All Things Reo

Ok many thanks
I wont remove it unless I have to...
 
hey Guys - is there any one who has an extra repair kit and are willing to sell it, for i fear might have damaged the seal and if i get a repair kit i can do the subohm upgrade in one shot.....please :D
 
hey Guys - is there any one who has an extra repair kit and are willing to sell it, for i fear might have damaged the seal and if i get a repair kit i can do the subohm upgrade in one shot.....please :D

Peter I have one set still in packaging, but its not sub ohm
 
hey guys

i dont know if its just the vaper tounge, but it feels like i keep getting a burning taste from my reo.
i recoiled, and wicked, but still get that burnt tastse - is there something i might be missing or am i just imagining stuff ?
 
hey guys

i dont know if its just the vaper tounge, but it feels like i keep getting a burning taste from my reo.
i recoiled, and wicked, but still get that burnt tastse - is there something i might be missing or am i just imagining stuff ?

VAPER TONGUE - I'm going for 5 months and it is happening to me again this morning (2'nd time). I thought it will only happen once, but seems it can happen again :eek:. I'll vape Menthol mixed with all my sub-par e-liquid for the rest of the week.
 
VAPER TONGUE - I'm going for 5 months and it is happening to me again this morning (2'nd time). I thought it will only happen once, but seems it can happen again :eek:. I'll vape Menthol mixed with all my sub-par e-liquid for the rest of the week.
Oi that's the worst thing! Hate it. Hope it passes quickly Johan.
 
so the burning tatse i get is vaper tongue ?
as i could not tatse (and this is going to sound VERY WRONG) my wifes ...e-juice last night either, but it didnt taste like burn, like my reo does....
 
so the burning tatse i get is vaper tongue ?
as i could not tatse (and this is going to sound VERY WRONG) my wifes ...e-juice last night either, but it didnt taste like burn, like my reo does....

Wash the RM2 in boiling water (maybe some burnt juice in the RM2 reservoir? Try again. For me I haz the V.T yuk!
 
I must say that if my nose get congested in any way, I cannot taste my juice. I take shower and klap the menthol and then it's a bit beter. Thinking the steam in the shower works to clear up a bit of the sinusus.
 
I must say that if my nose get congested in any way, I cannot taste my juice. I take shower and klap the menthol and then it's a bit beter. Thinking the steam in the shower works to clear up a bit of the sinusus.

I mix in luke warm water: 1/2 bicarbonate of soda & 1/2 salt and snuff it through - feels like drowning, burning like hell but worth the pain.
 
Put some cayenne pepper on your tongue for a minute, especially the tip. Rub it in good. After awhile things will start to get really hot. This is good, keep at it for another minute before rinsing with cold water.

If for some reason that still doesn't reset the tastebuds, chew a few roasted coffee beans. That will surely do the trick.
 
ok so i just upgraded Catherine's insides to sub-ohm, also installed the new tube and possitive pin.
now i dont know if it just a placebo effect, but it feels as if the performance is way better, i am still runing he same coil, wick and juice....

either way i like it :)
 
ok so i just upgraded Catherine's insides to sub-ohm, also installed the new tube and possitive pin.
now i dont know if it just a placebo effect, but it feels as if the performance is way better, i am still runing he same coil, wick and juice....

either way i like it :)
Oh, for sure, there is a whole thread on this on ECF - almost all reported a marked improvement on the hit.
 
I have been experiencing very poor performance with my Reo the last few days. At first I suspected batteries, then top contact. I noticed some arcing taking place.

Another strange thing was the entire outer Reo casing felt like it was coated with a layer of juice, and I've been having to wipe it down every few hours.

The weird thing is I could not find any juice leaking anywhere, I have it working properly now though. I suspect the o-ring I was using below the rm2 was allowing juice to escape. Some of which makes its wAy down the 510 conn, along the positive contact - to the battery. Or vi the fire button hole to the contact.

Anyone else experienced similar issue?



Sent from my awesome Reo-mini.
 
Oh, you mean the RM2 connection with the 510 was not close enough, leaving space for juice to go the route you say. Sounds possible, do not know - never happened to me. Most leaks I get are from oversquonking and it goes via the air hole into impossible places.
 
1st thing i did with my wife's Reo was to replace the 1mm o-ring with a 1.5mm o ring....

i ordered 2 1mm and 2 1.5mm orings as spares, luckily i did, but i wont be using the 1mm orings
 
Oh, you mean the RM2 connection with the 510 was not close enough, leaving space for juice to go the route you say. Sounds possible, do not know - never happened to me. Most leaks I get are from oversquonking and it goes via the air hole into impossible places.

The source of my problem is definitely juice getting onto the positive copper contact. It feels like the battery is almost dead. After washing the whole unit in hot water, put the same battery back, and it fires like a v12 on steroids.

Now I need to find out how the juice is getting there. It can only be from below the 510 connection, which then connects to the positive plate.. Trapped inside the heat shrink perhaps?



Sent from my awesome Reo-mini.
 
The source of my problem is definitely juice getting onto the positive copper contact. It feels like the battery is almost dead. After washing the whole unit in hot water, put the same battery back, and it fires like a v12 on steroids.

Now I need to find out how the juice is getting there. It can only be from below the 510 connection, which then connects to the positive plate.. Trapped inside the heat shrink perhaps?



Sent from my awesome Reo-mini.
Send Rob from Reosmods an email (or PM on ECF) describing your problem in detail. He should have an answer. And let us know too should you go that route.
 
I'm first going to see if not using the oring solves the mystery. If the problem persists I will pm Rob.

Thanks :)


Sent from my awesome Reo-mini.
 
@Alex i had a similar problem . @Andre instructed me to tighten up the nipple thet the feeding tube connects to carefully. This improved things drastically for me
 
@Alex i had a similar problem . @Andre instructed me to tighten up the nipple thet the feeding tube connects to carefully. This improved things drastically for me

That sounds like the source of my problem thanks, gonna google it quick


Sent from my awesome Reo-mini.
 
@Alex i had a similar problem . @Andre instructed me to tighten up the nipple thet the feeding tube connects to carefully. This improved things drastically for me
Yes, but that was because yours had a new kit installed. Alex's came from the store installed, but am under correction with that. Yes, that is possibly it, maybe just check.
 
You can tighten it to some extent by using the actual tube as a sicket (if you know what I mean) then an extra careful turn with pliars
 
Back
Top