Again Decision Making... Kayfun Lite Plus Vs Taifun Gt And Others

[Tom]

So, it is time for more decisions. Tomorrow there should be both units available from the manufacturers. However, the Taifun GT is expected to sell very fast again. I have done extensive research in various forums on both tanks.

I will definitely go for one of the 2, no others made it to the short list. However, I am leaning at the moment to the Kayfun. If I would buy the Taifun with all extras (spare kit, air draw extensions and "the dripper" kit) it would set me back 200 euros. If I go for the Kayfun, which is equally good, it would set me back just under 85 euros, with the spares kit. For the latter is no dripper upgrade, but I would wait for the next batch of the masterpiece dripper hybrid itself (the Enigma, see you tube clip) ...

The first 1000 Enigmas were ready before Xmas, and sold out really fast. From what I read it was less then an hour, and their server did not cope with the requests....so, chances are slim to get one next time anyway. Hope dies last....

Then I have my first decent (original, not clone) setup together, however, what is still missing in the picture is a mech mod (@ our Vendors: still looking for a Nemesis clone, for starters) to have the Kayfun mounted on, if I feel like it.

 

[TylerD]

I don't have any experience with the Taifun, but I must say that my Kayfun lite is my baby. I even choose it over my Aqua for all day atty. It is reliable and I don't get dry hits, even if I push it. I would say that for less than half the price you can get the Kayfun. You can buy yourself a very good dripper with the rest and just interchange on the mod, without doing a new build for the dripper.
This is just my opinion and like I said, I have no experience with the Taifun.
You will not be dissapointed with the Kayfun.

 

[TylerD]

O, and if you want to, you can get a Atmizoo roller mod for 110 Euro to make up for the price of the Taifun.
http://www.atmizoo.com/shop/roller/?lang=en

 

[Tom]

yeah...the story with changing builds if you want to go dripper on the Taifun....that was my final concern with that setup. I rather save the extra bucks for other decent gear, me thinks. Now, it is also up to the manufacturers...i guess if Kayfun comes up first I will buy it immediately

from what I read both are equally good anyway, the Taifun is apparently a tad easier to rebuild tho. But its not that this should be an issue, I am technically minded anyway.

 

[Tom]

... and maybe waiting for the Enigma would be best. did you check the clip? These are plumes, and ongoing without having dry hits the guy in the clip is the one that designed it, btw.

 

[Andre]

Kayfun Lite Pls, cheaper, smaller in dimension but same volume juice, steel tank for those damaging juices, etc....hands down. That is other than a Reo, of course.

 

[TylerD]

That Enigma looks magic. Won't mind one myself!!!!

 

[RevnLucky7]

Hmmm.... it's a well machined dripper that stole it's design from the Origen dripper and got a mod attached to it. At R3000. I think they lost it a little. You're not going to archive anything with this that you can't achieve with any other dripper on the market.

The Kayfun is your best grab here. I'll be buy a lite myself as soon as I get back over there.

 

[TylerD]

I see it as dripper, mod and kick...... not bad....
http://www.intaste.de/Hybrid-Mods/Enigma-Hybrid::2225.html

 

[Tom]

@RevnLucky7 you are right, the price is high. but i enjoy the vaping, a lot. and if you enjoy something you want to have really good gear. from what i see you wanted the best as well. i don't want quantities...you know, like a desk full of attys and mods. One can only use one at a time, then you pick your favorites and the rest will be in the drawer.
i am planning to have eventually something like 2 decent tanks, 1 dripper, 2 VV/VW devices and 2 mechs (all of this for home and office use)...that all together would cost maybe 400-500 euros and then that will be it. at least for a while

for working at sites I am looking for the clones setup. It won't hurt if any of the devices break or get dents, scratches...

but that all might change again...it is an idea for the moment...but i will at least start now

 

[RevnLucky7]

Trying to help you find those great vapes brother and spare you all the expenses I had finding them.

Out of all the gear I ever owned the Kayfun remains in my top 2 and believe me I tried them all.

It looked like you were asking for advice. I offered some.

Sent from the Millennium Falcon

 

[Tom]

Trying to help you find those great vapes brother and spare you all the expenses I had finding them.

Out of all the gear I ever owned the Kayfun remains in my top 2 and believe me I tried them all.

It looked like you were asking for advice. I offered some.

Sent from the Millennium Falcon

I appreciate it! I am always listening to more experienced peeps. I just wanted to share my thoughts around it, why i got this worked out this way.

 

[Tom]

and i am already adhering to your advice....been looking at the Origen setup

 

[RevnLucky7]

Totally understand where you're going. I don't think you can go wrong with any of those choices.

I recommend you go with the cheaper of the 3. Odds are, you're going to like it best.

Sent from the Millennium Falcon

 

[RevnLucky7]

In fact. I'll stake my name on it.

Sent from the Millennium Falcon

 

[Tom]

I just got the vaping going for me now...it is time to get properly geared up. I enjoy planning things out, where I want to go with it. And I wanted to share my thoughts, hence my thread. And it bears fruits already....when I posted my thread I was still in between Kayfun and Taifun. Now, my mind is set on the Kayfun!

 

[RevnLucky7]

I actually checked VapeRevz site today and they were sold out. You find a supplier that has them?

Sent from the Millennium Falcon

 

[Tom]

nope, not yet. i think all good gear is out of stock, because of xmas.

 

[Tom]

there is a listing, where you have to sign up for. the next one coming up in Feb (source: german vape forum)

 

[Tom]

for me enough time, the dripper is anyway last item on the list. first need to get Kayfun, then something cloney for work.

 

[Silver]

The hunt for fun continues...

 

[Tom]

Step 1 done: Kayfun Lite Plus is ordered

 

[1am7h30n3]

@Tom , where did you order the kayfun from and how much did it cost you?

 

[RIEFY]

great step bro. the kayfun is a gift to vaping. I will be adding 2 more 2 my rotation coz thats all I will need. if you can try and get the evolve kickv2 it delivers a consistent vape through out the battery lifespan, that is off course if you going the mechanical route. if you going for a premium mechanical the roller is a perfect match for kayfun and the evolve.

by the way where did u order and can you give us pricing?

Sent from my GT-I9500 using Tapatalk HD

 

[Tom]

with a bit of accessories and postal 84 euros, delivery to german adress tho.

http://www.svoemesto.de/kayfun-lite-plus-14/kayfun-lite-plus.html?___store=en&___from_store=de