CLZ Dna 75c white screen

[klipdrifter]

Hi there fellow vapors!

I need your help.

My CLZ DNA 75C screen went white after I replaced my battery...



What I have tried:

Soft reboot in Escribe
Hard reboot in Escribe
Upload settings in Escribe
Replaced with a new battery

I did not drop the mod or have any juice leaking etc.

If anyone have some knowledge or if you know someone who does please tag them in this discussion.

Hope someone can assist me, this is my favourite baby and I want her working again.

 

[DarthBranMuffin]

seeing that you have done all the possible things to rectify it could now boil down to the screen being faulty. Just had a quick look on the evolve forum (https://forum.evolvapor.com/topic/69954-white-screen/) and the consensus seems that screen replacement is in your foreseeable future.

https://www.thevapeden.co.za/products/dna-replacement-color-screen?_pos=5&_sid=d251d817b&_ss=r

 

[Mzr]

Looks like you might just have to replace the screen.

 

[klipdrifter]

seeing that you have done all the possible things to rectify it could now boil down to the screen being faulty. Just had a quick look on the evolve forum (https://forum.evolvapor.com/topic/69954-white-screen/) and the consensus seems that screen replacement is in your foreseeable future.

https://www.thevapeden.co.za/products/dna-replacement-color-screen?_pos=5&_sid=d251d817b&_ss=r

Great post and very informative, my only gripe I can buy the screen but I've got no knowledge how to replace it... Do you maybe know someone?

 

[M.Adhir]

Either the screen or screen ribbon is gone.
Either way, replace the whole component.

 

[DarthBranMuffin]

Great post and very informative, my only gripe I can buy the screen but I've got no knowledge how to replace it... Do you maybe know someone?

Where are you based, so that we can find someone close to you that can help?

 

[klipdrifter]

Where are you based, so that we can find someone close to you that can help?

I stay in George, Western Cape. Basically in the middle between Port Elizabeth and Cape Town. I am willing to ship the mod with screen to someone...

 

[Mzr]

Great post and very informative, my only gripe I can buy the screen but I've got no knowledge how to replace it... Do you maybe know someone?

You could get into contact with @Fiki from mcclouds or if you like to why not just figure out how to gently remove the face plate where the buttons are and replace the screen yourself its something you should consider it really isnt that hard and you would judt require a ceramic tweezer to remove the old one and replace with a new think of it as getting to know your mod on a deeper level

 

[klipdrifter]

So, before I bought a new screen I first tried to figure out how to get the old one out. I've tried searching on Google/YouTube but there is no info for the CLZ mod and disassembly.

Then I started doing my own investigation by trying to remove the 510 connection plate at the top, but then realised there is a wire connected inside the mod preventing me from getting the screen remove from the top.

I then tried removing the battery tube but this as well is connected to the same wire as the 510 plate.

My conclusion, you have to remove the pressed fit piece of plastic/delrin/resin to be able to remove the screen and this is where I decided this job is above my handy man expertise.

I've tried contacting the mod maker to find out more, but someone on this forum informed me the mod maker disappeared and no longer do mods...

I am now once again asking if there is anyone in SA that has the knowledge to disassemble the screen and install a new one.

See below a screenshot of the press fit piece, that I beleive is the way to get the screen out....