All Things Reo

[Rob Fisher]

is that with the brass only ?

Yip... I have never cut myself on the Stainless Steel one... mind you I use a Cyclone on the other REO and that has no sharp edges... let me check the other Reomiser... stand by... the stainless Reomiser isn't as sharp...

Maybe they rushed the build of the LP Brass Reomiser for my order? There were none in stock at the time and Rob made a plan for me and had one made... It still works like gangbusters and I won't make the mistake again... I have bled twice so far...

 

[Genosmate]

Can anyone help please? Since using my REO almost exclusively Iam getting very bad sore,cracked lips.Its no fun using lip balm every 5 minutes.Don't know if its to do with vapour from the reomiser or what it is.Anyway I really want to try one of those extra long drip tips to see if it helps,but I can't find any here in SA and FT will take too long.If anyone has one they don't use and would be prepared to sell or give to me and I'll replace with a new one it would be much appreciated.

 

[shabbar]

i think winter is the culprit here

 

[Genosmate]

i think winter is the culprit here

I wish it was but its not,I didn't get it last winter and I was vaping then as well.

 

[johan]

@Genosmate I had the same experience during my first week with the Reo, due to constant vaping and not putting the drip tip deeper between my lips.

 

[shabbar]

hmmm , try higher VG content in ur juice aswell and see if that helps

 

[The Golf]

lipbalm. iv never had this problem. Could be the driptip getting warm from chain vaping, longer drip tip may work. i use a stumpy and have to stop vaping before my lips burn

 

[Andre]

Can anyone help please? Since using my REO almost exclusively Iam getting very bad sore,cracked lips.Its no fun using lip balm every 5 minutes.Don't know if its to do with vapour from the reomiser or what it is.Anyway I really want to try one of those extra long drip tips to see if it helps,but I can't find any here in SA and FT will take too long.If anyone has one they don't use and would be prepared to sell or give to me and I'll replace with a new one it would be much appreciated.

I have one of those still in the plastic packet from FT. PM me your details and I can send it via Speed Services during the week?
????

 

[Rob Fisher]

I would like to thank Robert O'Neil for creating the REO and @Oupa for creating Menthol Ice! I have a fair amount of hardware on my desk right now and just chilling with one of my REO's vaping Vapour Mountain Menthol Ice with a dash of coconut concentrate is simply heaven!

 

[Andre]

I would like to thank Robert O'Neil for creating the REO and @Oupa for creating Menthol Ice! I have a fair amount of hardware on my desk right now and just chilling with one of my REO's vaping Vapour Mountain Menthol Ice with a dash of coconut concentrate is simply heaven!

View attachment 6142

Now, where in the world is that 18650 Woodvil?

 

[Rob Fisher]

Now, where in the world is that 18650 Woodvil?

My thoughts EXACTLY! Shipping from Rob is speedy! Shipping from normal US humans is a nightmare!

 

[shabbar]

ok so I have noticed some tiny sparking from the firing pin and + contact on the reo , is this normal ? dont want to short anything out .

1.2 ohm coil and purple series efest flat tops imr 18650 2100mah 35A

 

[Andre]

ok so I have noticed some tiny sparking from the firing pin and + contact on the reo , is this normal ? dont want to short anything out .

1.2 ohm coil and purple series efest flat tops imr 18650 2100mah 35A

Yip, quite normal. Enjoying the Reo?

 

[shabbar]

Too much .

Best decision ive ever made.

The vape quality is off the chain

 

[shabbar]

Also need to get used to squonking , I assume it will become second nature soon enough

 

[Rob Fisher]

Also need to get used to squonking , I assume it will become second nature soon enough

Yip I find a press and hold and then release works best for me. If you take the drip tip out and try the press and hold technique you will see what the juice does.

 

[RIEFY]

Yip I find a press and hold and then release works best for me. If you take the drip tip out and try the press and hold technique you will see what the juice does.

thats how it suppose to be done

Sent from my GT-I9500 using Tapatalk HD

 

[eviltoy]

thats how it suppose to be done

Sent from my GT-I9500 using Tapatalk HD

Dont listen to him he is a ReoNOT

 

[johan]

Also need to get used to squonking , I assume it will become second nature soon enough

Agree to what the others said; what I do is squonk for 3 seconds, release and see how many toots I get before a dry hit.

 

[RIEFY]

Dont listen to him he is a ReoNOT

dont forget who thought you how to use a reo lol

Sent from my GT-I9500 using Tapatalk HD

 

[eviltoy]

dont forget who thought you how to use a reo lol

Sent from my GT-I9500 using Tapatalk HD

*taught

 

[PeterHarris]

Here is a pic of Catherine just after a nice long bubble bath enjoying the sun....

Sent from my GT-I9500 using Tapatalk

 

[Silver]

Lovely @PeterHarris

Just a question for you and the other Reonauts,

Is it necesary to remove the whole feeder tube contraption when the REO goes for a bubble bath?

If so,
- how do you remove it? Do you just pull it out?
- And how do you put it back? Are there any special procedures or cautions?

 

[Rob Fisher]

Is it necesary to remove the whole feeder tube contraption when the REO goes for a bubble bath?

I'm not sure what the real situation is but I wouldn't remove it because it will clean fine by squirting water through it both ways and the tight fit will be compromised imo after removing it and putting it back. When I first got Keira that was an issue for me (the tube kept coming off) and I replaced the tube for a tight fit again and haven't removed it since and it's be 100's!

 

[Andre]

Lovely @PeterHarris

Just a question for you and the other Reonauts,

Is it necesary to remove the whole feeder tube contraption when the REO goes for a bubble bath?

If so,
- how do you remove it? Do you just pull it out?
- And how do you put it back? Are there any special procedures or cautions?

No, not necessary to remove it. It is attached to that nipple by a drop of superglue. If you want to remove it, just pull it off. Many people put it back and do not add superglue again. To use superglue - insert the tube onto the nipple leaving about 1 mm space, put drop of superglue into that space, push tube to the end and hold for 10 second or so. Done.