Wpuld not use a bf pin on an ordinary mod. Juice gets into mods even without an invitation like this.
Regards
Wotofo Recurve RDA
- Thread starter MoneymanVape
- Start date
-
- Tags
- rda
Regards
Anyone try the 22mm conversion caps? Thoughts?
Can’t see the 22mm conversion doing anything more than reducing the outside diameter of the Recurve and making it lighter in weight. The orginal cap if you measure the inside diameter is already in the 20mm range, overall height is also similar to the orginal cap which is simple thicker, almost 4mm in some places.
At that price point you are not gaining anything other than a reduction in width. Other than the original Pico Squeeze Mod it seems pointless unless you want to change the colour of your Recurve or possibly like the Frosted or Ultem look
Last edited:
I know this is a very old thread to be reviving, but I have a question. I love my Recurves, but I hate having to squonk so often with those shallow juice wells. Has a yone ground some sort of wicking method that cut down on squonking? I considered the old Scottish Roll method, but I'm not sure if the tails will be flexible enough to bend using that method.
How often do you have to squonk?
I don’t thin my tails out at all and then when I squonk I basically soak the entire coil and cotton in juice so there’s plenty to go around!
Also don't thin out. Like every 3 to 4 hits i have to squonk at 45W and about 0.25 ohm.
Maybe go with a higher resistance coil. I usually use .4 ohm aliens in my Recurves and vape at 25-30 Watts which obviously reduces the juice consumption significantly but still offers nice flavour and clouds
Fair enough that is a lot of squonking.
still better than dripping every 3-4 hits
It's about how much I squonk. Especially with my Drop Deads. Those puppies are thirsty.
But it's so much of a habit now I don't even realise how much I squonk.
Currently on 0.28 ohm at 45W. On the Templar dual I was at 75W and it held quite a bit more juice. Problem with the Recurve is that I run one on a mech, so 0.4 ohm has a bit of a ramp up. Still a great rda though.
I’m still getting used to how much to squonk and when but really enjoying it though.
Why don’t you look for a “smaller” alien around the 0.4 mark like @Grand Guru suggested? Quicker ramp up on a mech and less juice consumption.
I’m using one of the nano aliens from white collar with a wrap removed and it’s at 0.42 and it isn’t a huge coil.
Should ramp up pretty quick on a mech I reckon.
I just invested in a couple of the Yellow White Collar aliens. Haven't installed them yet, but I do run the same Coilology coils in all my Recurves and Nitrous'. On the Nitrous it's perfect so far. What ID are those nano aliens? I prefer 3mm for 99% of my coils.
They’re 3mm. But a “big” 3mm if that makes senses. A bit loose on the 3mm portion of my coil tool thingymabob. But good coils nonetheless.
Single
Similar threads
