tape with vaping stuff. I'd rather go for wiring.
Ok. So i know this has been a long project and the updates have been slow, but I have at last managed to finish this box mod. I already have the next design in my head, and that one will go alot quicker. But here are the pics:
And this one is a different door design that I am playing with.
And this one is a different door design that I am playing with.
Fantastic mateOk. So i know this has been a long project and the updates have been slow, but I have at last managed to finish this box mod. I already have the next design in my head, and that one will go alot quicker. But here are the pics:
And this one is a different door design that I am playing with.
I can imagine the joy of vaping your own creation, great stuff. Looks awesome man great job!!!
Thanks guys. She's my first, so she's very special
Haha, yes it is The y are nice and thin and quite powerfull
The y are nice and thin and quite powerfull
Similar threads
